Intelligent and integrated RFID (II-RFID) system for improving traceability in manufacturing

doi:10.1007/s40436-014-0053-6

Advances in Manufacturing ›› 2014, Vol. 2 ›› Issue (2): 106-120.doi: 10.1007/s40436-014-0053-6

Intelligent and integrated RFID (II-RFID) system for improving traceability in manufacturing

Ke-Sheng Wang^1,2

1. Shanghai Key Laboratory of Intelligent Manufacturing and Robotics, Shanghai University, Shanghai 200072,People’s Republic of China
2. Knowledge Discovery Laboratory, Department of Production and Quality Engineering, Norwegian University of Science and Technology, N-7491 Trondheim, Norway

收稿日期:2013-12-12 修回日期:2014-01-14 出版日期:2014-06-28 发布日期:2014-02-11
通讯作者: e-mail: kesheng.wang@ntnu.no
作者简介:e-mail: kesheng.wang@ntnu.no

Intelligent and integrated RFID (II-RFID) system for improving traceability in manufacturing

Ke-Sheng Wang^1,2

1. Shanghai Key Laboratory of Intelligent Manufacturing and Robotics, Shanghai University, Shanghai 200072,People’s Republic of China
2. Knowledge Discovery Laboratory, Department of Production and Quality Engineering, Norwegian University of Science and Technology, N-7491 Trondheim, Norway

Received:2013-12-12 Revised:2014-01-14 Online:2014-06-28 Published:2014-02-11
Contact: e-mail: kesheng.wang@ntnu.no
About author:e-mail: kesheng.wang@ntnu.no

摘要/Abstract

摘要： In the wake of globalization, many modern manufacturing companies in Norway have come under intense pressure caused by increased competition, stricter government regulation, and customer demand for higher value at low cost in a short time. Manufacturing companies need traceability, which means a real-time view into their production processes and operations. Radio frequency identification (RFID) technology enables manufacturing companies to gain instant traceability and visibility because it handles manufactured goods, materials and processes transparently. RFID has become an important driver in
manufacturing and supply chain activities. However, there is still a challenge in effectively deploying RFID in manufacturing. This paper describes the importance for Norwegian manufacturing companies to implement RFID technology, and shows how the intelligent and integrated RFID (II-RFID) system, which has been developed in the Knowledge Discovery Laboratory of Norwegian University of Science and Technology, provides instant traceability
and visibility into manufacturing processes. It supports the Norwegian manufacturing industries survive and thrive in global competition. The future research work will focus on the field of RFID data mining to support decision-making process in manufacturing.

关键词: Radio frequency identification (RFID) , Intelligent manufacturing , Traceability , Visibility , System integration, Intelligent decision support systems

Abstract: In the wake of globalization, many modern manufacturing companies in Norway have come under intense pressure caused by increased competition, stricter government regulation, and customer demand for higher value at low cost in a short time. Manufacturing companies need traceability, which means a real-time view into their production processes and operations. Radio frequency identification (RFID) technology enables manufacturing companies to gain instant traceability and visibility because it handles manufactured goods, materials and processes transparently. RFID has become an important driver in
manufacturing and supply chain activities. However, there is still a challenge in effectively deploying RFID in manufacturing. This paper describes the importance for Norwegian manufacturing companies to implement RFID technology, and shows how the intelligent and integrated RFID (II-RFID) system, which has been developed in the Knowledge Discovery Laboratory of Norwegian University of Science and Technology, provides instant traceability
and visibility into manufacturing processes. It supports the Norwegian manufacturing industries survive and thrive in global competition. The future research work will focus on the field of RFID data mining to support decision-making process in manufacturing.

Key words: Radio frequency identification (RFID) , Intelligent manufacturing , Traceability , Visibility , System integration, Intelligent decision support systems

Ke-Sheng Wang. Intelligent and integrated RFID (II-RFID) system for improving traceability in manufacturing[J]. Advances in Manufacturing, 2014, 2(2): 106-120.

