Efficient determination of stability lobe diagrams by in-process varying of spindle speed and cutting depth

doi:10.1007/s40436-018-0225-x

Advances in Manufacturing ›› 2018, Vol. 6 ›› Issue (3): 272-279.doi: 10.1007/s40436-018-0225-x

Efficient determination of stability lobe diagrams by in-process varying of spindle speed and cutting depth

Christian Brecher, Prateek Chavan, Alexander Epple

Laboratory for Machine Tools and Production Engineering(WZL), RWTH Aachen University, Campus-Boulevard 30, 52074 Aachen, Germany

收稿日期:2017-09-29 修回日期:2018-04-23 出版日期:2018-09-25 发布日期:2018-09-18
通讯作者: Prateek Chavan,p.chavan@wzl.rwth-aachen.de E-mail:p.chavan@wzl.rwth-aachen.de
基金资助:
This work was funded as part of the DFG Project "Efficient determination of Stability Lobe Diagrams" (Grant No. BR 2905/73-1).

Efficient determination of stability lobe diagrams by in-process varying of spindle speed and cutting depth

Christian Brecher, Prateek Chavan, Alexander Epple

Laboratory for Machine Tools and Production Engineering(WZL), RWTH Aachen University, Campus-Boulevard 30, 52074 Aachen, Germany

Received:2017-09-29 Revised:2018-04-23 Online:2018-09-25 Published:2018-09-18
Contact: Prateek Chavan,p.chavan@wzl.rwth-aachen.de E-mail:p.chavan@wzl.rwth-aachen.de
Supported by:
This work was funded as part of the DFG Project "Efficient determination of Stability Lobe Diagrams" (Grant No. BR 2905/73-1).

摘要/Abstract

摘要： The experimental determination of stability lobe diagrams (SLDs) in milling can be realized by either continuously varying the spindle speed or by varying the depth of cut. In this paper, a method for combining both these methods along with an online chatter detection algorithm is proposed for efficient determination of SLDs. To accomplish this, communication between the machine control and chatter detection algorithm is established, and the machine axes are controlled to change the spindle speed or depth of cut. The efficiency of the proposed method is analyzed in this paper.

The full text can be downloaded at https://link.springer.com/content/pdf/10.1007%2Fs40436-018-0225-x.pdf

关键词: Chatter detection, Poincaré, Cutting depth variation, Spindle speed

Abstract: The experimental determination of stability lobe diagrams (SLDs) in milling can be realized by either continuously varying the spindle speed or by varying the depth of cut. In this paper, a method for combining both these methods along with an online chatter detection algorithm is proposed for efficient determination of SLDs. To accomplish this, communication between the machine control and chatter detection algorithm is established, and the machine axes are controlled to change the spindle speed or depth of cut. The efficiency of the proposed method is analyzed in this paper.

The full text can be downloaded at https://link.springer.com/content/pdf/10.1007%2Fs40436-018-0225-x.pdf

Key words: Chatter detection, Poincaré, Cutting depth variation, Spindle speed

Christian Brecher, Prateek Chavan, Alexander Epple. Efficient determination of stability lobe diagrams by in-process varying of spindle speed and cutting depth[J]. Advances in Manufacturing, 2018, 6(3): 272-279.

参考文献

1. Tlusty J, Ismail F (1981) Basic non-linearity in machining chatter. Ann CIRP 30:299-304
2. Altintas Y, Budak E (1995) Analytical prediction of stability lobes in milling. Ann CIRP 44:357-362
3. Altintas Y, Budak E (1998) Analytical prediction of chatter stability in milling-part I:general formulation. J Dyn Syst Meas Control 120(1):22-30
4. Altintas Y, Budak E (1998) Analytical prediction of chatter stability in milling-part Ⅱ:application of the general formulation to common milling systems. J Dyn Syst Meas Control 120(1):31-36
5. Quintana G, Ciurana J, Teixidor D (2008) A new experimental methodology for identification of stability lobes diagram in milling operations. Mach Tools Manuf 48:1637-1645
6. Grossi N, Scippa A, Sallese L et al (2015) Spindle speed ramp-up test:a novel experimental approach for chatter stability detection. Mach Tools Manuf 89:221-230
7. Davies MA, Dutterer B, Pratt JR et al (1998) On the dynamics of high-speed milling with long, slender endmills. Ann CIRP 47:55-60
8. Surmann T (2005) Geometric-physical simulation of the process dynamics for five-axis milling of free-form surface. Dissertation, Dortmund University
9. Honeycutt A, Schmitz T (2016) A new metric for automated stability identification in time domain milling simulation. J Manuf Sci Eng 138(7):074501
10. Schmitz T, Medicus K, Dutterer B (2002) Exploring once-perrevolution audio signal variance as a chatter indicator. Mach Sci Technol 6(2):215-233
11. Brecher C, Epple A, Fey M (2014) Efficient determination of optimal process parameter. wtWerkstatttechnik online 104:260-265
12. Brecher C, Kiesewetter C, Epple A et al (2015) Automated creation of stability lobes diagrams for milling. ZWF 110(4):191-195
13. Brecher C, Chavan P, Epple A (2017) Efficient determination of stability boundaries. wtWerkstattstechnik online 107(5):313-317
14. Brecher C, Daniels M, Wellmann F et al (2015) Realisation of efficient cutting processes. Result report of the BMBF-joint project ReffiZ. Shaker-Verlag, Aachen

Efficient determination of stability lobe diagrams by in-process varying of spindle speed and cutting depth

Efficient determination of stability lobe diagrams by in-process varying of spindle speed and cutting depth

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价