Grinding mechanics of ceramics: from mechanism to modeling

doi:10.1007/s40436-025-00553-0

Abstract

Abstract: High-temperature-resistant and chemically stable ceramic materials exhibit great adaptability across numerous industrial applications. Grinding is an essential component of the precision shaping and manufacturing processes for ceramic structural components. However, the low machining efficiency and high machining damage rate caused by hard and brittle material properties have been a challenge in both academia and industry. Grinding force is the most critical parameter reflecting the grinding system, and establishing an accurate prediction model is highly significant in reducing machining damage. However, a knowledge gap remains in the comprehensive review and evaluation of grinding force models for ceramic materials, which is undoubtedly not conducive to further theoretical advances. This review discusses the removal mechanism for polycrystalline ceramic materials. Subsequently, it comprehensively reviews and comparatively evaluates detailed grinding force modeling knowledge. Furthermore, it explores the specificities of the ultrasonic and laser energy-field-assisted grinding of ceramic materials in terms of their physical behavior and mechanical modeling. Finally, the theoretical value of grinding force modeling for predicting the damage to ceramic materials is explored. The current limitations of the grinding process, mechanical modeling of ceramic materials, corresponding potential research directions, and valuable research content are provided. The goal is to derive actionable low-damage grinding guidelines and establish a robust theoretical framework that enhances the quality of grinding processes for ceramics and other hard and brittle solids.

The full text can be downloaded at https://doi.org/10.1007/s40436-025-00553-0

Key words: Ceramics grinding, Force model, Material removal mechanisms, Hard and brittle materials

Wen-Hao Xu, Chang-He Li, Pei-Ming Xu, Wei Wang, Yan-Bin Zhang, Min Yang, Xin Cui, Ben-Kai Li, Ming-Zheng Liu, Teng Gao, Yusuf Suleiman Dambatta, Ai-Guo Qin. Grinding mechanics of ceramics: from mechanism to modeling[J]. Advances in Manufacturing, 2026, 14(1): 4-42.

