Development of metal-organic deposition-derived second-generation high-temperature superconductor tapes and artificial flux pinning

doi:10.1007/s40436-023-00447-z

Advances in Manufacturing ›› 2023, Vol. 11 ›› Issue (3): 523-540.doi: 10.1007/s40436-023-00447-z

Development of metal-organic deposition-derived second-generation high-temperature superconductor tapes and artificial flux pinning

Dong-Xu Wang¹, Jing Chen¹, Di-Fan Zhou¹, Chuan-Bing Cai^1,2

1 Shanghai Key Laboratory of High Temperature Superconductors, Shanghai Frontiers Science Center of Quantum and Superconducting Matter States, Department of Physics, Shanghai University, Shanghai 200444, People's Republic of China;
2 Shanghai Creative Superconductor Technologies Co. Ltd., Shanghai 201401, People's Republic of China

收稿日期:2022-08-03 修回日期:2022-10-09 出版日期:2023-09-09 发布日期:2023-09-09
通讯作者: Chuan-Bing Cai,E-mail:cbcai@t.shu.edu.cn E-mail:cbcai@t.shu.edu.cn
作者简介:Dong-Xu Wang is a Master's candidate at the Shanghai Key Laboratory of High-Temperature Superconductors, Shanghai University. His research interests include preparation and applications of second-generation superconductors.
Jing Chen is a Ph.D. candidate at the Shanghai Key Laboratory of High Temperature Superconductors, Shanghai University. Her research interests include the chemical preparation of REBCO tapes and flux pinning.
Di-Fan Zhou is a lecturer at Shanghai University. He received his doctoral degree at the Tokyo University of Marine Science and Technology and has been dedicated to the research field of applied superconductivity for more than 10 years.
Chuan-Bing Cai is a professor at Shanghai University and the director of the Shanghai Key Laboratory of High-Temperature Superconductors. His main research interests include hightemperature superconductor materials, electromagnetic performance, processing mechanisms, and key technologies for power applications.
基金资助:
This work was supported in part by the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No. XDB25000000), by the National Natural Science Foundation (Grant No. 52172271), and by the National Key R&D Program of China (Grant No. 2022YFE03150200).

Development of metal-organic deposition-derived second-generation high-temperature superconductor tapes and artificial flux pinning

Dong-Xu Wang¹, Jing Chen¹, Di-Fan Zhou¹, Chuan-Bing Cai^1,2

1 Shanghai Key Laboratory of High Temperature Superconductors, Shanghai Frontiers Science Center of Quantum and Superconducting Matter States, Department of Physics, Shanghai University, Shanghai 200444, People's Republic of China;
2 Shanghai Creative Superconductor Technologies Co. Ltd., Shanghai 201401, People's Republic of China

Received:2022-08-03 Revised:2022-10-09 Online:2023-09-09 Published:2023-09-09
Contact: Chuan-Bing Cai,E-mail:cbcai@t.shu.edu.cn E-mail:cbcai@t.shu.edu.cn
Supported by:
This work was supported in part by the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No. XDB25000000), by the National Natural Science Foundation (Grant No. 52172271), and by the National Key R&D Program of China (Grant No. 2022YFE03150200).

摘要/Abstract

摘要： The second-generation high-temperature superconductor tape (2G-HTS, also known as a coated conductor) based on REBaCuO (REBa₂Cu₃O_7-δ) exhibits high current density and potential cost-effective price/performance, compared with conventional superconducting materials. Using commercial 2G-HTS tapes, more than a dozen cable vendors had been manufacturing REBCO cables, such as the latest kilometer-class REBCO cable, which was incorporated into a civil grid on December 2021, as part of the recordbreaking 35-kV-voltage superconductor cable demonstration project in downtown Shanghai. This paper describes the development of HTS-coated conductors, then outlines the various technological routes for their preparation, reviews the artificial flux pinning of coated conductors, and finally summarizes the technological breakthroughs, the latest research advances, and provides an outlook on their application prospects.

