The fit of Industry 4.0 applications in manufacturing logistics: a multiple case study

doi:10.1007/s40436-017-0200-y

摘要/Abstract

摘要：

The fourth industrial revolution, Industry 4.0, is expected to cause disruptive changes in industrial production. It is driven by rapid technological developments and the need for manufacturing companies to make themselves independent of high labor costs. Industry 4.0 concerns several aspects of industrial production, including manufacturing logistics, business models and products and services. The applications of Industry 4.0 have been vastly outlined. However, the fit of Industry 4.0 applications in different production environments is not clear. The purpose of this paper is to identify and investigate the Industry 4.0 technologies that are applicable to manufacturing logistics, and how the production environment influences the applicability of these technologies. This is done through a multiple case study of four Norwegian manufacturing companies. The findings from the study indicate that the applicability of Industry 4.0 in manufacturing logistics is dependent on the production environment. Companies with a low degree of production repetitiveness see less potential in applying Industry 4.0 technologies in manufacturing logistics, while companies with a highly repetitive production see a higher potential.

The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-017-0200-y/fulltext.html

关键词: Industry 4.0, Manufacturing logistics, Production planning and control, Production environment

Abstract:

Key words: Industry 4.0, Manufacturing logistics, Production planning and control, Production environment

Jo Wessel Strandhagen, Erlend Alfnes, Jan Ola Strandhagen, Logan Reed Vallandingham. The fit of Industry 4.0 applications in manufacturing logistics: a multiple case study[J]. Advances in Manufacturing, 2017, 5(4): 344-358.

参考文献

1. Kagermann H, Helbig J, Hellinger A et al (2013) Securing the future of German manufacturing industry recommendations for implementing the strategic initiative Industry 4.0. Final report of the Industrie 4.0 working group. Forschungsunion, pp 1-84
2. Jonsson P, Mattsson SA (2003) The implications of fit between planning environments and manufacturing planning and control methods. Int J Oper Prod Manag 23(8):872-900
3. MacCarthy BL, Fernandes FCF (2000) A multi-dimensional classification of production systems for the design and selection of production planning and control systems. Prod Plan Control 11(5):481-496
4. Lasi H, Fettke P, Kemper HG et al (2014) Industry 4.0. business & information. Syst Eng 6(4):239-242
5. Hermann M, Pentek T, Otto B (2016) Design principles for Industrie 4.0 scenarios. In:The 49th Hawaii international conference on system sciences (HICSS) IEEE, pp 3928-3937
6. Wang S, Wan J, Li D et al (2016) Implementing smart factory of Industrie 4.0:an outlook. Int J Distrib Sensor Netw 12:3159805
7. Brettel M, Friederichsen N, Keller M et al (2014) How virtualization, decentralization and network building change the manufacturing landscape:an Industry 4.0 perspective. Int J Mech Ind Sci Eng 8(1):37-44
8. European Commission (2004) Manufuture:a vision for 2020, assuring the future of manufacturing in Europe
9. Stock T, Seliger G (2016) Opportunities of sustainable manufacturing in Industry 4.0. Proc CIRP 40:536-541
10. Lin HW, Nagalingam SV, Kuik SS et al (2012) Design of a global decision support system for a manufacturing SME:towards participating in collaborative manufacturing. Int J Prod Econ 136(1):1-12
11. Lee EA (2008) Cyber physical systems:design challenges. In:11th IEEE international symposium on object oriented real-time distributed computing (ISORC), IEEE, pp 363-369
12. Lee J, Bagheri B, Kao HA (2015) A cyber-physical systems architecture for Industry 4.0-based manufacturing systems. Manuf Lett 3:18-23
13. Slack N, Chambers S, Johnston R (2010) Operations management. Pearson Education, London
14. Anderl R (2014) Industrie 4.0-advanced engineering of smart products and smart production. In:19th international seminar on high technology, technological innovations in the product development, Piracicaba, Brazil
15. Lucke D, Constantinescu C, Westkämper E (2008) Smart factorya step towards the next generation of manufacturing. In:Mitsuishi M, Ueda K, Kimura F (eds) Manufacturing systems and technologies for the new frontier, Springer:London, pp 115-118
16. Radziwon A, Bilberg A, Bogers M et al (2014) The smart factory:exploring adaptive and flexible manufacturing solutions. Proc Eng 69:1184-1190
17. Yoon JS, Shin SJ, Suh SH (2012) A conceptual framework for the ubiquitous factory. Int J Prod Res 50(8):2174-2189
18. Dopico M, Gomez A, De la Fuente D et al (2016) A vision of Industry 4.0 from an artificial intelligence point of view. In:International conference on artificial intelligence (ICAI). The steering committee of the world congress in computer science, computer engineering and applied computing (WorldComp), pp 407-413
19. Li BH, Hou BC, Yu WT et al (2017) Applications of artificial intelligence in intelligent manufacturing:a review. Front Inf Technol Electr Eng 18(1):86-96
20. McAfee A, Brynjolfsson E, Davenport TH et al (2012) Big data. The management revolution. Harvard Bus Rev 90(10):61-67
21. Sagiroglu S, Sinanc D (2013) Big data:a review. In:International conference on collaboration technologies and systems (CTS). IEEE, pp 42-47
22. Rüßmann M, Lorenz M, Gerbert P et al (2015) Industry 4.0:the future of productivity and growth in manufacturing industries. Boston Consulting Group, Boston, p 14
23. Reif R, Walch D (2008) Augmented & virtual reality applications in the field of logistics. Vis Comput 24(11):987-994
24. Wang X, Ong S, Nee C (2016) A comprehensive survey of augmented reality assembly research. Adv Manuf 4(1):1-22
25. McFarlane D, Sarma S, Chirn JL et al (2003) Auto ID systems and intelligent manufacturing control. Eng Appl Artif Intell 16(4):365-376
26. Ilie-Zudor E, Kemény Z, Van Blommestein F et al (2011) A survey of applications and requirements of unique identification systems and RFID techniques. Comput Ind 62(3):227-252
27. Xiao Y, Yu S, Wu K et al (2007) Radio frequency identification:technologies, applications, and research issues. Wirel Commun Mobile Comput 7(4):457-472
28. Atzori L, Iera A, Morabito G (2010) The internet of things:a survey. Comput Netw 54(15):2787-2805
29. Shrouf F, Ordieres J, Miragliotta G (2014) Smart factories in Industry 4.0:a review of the concept and of energy management approached in production based on the Internet of things paradigm. In:International conference on industrial engineering and engineering management (IEEM) IEEE, pp 697-701
30. Arica E, Powell DJ (2014) A framework for ICT-enabled realtime production planning and control. Adv Manuf 2(2):158-164
31. Xu X (2012) From cloud computing to cloud manufacturing. Robot Comput Integr Manuf 28(1):75-86
32. Zhang L, Luo Y, Tao F et al (2014) Cloud manufacturing:a new manufacturing paradigm. Enterp Inf Syst 8(2):167-187
33. Li BH, Zhang L, Wang SL et al (2010) Cloud manufacturing:a new service-oriented networked manufacturing model. Comput Integr Manuf Syst 16(1):1-7
34. OECD (2017) The next production revolution:implications for governments and business. OECD Publishing, Paris
35. Rüßmann M, Lorenz M, Gerbert P et al (2015) Industry 4.0:the future of productivity and growth in manufacturing industries. Boston Consulting Group, Boston, p 9
36. Holmström J, Partanen J, Tuomi J et al (2010) Rapid manufacturing in the spare parts supply chain:alternative approaches to capacity deployment. J Manuf Technol Manag 21(6):687-697
37. Khajavi SH, Partanen J, Holmström J (2014) Additive manufacturing in the spare parts supply chain. Comput Ind 65(1):50-63
38. Lödding H (2012) Handbook of manufacturing control:fundamentals, description, configuration. Springer Science & Business Media, Berlin
39. Olhager J, Rudberg M (2002) Linking manufacturing strategy decisions on process choice with manufacturing planning and control systems. Int J Prod Res 40(10):2335-2351
40. Schönsleben P (2007) Integral logistics management:operations and supply chain management in comprehensive value-added networks. CRC Press, Boca Raton
41. Newman WR, Sridharan V (1995) Linking manufacturing planning and control to the manufacturing environment. Integr Manuf Syst 6(4):36-42
42. Ptak CA, Schragenheim E (2003) ERP:tools, techniques, and applications for integrating the supply chain. CRC Press, Boca Raton
43. APICS online dictionary
44. Stevenson M, Hendry LC, Kingsman BG (2005) A review of production planning and control:the applicability of key concepts to the make-to-order industry. Int J Prod Res 43(5):869-898
45. Fernandes FCF, Godinho Filho M (2011) Production control systems:literature review, classification, and insights regarding practical application. Afr J Bus Manag 5(14):5573-5582
46. Yin RK (2013) Case study research:design and methods. Sage publications, Thousand Oaks
47. Forza C (2002) Survey research in operations management:a process-based perspective. Int J Oper Prod Manag 22(2):152-194
48. Kitzinger J (1995) Qualitative research. Introducing focus groups. BMJ 311(7000):299-302
49. Wortmann JC (1992) Production management systems for oneof-a-kind products. Comput Ind 19(1):79-88
50. Gosling J, Naim MM (2009) Engineer-to-order supply chain management:a literature review and research agenda. Int J Prod Econ 122(2):741-754