TrendMD

References

[1] Du JG, Su JZ, Geng JX et al (2023) Research advances on primary machining technologies of zirconia ceramics. Int J Adv Manuf Technol 130:23-55
[2] Ming WY, Jia HJ, Zhang HM et al (2020) A comprehensive review of electric discharge machining of advanced ceramics. Ceram Int 46:21813-21838
[3] Liang XL, Liu ZQ, Wang B (2019) State-of-the-art of surface integrity induced by tool wear effects in machining process of titanium and nickel alloys: a review. Measurement 132:150-181
[4] Sirin S, Sarikaya M, Yildirim CV et al (2021) Machinability performance of nickel alloy X-750 with SiAlON ceramic cutting tool under dry, MQL and hBN mixed nanofluid-MQL. Tribol Int 153:106673. https://doi.org/10.1016/j.triboint.2020.106673
[5] Zhang XQ, Zhang KQ, Zhang L et al (2022) Additive manufacturing of cellular ceramic structures: from structure to structure-function integration. Mater Des 215:110470. https://doi.org/10.1016/j.matdes.2022.110470
[6] Timurkutluk C, Toruntay F, Onbilgin S et al (2022) Development of ceramic fiber reinforced glass ceramic sealants for microtubular solid oxide fuel cells. Ceram Int 48:15703-15710
[7] Pachaury Y, Tandon P (2017) An overview of electric discharge machining of ceramics and ceramic based composites. J Manuf Process 25:369-390
[8] Cui X, Li CH, Yang M et al (2023) Enhanced grindability and mechanism in the magnetic traction nanolubricant grinding of Ti-6Al-4V. Tribol Int 186:108603. https://doi.org/10.1016/j.triboint.2023.108603
[9] Zhu DH, Feng XZ, Xu XH et al (2020) Robotic grinding of complex components: a step towards efficient and intelligent machining—challenges, solutions, and applications. Robot Comput-Integr Manuf 65:101908. https://doi.org/10.1016/j.rcim.2019.101908
[10] Zhang YB, Li CH, Jia DZ et al (2015) Experimental evaluation of the lubrication performance of MoS₂/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding. Int J Mach Tools Manuf 99:19-33
[11] Zhang YB, Li CH, Yang M et al (2016) Experimental evaluation of cooling performance by friction coefficient and specific friction energy in nanofluid minimum quantity lubrication grinding with different types of vegetable oil. J Clean Prod 139:685-705
[12] Shen JY, Wang JQ, Jiang B et al (2015) Study on wear of diamond wheel in ultrasonic vibration-assisted grinding ceramic. Wear 332:788-793
[13] Xu S, Yao ZQ, He JW et al (2018) Grinding characteristics, material removal, and damage formation mechanisms of zirconia ceramics in hybrid laser/grinding. J Manuf Sci Eng-Trans ASME 140:071010. https://doi.org/10.1115/1.4039645
[14] Guo Y, Liu MH, Li CL (2020) Modeling and experimental investigation on grinding force for advanced ceramics with different removal modes. Int J Adv Manuf Technol 106:5483-5495
[15] Kar S, Kumar S, Bandyopadhyay PP et al (2020) Grinding of hard and brittle ceramic coatings: force analysis. J Eur Ceram Soc 40:1453-1461
[16] Pang JZ, Ji X, Niu Y et al (2022) Experimental investigation of grinding force and material removal mechanism of laser-structured zirconia ceramics. Micromachines 13:710. https://doi.org/10.3390/mi13050710
[17] Dambatta YS, Sayuti M, Sarhan AAD et al (2018) Comparative study on the performance of the MQL nanolubricant and conventional flood lubrication techniques during grinding of Si₃N₄ ceramic. Int J Adv Manuf Technol 96:3959-3976
[18] Dambatta YS, Sayuti M, Sarhan AAD et al (2019) Tribological performance of SiO₂-based nanofluids in minimum quantity lubrication grinding of Si₃N₄ ceramic. J Manuf Process 41:135-147
[19] Gaitonde VN, Karnik SR, Figueira L et al (2011) Performance comparison of conventional and wiper ceramic inserts in hard turning through artificial neural network modeling. Int J Adv Manuf Technol 52:101-114
[20] Lipinski D, Balasz B, Rypina L (2018) Modelling of surface roughness and grinding forces using artificial neural networks with assessment of the ability to data generalisation. Int J Adv Manuf Technol 94:1335-1347