The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-023-00447-z

关键词: High-temperature superconductors, RE123 superconductor tapes, Chemical solution deposition, Flux pinning

Abstract: The second-generation high-temperature superconductor tape (2G-HTS, also known as a coated conductor) based on REBaCuO (REBa₂Cu₃O_7-δ) exhibits high current density and potential cost-effective price/performance, compared with conventional superconducting materials. Using commercial 2G-HTS tapes, more than a dozen cable vendors had been manufacturing REBCO cables, such as the latest kilometer-class REBCO cable, which was incorporated into a civil grid on December 2021, as part of the recordbreaking 35-kV-voltage superconductor cable demonstration project in downtown Shanghai. This paper describes the development of HTS-coated conductors, then outlines the various technological routes for their preparation, reviews the artificial flux pinning of coated conductors, and finally summarizes the technological breakthroughs, the latest research advances, and provides an outlook on their application prospects.

The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-023-00447-z

Key words: High-temperature superconductors, RE123 superconductor tapes, Chemical solution deposition, Flux pinning

Dong-Xu Wang, Jing Chen, Di-Fan Zhou, Chuan-Bing Cai. Development of metal-organic deposition-derived second-generation high-temperature superconductor tapes and artificial flux pinning[J]. Advances in Manufacturing, 2023, 11(3): 523-540.