[1]	Harald Rødseth, Per Schjølberg, Andreas Marhaug. Deep digital maintenance[J]. Advances in Manufacturing, 2017, 5(4): 299-310.
[2]	Yi Wang, Hai-Shu Ma, Jing-Hui Yang, Ke-Sheng Wang. Industry 4.0: a way from mass customization to mass personalization production[J]. Advances in Manufacturing, 2017, 5(4): 311-320.
[3]	C. K. M. Lee, S. Z. Zhang, K. K. H. Ng. Development of an industrial Internet of things suite for smart factory towards re-industrialization[J]. Advances in Manufacturing, 2017, 5(4): 335-343.
[4]	Jan Ola Strandhagen, Logan Reed Vallandingham, Giuseppe Fragapane, Jo Wessel Strandhagen, Aili Biriita Hætta Stangeland, Nakul Sharma. Logistics 4.0 and emerging sustainable business models[J]. Advances in Manufacturing, 2017, 5(4): 359-369.
[5]	Zhe Li, Yi Wang, Ke-Sheng Wang. Intelligent predictive maintenance for fault diagnosis and prognosis in machine centers: Industry 4.0 scenario[J]. Advances in Manufacturing, 2017, 5(4): 377-387.
[6]	Wladimir Bodrow. Impact of Industry 4.0 in service oriented firm[J]. Advances in Manufacturing, 2017, 5(4): 394-400.
[7]	Emrah Arica ? Daryl J. Powell. A framework for ICT-enabled real-time production planning and control[J]. Advances in Manufacturing, 2014, 2(2): 158-164.