Surface roughness measurement and analysis of mechanical parts based on digital holography

doi:10.1007/s40436-016-0146-5

Advances in Manufacturing ›› 2016, Vol. 4 ›› Issue (3): 217-224.doi: 10.1007/s40436-016-0146-5

Previous Articles Next Articles

Surface roughness measurement and analysis of mechanical parts based on digital holography

Wen-jing Zhou, Ke-qin Peng, Ying-jie Yu

Department of Precision Mechanical Engineering, Shanghai University, Shanghai 200072, P. R. China

Received:2015-12-21 Revised:2016-07-01 Online:2016-09-25 Published:2016-09-25

Abstract

Abstract:

We measure the surface roughness of the mechanical parts based on digital holography. A digital offaxis hologram recording setup for reflective samples is built. Firstly, the height reconstruction error 2.3% of the setup is calibrated by using the quartz step height standard (VLSISHS-880QC). Then, the standard scribed-line model and the grinding roughness specimen are selected as the test samples and their surface roughness are 0.095 6 μm and 0.025 3 μm, with errors 6.3%, 0.9%, respectively. The results are in good agreement with the given roughness parameters. At last, we also analyze the window effect of the filter on the roughness measurement value based on digital holography. In conclusion, the paper demonstrated effectively that the digital holography could provide the surface feature for the roughness measurement with high accuracy.

Key words: Digital holography, Digital off-axis hologram, Roughness measurement, Frequency filter window

Wen-jing Zhou, Ke-qin Peng, Ying-jie Yu. Surface roughness measurement and analysis of mechanical parts based on digital holography[J]. Advances in Manufacturing, 2016, 4(3): 217-224.

TrendMD

References

1. Ling LX, Pei FC, Ying W et al (2012) Three-dimensional measuring technique for surface topography using a light-sectioning microscope. Appl Opt 8:1162-1170
2. Jian CW (2008) Summary of surface toughness measurement technology. High Vocat Educ 5:76-78
3. Xiao MX, Hong H (2009) Development of non-contact surface roughness measurement in last decade. IEEE Int Conf Meas Technol Mechatron Autom 584:210-213
4. Chun XL, Qing RD, Hai XL (2010) Measurement of surface parameters from autocorrelation function of speckles in deep Fresnel region with microscopic imaging system. Opt Exp 2:1302-1312
5. Yatafai T, Chiang FP (1982) Automatic fringe analysis for moiré topography. Opt Laser Eng 3:73-83
6. Takeda M, Mutoh K (1986) Fourier transform profilometry of 3D diffuse objects by spatial phase detection. Appl Opt 16:30-35
7. Windecker R, Tiziani HJ (1995) Tonometry of technical and biological objects by fringe projection. Appl Opt 36:44-50
8. Windecker P, Franz S, Tiziani HJ (1999) Optical roughness measurement with fringe projection. Appl Opt 28:37-42
9. Dai YZ, Chiang FP (2000) Contouring by moiré interferometry. Exp Mech 31:76-81
10. Zhang H, Wu F (2000) Spatiotemporal phase unwrapping and its application in fringe projection fiber optics phase-shifting profilometry. Opt Eng 19:58-64
11. Manojlovic LM, Zivanov MB, Marincic AS (2010) White-light interferometry sensor for rough surface height distribution measurement. IEEE Sens J 6:1125-1132
12. Metchkarov N (2000) High-accuracy surface measurement using laser-diode phase-stepping interferometry. Vacuum 58:464-469
13. Michael Z (2002) High speed surface measurement with lateral scanning-white light interferometry. Veeco Instruments Inc., Town of Oyster Bay
14. Dirksen D, Droste H, Kemper B (2001) Lensless Fourier holography for digital holographic interferometry on biological samples. Opt Laser Eng 2:1-9
15. Tankam P, Picart P (2012) Use of digital color holography for crack investigation in electronic components. Opt Laser Eng 49:1335-1342
16. Mosarraf H, Chandra S (2009) Temperature measurement in laminar free convective flow using digital holography. Appl Opt 10:1869-1877
17. Weidong Y, Alexander BK, Raymond AS (2006) Phase signature for particle detection with digital in-line holography. Opt Lett 10:1309-1401
18. Taslima K, Mohammad NR, Arvind R (2011) Accurate size measurement of needle-shaped particles using digital holography. Chem Eng Sci 12:2699-2706
19. Majinyang S, Constance KTT, Ruojin D (2010) Thickness and roughness measurement using a reflective digital holographic microscope. Proc SPIE 7522:7522671-9
20. Lei X, Peng XY, Jian NM et al (2001) Studies of digital microscopic holography with application to microstructure testing. Appl Opt 28:5046-5051
21. Li HM, Hui W, Yong L et al (2004) Numerical reconstruction of digital hologram for three-dimensional shape measurement. Appl Opt 6:396-400
22. Schnars U, Juptner W (2002) Digital recording and numerical reconstruction of holograms. Meas Sci Technol 13:R85-R101
23. Guang JW (2011) Study on digital holography and its applications in the field of measurement. Dissertation, Beijing University of Technology

Surface roughness measurement and analysis of mechanical parts based on digital holography

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 0

Recommended Articles

Metrics

Comments