参考文献

1. Park T, Park E, Lee H et al (2008) Pressure-induced superconductivity in CaFe₂As₂. J Phys-Condens Mat 20(32):322204. https://doi.org/10.1088/0953-8984/20/32/322204
2. Larbalestier D, Gurevich A, Feldmann DM et al (2001) High-T_c superconducting materials for electric power applications. Nature 414(6961):368-377
3. Crisan A (2017) Vortices and nanostructured superconductors. Springer, Berlin
4. Breit V, Schweiss P, Hauff R et al (1995) Evidence for chain superconductivity in near-stoichiometric YBa₂Cu₃O_7-δ single crystals. Phys Rev B 52(22):15727-15730
5. Macmanus-Driscoll JL, Wimbush SC (2021) Processing and application of high-temperature superconducting coated conductors. Nat Rev Mater 6(7):587-604
6. Foltyn SR, Civale L, Macmanus-Driscoll JL et al (2007) Materials science challenges for high-temperature superconducting wire. Nat Mater 6(9):631-642
7. Teresa P, Xavier O (2014) Coated conductors for power applications: materials challenges. Supercon Sci Tech 27(4):044003. https://doi.org/10.1088/0953-2048/27/4/044003
8. Xu A, Delgado L, Gharahcheshmeh MH et al (2015) Strong correlation between J c(T, H||c) and Jc(77 K, 3 T||c) in Zr-added (Gd, Y)BaCuO coated conductors at temperatures from 77 down to 20 K and fields up to 9 T. Supercond Sci Technol 28(8):082001. https://doi.org/10.1088/0953-2048/28/8/082001
9. Mankiewich PM, Scofield JH, Skocpol WJ et al (1987) Reproducible technique for fabrication of thin films of high transition temperature superconductors. Appl Phys Lett 51(21):1753-1755
10. Gupta A, Jagannathan R, Cooper EI et al (1988) Superconducting oxide films with high transition temperature prepared from metal trifluoroacetate precursors. Appl Phys Lett 52(24):2077-2079
11. Smith JA, Cima MJ, Sonnenberg N (1999) High critical current density thick MOD-derived YBCO films. IEEE T Appl Supercon 9(2):1531-1534
12. Dawley JT, Clem PG, Boyle T et al (2004) Rapid processing method for solution deposited YBa₂Cu₃O_7-δ thin films. Physica C 402(1):143-151
13. Rupich MW, Schoop U, Verebelyi DT et al (2009) The development of second generation HTS wire at American superconductor. IEEE T Appl Supercon 19(2):3231-3235
14. Malozemoff AP, Fleshler S, Rupich M et al (2007) Progress in HTS coated conductors and their applications. Supercon Sci Tech 21(3):034005. https://doi.org/10.1088/0953-2048/21/3/034005
15. Cui XM, Tao BW, Tian Z et al (2006) Enhancement of flux pinning of TFA-MOD YBCO thin films by embedded nanoscale Y₂O₃. Supercon Sci Tech 19(8):844. https://doi.org/10.1088/0953-2048/19/8/027
16. Goyal A, Norton DP, Budai JD et al (1996) High critical current density superconducting tapes by epitaxial deposition of YBa₂Cu₃O_7-δ thick films on biaxially textured metals. Appl Phys Lett 69(12):1795-1797
17. Iijima Y, Tanabe N, Kohno O et al (1992) In-plane aligned YBa₂Cu₃O_7-δ thin films deposited on polycrystalline metallic substrates. Appl Phys Lett 60(6):769-771
18. Wu XD, Foltyn SR, Arendt PN et al (1995) Properties of YBa₂Cu₃O_7-δ thick films on flexible buffered metallic substrates. Appl Phys Lett 67(16):2397-2399
19. Yasuhirio I, Kazuomi, et al (2002) Temperature and RE elemental dependence for ZrO₂-RE₂O₃ oxide film growth by IBAD method. Physica C 378(2):960-964
20. Hühne R, Güth K, Gartner R et al (2010) Application of textured IBAD-TiN buffer layers in coated conductor architectures. Supercon Sci Tech 23(1):014010. https://doi.org/10.1088/0953-2048/23/1/014010
21. Kidszun M, Huhne R, Holzapfel B et al (2010) Ion-beam-assisted deposition of textured NbN thin films. Supercon Sci Tech 23(2):025010. https://doi.org/10.1088/0953-2048/23/2/025010
22. Iijima Y, Kakimoto K, Yamada Y et al (2004) Research and development of biaxially textured IBAD-GZO templates for coated superconductors. Mrs Bull 29(8):564-571
23. Usoskin A, Betz U, Dietrich R et al (2016) Long HTS coated conductors processed via large area PLD/ABAD deposition for high field applications. IEEE T Appl Supercon 26(3):6602304. https://doi.org/10.1109/TASC.2016.2542253