[21] Gu P, Zhu CM, Tao Z et al (2020) A grinding force prediction model for SiCp/Al composite based on single-abrasive-grain grinding. Int J Adv Manuf Technol 109:1563-1581
[22] Zhang MH, Shan CW, Xia ZW et al (2024) Dynamic mechanical model in grinding C/SiC composites. Int J Mech Sci 268:109042. https://doi.org/10.1016/j.ijmecsci.2024.109042
[23] Zhou M, Zheng W (2016) A model for grinding forces prediction in ultrasonic vibration assisted grinding of SiCp/Al composites. Int J Adv Manuf Technol 87:3211-3224
[24] Feng J, Chen P, Ni J (2013) Prediction of grinding force in microgrinding of ceramic materials by cohesive zone-based finite element method. Int J Adv Manuf Technol 68:1039-1053
[25] Zhang XL, Chen P, Zhang J et al (2021) Study on grinding force of Si₃N₄ ceramics in random rotation grinding with truncated polyhedral grains. Int J Adv Manuf Technol 115:3139-3148
[26] Fu YC, Tian L, Xu JH et al (2015) Development and application on the grinding process modeling and simulation. J Mech Eng 51:197-205
[27] Li C, Hu YX, Zhang FH et al (2023) Molecular dynamics simulation of laser assisted grinding of GaN crystals. Int J Mech Sci 239:107856. https://doi.org/10.1016/j.ijmecsci.2022.107856
[28] Lin JM, Jiang F, Xu XP et al (2021) Molecular dynamics simulation of nanoindentation on c-plane sapphire. Mech Mater 154:103716. https://doi.org/10.1016/j.mechmat.2020.103716
[29] Bie WB, Zhao B, Gao GF et al (2023) Grinding force assessment in tangential ultrasonic vibration-assisted grinding gear: analytical model and experimental verification. Int J Adv Manuf Technol 126:5457-5474
[30] Gao BH, Jin T, Qu MA et al (2024) Force modeling of vertical surface grinding considering wheel-workpiece contact geometry. Int J Mech Sci 269:108999. https://doi.org/10.1016/j.ijmecsci.2024.108999
[31] Dai CW, Yin Z, Ding WF et al (2019) Grinding force and energy modeling of textured monolayer CBN wheels considering undeformed chip thickness nonuniformity. Int J Mech Sci 157:221-230
[32] Lu SX, Gao H, Bao YJ et al (2019) A model for force prediction in grinding holes of SiCp/Al composites. Int J Mech Sci 160:1-14
[33] Zhang WJ, Gong YD, Zhao XL et al (2023) Modeling and analysis of tangential force in robot abrasive belt grinding of nickel-based superalloy. Arch Civ Mech Eng 23:124. https://doi.org/10.1007/s43452-023-00646-2
[34] Agarwal S, Rao PV (2012) Predictive modeling of undeformed chip thickness in ceramic grinding. Int J Mach Tools Manuf 56:59-68
[35] Agarwal S, Rao PV (2013) Predictive modeling of force and power based on a new analytical undeformed chip thickness model in ceramic grinding. Int J Mach Tools Manuf 65:68-78
[36] Li HN, Yu TB, Wang ZX et al (2017) Detailed modeling of cutting forces in grinding process considering variable stages of grain-workpiece micro interactions. Int J Mech Sci 126:319-339
[37] Guo XG, Li Q, Liu T et al (2017) Advances in molecular dynamics simulation of ultra-precision machining of hard and brittle materials. Front Mech Eng 12:89-98
[38] Zhang T, Jiang F, Huang H et al (2021) Towards understanding the brittle-ductile transition in the extreme manufacturing. Int J Extreme Manuf 3:022001. https://doi.org/10.1088/2631-7990/abdfd7
[39] Qian HA, Chen MK, Qi ZJ et al (2023) Review on research and development of abrasive scratching of hard brittle materials and its underlying mechanisms. Crystals 13:428. https://doi.org/10.3390/cryst13030428
[40] Bifano TG, Dow TA, Scattergood RO (1991) Ductile-regime grinding: a new technology for machining brittle materials. J Eng Ind 113:184-189
[41] Lu SX, Yang XX, Zhang JQ et al (2022) Rational discussion on material removal mechanisms and machining damage of hard and brittle materials. J Mech Eng 58:31-45
[42] Wang JJ, Zhang JF, Feng PF et al (2018) Damage formation and suppression in rotary ultrasonic machining of hard and brittle materials: a critical review. Ceram Int 44:1227-1239