参考文献

1. Chryssolouris G et al (2009) Digital manufacturing: history,perspectives, and outlook. J Eng Manuf 223(5):451–462

2. Jr Quirk RE (2007) RFID’s new challenge. Traffic World 271(12):19–21

3. Wang K, Yu Q, Ricke K (2013) Feasibility study of RFID (radio frequency identification) for Hansen protection AS. SINTEF report, No. A24703, ISBN: 9788214056105, Trondheim

4. Gunther O, Kletti W, Kubach U (2008) RFID in manufacturing.Springer, Berlin

5. Laniel M, Emond JP, Altunbas AE (2008) RFID behavior study in enclosed trailer/container for real time temperature tracking.In: Food processing automation conference, Providence, Rhode Island, USA

6. Abad E, Palacio F, Nuin M et al (2009) RFID smart tag for traceability and cold chain monitoring of foods: demonstration in an intercontinental fresh fish logistic chain. J Food Eng 93(4):394–399

7. Lewis S (2004) A basic introduction to RFID technology and its use in the supply chain. Laran RFID, White Paper

8. Emond JP, Nicometo M (2006) Shelf-life prediction and FEFO inventory management with RFID. In: The cool chain association workshop: temperature measurements when, where and how?Knivsta, Sweden

9. Koutsoumanis K, Taoukis PS, Nychas GJE (2005) Development of a safety monitoring and assurance system for chilled food products. Int J Food Microbiol 100(1–3):253–260

10. Saygin C, Sarangapani J, Grasman SE (2007) A systems approach to viable RFID implementation in the supply chain.Springer series in advanced manufacturing, pp 3–27

11. Cabanes G, Bennani Y, Chartagnat C et al (2008) Topographic connectionist unsupervised learning for RFID behavior data mining. In: Proceedings of the 2nd international workshop on RFID technology—concepts, applications, challenges, IWRT 2008, pp 63–72

12. El-Sobky H, AbdelAzeim M (2011) A novel model for capturing and analyzing customers’ references for ceramic tiles, secondary a novel model for capturing and analyzing customers’ references for ceramic tiles, pp 460–465

13. Ho GTS, Choy KL, Poon TC (2010) Providing decision support functionality in warehouse management using the RFID-based fuzzy association rule mining approach. In: Proceedings of 2010 8th international conference on supply chain management and information systems (SCMIS), Hong Kong, China

14. Masciari E (2011) Trajectory outlier detection using an analytical approach. In: 23rd IEEE international conference on tools with artificial intelligence (ICTAI), 2011, pp 377–384

15. Huang GQ, Wright PK, Newman ST (2009) Wireless manufacturing: a literature review, recent developments, and case studies.Int J Comput Integr Manuf 22(7):579–594

16. Mo JPT et al (2009) Directional discrimination in radio frequency identification system for materials flow control in manufacturing and supply chain. Proc Inst Mech Eng B 223(7):875–883

17. Brintrup A, Ranasinghe D, McFarlane D (2010) RFID opportunity analysis for leaner manufacturing. Int J Product Res 48(9):2745–2764

18. Ren Z, Anumba CJ, Tah J (2010) RFID-facilitated construction materials management (RFID-CMM)—a case study of watersupply project. Adv Eng Inf 25(2):198–207

19. Huang GQ et al (2008) RFID-enabled real-time wireless manufacturing for adaptive assembly planning and control. J Intell Manuf 19(6):701–713

20. Yu Q, Wang Y, Wang K (2012) Extracting associative rules for RFID data. In: Proceedings of IWAMA 2012 (international workshop of advanced manufacturing and automation). Tapir Academic Publisher, Trondheim, pp 467–474

21. Wang K, Yu Q, Wang Y (2013) RFID based data mining for E-logistics. In: ICE-B 2013 (intentional conference of e-business),

29–31 July, 2013, Reykevik, Iceland

22. Rockwell Automation (2004) RFID in manufacturing—a practical guide on extracting measureable value from RFID implementations in plant and warehouse operation. (www.rockwellautomation.com)

[1]	Li-Lan Liu ? Zi-Long Yuan ? Xue-Wei Liu ?Cheng Chen ? Ke-Sheng Wang. RFID unreliable data filtering by integrating adaptive sliding window and Euclidean distance[J]. Advances in Manufacturing, 2014, 2(2): 121-129.
[2]	Emrah Arica ? Daryl J. Powell. A framework for ICT-enabled real-time production planning and control[J]. Advances in Manufacturing, 2014, 2(2): 158-164.
[3]	Hirpa G. Lemu. Current status and challenges of using geometric tolerance information in intelligent manufacturing systems[J]. Advances in Manufacturing, 2014, 2(1): 13-21.
[4]	K. E. Aasmundtveit B. Q. Ta Q.-H. Nguyen T. B. Haugen N. Hoivik E. Halv. Local synthesis of carbon nanotubes for direct integration in Simicrosystems – design considerations[J]. Advances in Manufacturing, 2013, 1(3): 218-225.

Intelligent and integrated RFID (II-RFID) system for improving traceability in manufacturing

Intelligent and integrated RFID (II-RFID) system for improving traceability in manufacturing

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

编辑推荐

Metrics

本文评价