An approach to net-centric control automation of technological processes within industrial IoT systems

doi:10.1007/s40436-017-0195-4

Advances in Manufacturing ›› 2017, Vol. 5 ›› Issue (4): 388-393.doi: 10.1007/s40436-017-0195-4

• Articles • Previous Articles Next Articles

An approach to net-centric control automation of technological processes within industrial IoT systems

Nikita Voinov, Igor Chernorutsky, Pavel Drobintsev, Vsevolod Kotlyarov

Institute of Computer Science and Technology, Peter the Great St. Petersburg Polytechnic University, Polytechnicheskaya 29, Saint Petersburg, Russia 195251

Received:2017-02-28 Revised:2017-11-06 Online:2017-12-25 Published:2017-12-25
Contact: Nikita Voinov,E-mail:voinov@ics2.ecd.spbstu.ru E-mail:voinov@ics2.ecd.spbstu.ru
Supported by:
This work was financially supported by the Ministry of Education and Science of the Russian Federation,within the framework of the Federal Targeted Programme for Research and Development in Priority Areas of Advancement of the Russian Scientific and Technological Complex for 2014-2020(Grant No. 14.578.21.0211,ID RFMEFI57816X0211).

Abstract

Abstract:

The use of industrial internet networks with netcentric control is the driving trend behind the future material manufacturing of goods and services. The promising future of this approach is provided by these complex net-centric systems functioning with high reliability. The problem of intelligent net-centric control and reliable network functioning is fundamental, with the additional requirement that the system should preserve stakeholder security and privacy according to policies. The issue is that such systems are characterized by complex multi-parameter operability modes controlled by various criteria. This study considers an approach to providing reliable management of complicated Internet of things (IoT) systems. This is achieved by solving multi-criteria tasks over many processes of various physical natures. Corresponding methods of hierarchical decomposition of multi-criteria tasks, process levels of multi-criteria optimization, specifics of aggregation levels, and the master equation of the optimization process are described.

The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-017-0195-4/fulltext.html

Key words: Net-centric control, Technological process, Internet of things (IoT), Reliability, Multi-criteria optimization

Nikita Voinov, Igor Chernorutsky, Pavel Drobintsev, Vsevolod Kotlyarov. An approach to net-centric control automation of technological processes within industrial IoT systems[J]. Advances in Manufacturing, 2017, 5(4): 388-393.

TrendMD

References

1. Abdulbarieva EI (2014) High-tech computer engineering:a review of markets and technologies. Publishing House of the Polytechnic, University Press, St. Petersburg
2. FCS network. http://www.globalsecurity.org/military/systems/ground/fcs-network.htm. Accessed 27 Mar 2017
3. Java reflection API. https://docs.oracle.com/javase/tutorial/reflect. Accessed 27 Mar 2017
4. Arbabi H, Weigle MC (2010) Highway mobility and vehicular ad-hoc networks in ns-3. In:proceedings of the simulation conference (WSC), pp 2991-3003
5. Banerjee SK, Rajamani K (1973) Optimization of system reliability using a parametric approach. IEEE Trans Reliabil 22(1):35-39
6. Birrel AD, Nelson BJ (1984) Implementing remote procedure calls. ACM Trans Comput Syst 2(1):39-59
7. Chernorutskiy IG (2004) Optimization tools in control theory. Piter, St. Petersburg
8. Chernorutskiy IG (2005) Decision making tools. BHV, St. Petersburg
9. Chernorutskiy IG (2011) Optimization tools. Computer Technologies, BHV, St. Petersburg
10. Francis PL (2004) The army's future combat systems' features, risks, and alternatives. http://www.gao.gov/new.items/d04635t. pdf. Accessed 28 Feb 2017
11. Gallo G, Sandy C (1980) An algorithm for the min concave cost flow problem. Eur J Oper Res 4(4):248-255
12. Golden BL, Bodin LD, Doyle T et al (1980) Approximate traveling salesman problem. Oper Res 28(3):694-711
13. Internet of things. http://iotconf.ru/ru/news/chto-2015-god-dalsovremennoy-industrii-visokih-tehnologiy#sthash.G2GWCS1w. dpbs. Accessed 27 March 2017
14. Letichevsky A, Kapitonova J, Letichevsky A et al (2005) Basic protocols, message sequence charts, and the verification of requirements specifications. Comput Networks 49(5):661-675
15. Misra KB (1972) Reliability optimization of a series-parallel system. IEEE Trans Reliabil 21(4):230-238
16. Saaty TL (1980) The analytic hierarchy process:planning, priority setting, resource allocation. McGraw-Hill, New York
17. Saaty TL (2008) Decision making with the analytic hierarchy process. Int J Services Sci 1(1):83-98
18. Sharma J, Venkateswaran KV (1971) A direct method for maximizing the system reliability. IEEE Trans Reliabil 20(4):256-258
19. Shopin AG, Zanin IV, Burdin AV (2009) MIS and EMI:information systems of MES level. Autom Ind 2009:28-34
20. Shore ML, Foulds LR, Gibbons PB (1982) An algorithm for the Steiner problem in graphs. Networks 12(3):323-333
21. Viazgin VA, Fedorov VV (1989) Mathematical methods of the automated designing. Higher school, Moscow
22. ITU Recommendation Z.120. Message Sequence Charts (MSC), 11/99
23. ITU Recommendation Z.151. User Requirements Notation (URN)-Language definition, 10/12
24. Yang Y, Wing O (1972) Suboptimal algorithm for a wire routing problem. IEEE Trans Circuit Theory 19(5):508-510
25. Yuan J (2015) Uncertainty measurement and prediction of IoT data based on Gaussian process modeling. Nongye Jixie Xuebao 46(5):265-272

[1]	Xi-Nong En, Yi-Min Zhang, Xian-Zhen Huang. Time-variant reliability analysis of a continuous system with strength deterioration based on subset simulation [J]. Advances in Manufacturing, 2019, 7(2): 188-198.
[2]	Ling Wang, Lu An, Hao-Qi Ni, Wei Ye, Panos M. Pardalos, Min-Rui Fei. Pareto-based multi-objective node placement of industrial wireless sensor networks using binary differential evolution harmony search [J]. Advances in Manufacturing, 2016, 4(1): 66-78.
[3]	H. Xu T. Suni V. Vuorinen J. Li H. Heikkinen P. Monnoyer M. Paulasto-Kro¨ ckel. Wafer-level SLID bonding for MEMS encapsulation [J]. Advances in Manufacturing, 2013, 1(3): 226-235.

An approach to net-centric control automation of technological processes within industrial IoT systems

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 3

Recommended Articles

Metrics

Comments