24. Prusseit W, Nemetschek R, Hoffmann C et al (2005) ISD process development for coated conductors. Physica C 426(2):866-871
25. Selvamanickam V, Chen Y, Xiong X et al (2008) Progress in second-generation HTS wire development and manufacturing. Physica C 468(15):1504-1509
26. Kakimoto K, Igarashi M, Hanada Y et al (2009) High-speed deposition of high-quality RE123 films by a PLD system with hot-wall heating. Supercon Sci Tech 23(1):014016. https://doi.org/10.1088/0953-2048/23/1/014016
27. Selvamanickam V, Xie Y, Reeves J et al (2004) MOCVD-based YBCO-coated conductors. Mrs Bull 29(8):579-582
28. Matias V, Hanisch J, Reagor D et al (2009) Reactive Co-evaporation of YBCO as a low-cost process for fabricating coated conductors. IEEE T Appl Supercon 19(3):3172-3175
29. Holesinger TG, Civale L, Maiorov B et al (2008) Progress in nanoengineered microstructures for tunable high-current, hightemperature superconducting wires. Adv Mater 20(3):391-407
30. Qi X, Macmanus-Driscoll JL (2001) Liquid phase epitaxy processing for high temperature superconductor tapes. Curr Opin Solid St M 5(4):291-300
31. Yoshizumi M, Nakanishi T, Matsuda J et al (2008) Crystal growth of YBCO coated conductors by TFA-MOD method. Physica C 468(15):1531-1533
32. Senatore C, Barth C, Bonura M et al (2016) Field and temperature scaling of the critical current density in commercial REBCO coated conductors. Supercon Sci Tech 29(1):014002. https://doi.org/10.1088/0953-2048/29/1/014002
33. Araki T, Hirabayashi I (2003) Review of a chemical approach to YBa₂Cu₃O_7-δ coated superconductors-metalorganic deposition using trifluoroacetates. Supercon Sci Tech 16(11):R71-R94
34. Obradors X, Puig T, Pomar A et al (2006) Progress towards allchemical superconducting YBa₂Cu₃O_7-δ-coated conductors. Supercon Sci Tech 19(3):S13-S26
35. Li M, Yang W, Shu G et al (2015) Controlled-growth of film using modified low-fluorine chemical solution deposition. IEEE T Appl Supercon 25(3):1-4
36. Gu Z, Cui C, Jie Y et al (2016) Direct observation of wrinkling and healing evolution for YBa₂Cu₃O_7-δ precursor films prepared by the metalorganic solution method. IEEE T Appl Supercon 26(8):1-7
37. Li M, Liu Z, Bai C et al (2017) Artificial control for nucleation and growth rate of YBa₂Cu₃O_7-δ coated conductors prepared by low fluorine chemical solution deposition. Physica C 537:29-33
38. Wimbush SS (2022) A high-temperature superconducting (HTS) wire critical current database. http://www.figureshare.org. Accessed 21 Feb 2022
39. Ito T, Ichino Y, Tsuchiya Y et al (2021) Enhancement of I-C of BaHfO₃ -doped REBCO thick coated conductor using vapor-liquid-solid growth technique. IEEE T Appl Supercon 31(5):6601304. https://doi.org/10.1109/TASC.2021.3072480
40. Ito T (2021) Enhancement of I_c of BaHfO₃-doped REBCO thick coated conductor using vapor-liquid-solid growth technique. IEEE T Appl Supercon 31(5):6601304. https://doi.org/10.1109/TASC.2021.3072480
41. Yasuda K, Ito T, Tsuchiya Y et al (2020) Fabrication of YBa₂Cu₃O_7-δ coated conductor by vapor-liquid-solid growth technique using a reel-to-reel system. J Phys Conf Ser JPCS 1590:012029. https://doi.org/10.1088/1742-6596/1590/1/012029
42. Ito T (2021) Effect of surface liquid layer during film growth on morphology of BaHfO₃2Cu₃O_7-δ coated conductors fabricated by pulsed laser deposition. IEEE T Appl Supercon 31(5):6601205. https://doi.org/10.1109/TASC.2021.3071143
43. Hopkins SC, Mitchell-Williams TB, Bussche DRV et al (2016) Low AC loss inkjet-printed multifilamentary YBCO coated conductors. IEEE T Appl Supercon 26(3):1-5
44. Driessche IV, Feys J, Hopkins SC et al (2012) Chemical solution deposition using ink-jet printing for YBCO coated conductors. Supercon Sci Tech 25(6):65017-65028
45. Vandaele K, Mosiadz M, Hopkins SC et al (2012) The influence of heat treatment parameters on pyrolysed TFA-derived YBCO films deposited by inkjet printing. Mater Res Bull 47(8):2032-2039
46. Soler L, Jareo J, Banchewski J et al (2020) Ultrafast transient liquid assisted growth of high current density superconducting films. Nat Commun 11(1):344. https://doi.org/10.1038/s41467-019-13791-1
47. Rasi S, Soler L, Jareo J et al (2020) Relevance of the formation of intermediate non-equilibrium phases in YBa₂Cu₃O_7-δ film growth by transient liquid assisted growth. J Phys Chem C 124(28):15574-15584
48. Feys J, Vermeir P, Lommens P et al (2012) Ink-jet printing of YBa₂Cu₃O_7-δ superconducting coatings and patterns from aqueous solutions. J Mater Chem 22(9):3717-3726
49. Obradors X, Puig T, Ricart S et al (2012) Growth, nanostructure and vortex pinning in superconducting YBa₂Cu₃O_7-δ thin films based on trifluoroacetate solutions. Supercon Sci Tech 25(12):123001. https://doi.org/10.1088/0953-2048/25/12/123001
50. Nakaoka K, Yoshida R, Kimura K et al (2017) Another approach for controlling size and distribution of nanoparticles in coated conductors fabricated by the TFA-MOD method. Supercon Sci Tech 30(5):055008. https://doi.org/10.1088/1361-6668/aa66e1
51. Wu JZ, Shi JJ (2017) Interactive modeling-synthesis-characterization approach towards controllable in situ self-assembly of artificial pinning centers in RE-123 films. Supercon Sci Tech 30(10):103002. https://doi.org/10.1088/1361-6668/aa8288
52. Kwok WK, Welp U, Glatz A et al (2016) Vortices in high-performance high-temperature superconductors. Rep Prog Phys 79(11):116501. https://doi.org/10.1088/0034-4885/79/11/116501
53. Chen J, Huang RT, Shen JJ et al (2021) Significant improvement of the critical current of mod-derived YBa₂Cu₃O_7-δ-coated conductors by post-annealing treatment. Appl Phys Express 14(5):055506. https://doi.org/10.35848/1882-0786/abf4f0
54. Jiang P, Zhang S, Fan Z et al (2017) Development of multipass MOCVD process for fabricating (Gd, Y)Ba₂Cu₃O_7-δ coated conductors. IEEE T Appl Supercon 27(4):6600405. https://doi.org/10.1109/TASC.2016.2625759
55. Iijima Y, Adachi Y, Fujita S et al (2015) Development for mass production of homogeneous RE123 coated conductors by hot-wall PLD process on IBAD template technique. IEEE T Appl Supercon 25(3):6604104. https://doi.org/10.1109/TASC.2014.2379923
56. Lee JH, Lee H, Lee JW et al (2014) RCE-DR, a novel process for coated conductor fabrication with high performance. Supercon Sci Tech 27(4):044018. https://doi.org/10.1088/0953-2048/27/4/044018
57. Fan Z, Qi Y, Gu H et al (2015) Optimum composition in 10% Zr-added GdYBCO coated conductor for enhanced flux pinning at 30 K. IEEE T Appl Supercon 25(3):6601905c. https://doi.org/10.1109/TASC.2014.2371538
58. Chen Y, Selvamanickam V, Zhang Y et al (2009) Enhanced flux pinning by BaZrO₃ and (Gd,Y)₂O₃ nanostructures in metal organic chemical vapor deposited GdYBCO high temperature superconductor tapes. Appl Phys Lett 94(6):062513. https://doi.org/10.1063/1.3082037
59. Zhang Y, Lehner T, Fukushima T et al (2013) Progress in production and performance of second generation (2G) HTS wire for practical applications. In: IEEE international conference on applied superconductivity and electromagnetic devices (ASEMD), Beijing, China
60. Chen Y, Shi T, Guevara AP et al (2011) Composition effects on the critical current of MOCVD-processed Zr:GdYBCO coated conductors in an applied magnetic field. IEEE T Appl Supercon 21(3):3166-3170
61. Selvamanickam V, Chen Y, Shi T et al (2013) Enhanced critical currents in (Gd, Y)Ba₂Cu₃O_7-δ superconducting tapes with high levels of Zr addition. Supercon Sci Tech 26(3):035006. https://doi.org/10.1088/0953-2048/26/3/035006
62. Xu A, Khatri N, Liu Y et al (2015) Broad temperature pinning study of 15 mol.% Zr-added (Gd, Y)-Ba-Cu-O MOCVD coated conductors. IEEE T Appl Supercon 25(3):6603105. https://doi.org/10.1109/TASC.2014.2375231
63. Llordes A, Palau A, Gazquez J et al (2012) Nanoscale straininduced pair suppression as a vortex-pinning mechanism in hightemperature superconductors. Nat Mater 11(4):329-336
64. Coll M, Guzman R, Garces P et al (2014) Size-controlled spontaneously segregated Ba₂YTaO₆ nanoparticles in YBa₂Cu₃O_7-δ nanocomposites obtained by chemical solution deposition. Supercon Sci Tech 27(4):044008. https://doi.org/10.1088/0953-2048/27/4/044008
65. Miura M, Maiorov B, Willis JO et al (2013) The effects of density and size of BaMO₃ (M = Zr, Nb, Sn) nanoparticles on the vortex glassy and liquid phase in (Y, Gd)Ba₂Cu₃O_7-δ coated conductors. Supercon Sci Tech 26(3):035008. https://doi.org/10.1088/0953-2048/26/3/035008
66. Gutierrez J, Llordes A, Gazquez J et al (2007) Strong isotropic flux pinning in solution-derived YBa₂Cu₃O_7-δ nanocomposite superconductor films. Nat Mater 6(5):367-373
67. Engel S, Thersleff T, Huehne R et al (2007) Enhanced flux pinning in YBa₂Cu₃O_7-δ layers by the formation of nanosized BaHfO₃ precipitates using the chemical deposition method. Appl Phys Lett 90(10):102505. https://doi.org/10.1063/1.2711761
68. Erbe M, Haenisch J, Huehne R et al (2015) BaHfO₃69. Ye S, Suo H, Wu Z et al (2011) Preparation of solution-based YBCO films with BaSnO₃ particles. Physica C 471(7/8):265-269
70. Ding FZ, Gu HW, Zhang T et al (2013) Strong flux pinning enhancement in YBa₂Cu₃O_7-δ films by embedded BaZrO₃ and BaTiO₃ nanoparticles. Chin Phys B 22(7):077401. https://doi.org/10.1088/1674-1056/22/7/077401
71. Guzman R, Gazquez J, Mundet B et al (2017) Probing localized strain in solution-derived YBa₂Cu₃O_7-δ nanocomposite thin films. Phys Rev Mater 1(2):024801. https://doi.org/10.1103/PhysRevMaterials.1.024801
72. Rouco V, Palau A, Guzman R et al (2014) Role of twin boundaries on vortex pinning of CSD YBCO nanocomposites. Supercon Sci Tech 27(12):125009. https://doi.org/10.1088/0953-2048/27/12/125009
73. Chen J, Huang R, Zhou D et al (2022) Improvement of epitaxial growth and flux pinning of MOD-derived YBa₂Cu₃O_7-δ nanocomposites films by self-seeding and multi-element doping strategies. J Eur Ceram Soc 42(14):6542-6550
74. Obradors X, Puig T, Li Z et al (2018) Epitaxial YBa₂Cu₃O_7-δ nanocomposite films and coated conductors from BaMO₃75. Li Z, Coll M, Mundet B et al (2019) Control of nanostructure and pinning properties in solution deposited YBa₂Cu₃O_7-δ nanocomposites with preformed perovskite nanoparticles. Sci Rep 9:5828. https://doi.org/10.1038/s41598-019-42291-x
76. Díez-Sierra J, Lopez-Dominguez P, Rijckaert H et al (2020) High critical current density and enhanced pinning in superconducting films of YBa₂Cu₃O_7-δ nanocomposites with embedded BaZrO₃₃, BaTiO₃₃77. Matsui H, Ootsuka T, Ogiso H et al (2015) Enhancement of critical current density in YBa₂Cu₃O_7-δ films using a semiconductor ion implanter. J Appl Phys 117(4):043911. https://doi.org/10.1063/1.4906782
78. Sueyoshi T, Sogo T, Nishimura T et al (2016) Angular behaviour of critical current density in YBa₂Cu₃O_7-δ thin films with crossed columnar defects. Supercon Sci Tech 29(6):065023. https://doi.org/10.1088/0953-2048/29/6/065023
79. Nakashima K, Chikumoto N, Ibi A et al (2007) Effect of ionirradiation and annealing on superconductive property of PLD prepared YBCO tapes. Physica C 463:665-668
80. Matsui H, Ootsuka T, Ogiso H et al (2016) Origin of the dimpled critical-current versus magnetic-field-angle relation in YBa₂Cu₃O_7-δ films studied using sub-MeV ion irradiation. Supercon Sci Tech 29(6):065002. https://doi.org/10.1088/0953-2048/29/6/065002
81. Gu Y, Cai CB, Liu ZY et al (2021) Effect of Ta irradiation on microstructure and current carrying properties of YBCO coated conductors with element doping. J Appl Phys 130(8):0053158. https://doi.org/10.1063/5.0053158
82. Bergen A, Andersen R, Bauer M et al (2019) Design and in-field testing of the world’s first ReBCO rotor for a 3.6 MW wind generator. Supercon Sci Tech 32(12):125006. https://doi.org/10.1088/1361-6668/ab48d6
83. Wikus P, Frantz W, Kummerle R et al (2022) Commercial gigahertz-class NMR magnets. Supercon Sci Tech 35(3):033001. https://doi.org/10.1088/1361-6668/ac4951

Development of metal-organic deposition-derived second-generation high-temperature superconductor tapes and artificial flux pinning

Development of metal-organic deposition-derived second-generation high-temperature superconductor tapes and artificial flux pinning

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价