[43] You KY, Yan GP, Luo XC et al (2020) Advances in laser assisted machining of hard and brittle materials. J Manuf Process 58:677-692
[44] Zhou HL, Zhang JF, Yu DW et al (2019) Advances in rotary ultrasonic machining system for hard and brittle materials. Adv Mech Eng 11:1687814019895929. https://doi.org/10.1177/1687814019895929
[45] T?nshoff H, Peters J, Inasaki I et al (1992) Modelling and simulation of grinding processes. CIRP Ann 41:677-688
[46] Meng QY, Guo B, Zhao QL et al (2023) Modelling of grinding mechanics: a review. Chin J Aeronaut 36:25-39
[47] Zhang B, Lu SX, Rabiey M et al (2023) Grinding of composite materials. CIRP Ann-Manuf Technol 72:645-671
[48] An QL, Chen J, Ming WW et al (2021) Machining of SiC ceramic matrix composites: a review. Chin J Aeronaut 34:540-567
[49] Diaz OG, Luna GG, Liao ZR et al (2019) The new challenges of machining ceramic matrix composites (CMCs): review of surface integrity. Int J Mach Tools Manuf 139:24-36
[50] Gao T, Zhang YB, Li CH et al (2022) Fiber-reinforced composites in milling and grinding: machining bottlenecks and advanced strategies. Front Mech Eng 17:24. https://doi.org/10.1007/s11465-022-0680-8
[51] Ding WF, Linke B, Zhu YJ et al (2017) Review on monolayer CBN superabrasive wheels for grinding metallic materials. Chin J Aeronaut 30:109-134
[52] Ding WF, Zhang LC, Li Z et al (2017) Review on grinding-induced residual stresses in metallic materials. Int J Adv Manuf Technol 88:2939-2968
[53] Dogra M, Sharma VS, Dureja JS et al (2018) Environment-friendly technological advancements to enhance the sustainability in surface grinding-a review. J Clean Prod 197:218-231
[54] Xu WH, Li CH, Zhang YB et al (2022) Electrostatic atomization minimum quantity lubrication machining: from mechanism to application. Int J Extreme Manuf 4:042003. https://doi.org/10.1088/2631-7990/ac9652
[55] Yang ZC, Zhu LD, Zhang GX et al (2020) Review of ultrasonic vibration-assisted machining in advanced materials. Int J Mach Tools Manuf 156:34. https://doi.org/10.1016/j.ijmachtools.2020.103594
[56] Zhang YB, Li HN, Li CH et al (2022) Nano-enhanced biolubricant in sustainable manufacturing: from processability to mechanisms. Friction 10:803-841
[57] Zhou K, Xiao GJ, Huang Y (2024) Understanding machinability improvements and removal mechanism of ceramic matrix composites during laser-ablating assisted grinding. Wear 538:23. https://doi.org/10.1016/j.wear.2023.205199
[58] Xiao GJ, Yang ZY, Zhou K et al (2024) Significant improvement of machinability of C_f/SiC composites through matching laser scanning spacing and abrasive belt grain size. Chin J Aeronaut 38:103017. https://doi.org/10.1016/j.cja.2024.04.003
[59] Yang M, Li CH, Zhang YB et al (2019) Effect of friction coefficient on chip thickness models in ductile-regime grinding of zirconia ceramics. Int J Adv Manuf Technol 102:2617-2632
[60] Yin JF, Xu JH, Ding WF et al (2021) Effects of grinding speed on the material removal mechanism in single grain grinding of SiC_f/SiC ceramic matrix composite. Ceram Int 47:12795. https://doi.org/10.1016/j.ceramint.2021.01.140
[61] Su YH, Lin B, Cao ZC (2018) Prediction and verification analysis of grinding force in the single grain grinding process of fused silica glass. Int J Adv Manuf Technol 96:597-606
[62] Denkena B, Bouabid A, Kroedel A (2020) Single grain grinding: a novel approach to model the interactions at the grain/bond interface during grinding. Int J Adv Manuf Technol 107:4811-4822
[63] Sun YL, Zuo DW, Wang HY et al (2011) Mechanism of brittle-ductile transition of a glass-ceramic rigid substrate. Int J Miner Metall Mater 18:229-233
[64] Huang H, Li XL, Mu DK et al (2021) Science and art of ductile grinding of brittle solids. Int J Mach Tools Manuf 161:103675. https://doi.org/10.1016/j.ijmachtools.2020.103675
[65] Yang X, Qiu ZJ, Wang YG (2019) Stress interaction and crack propagation behavior of glass ceramics under multi-scratches. J Non-Cryst Solids 523:119600. https://doi.org/10.1016/j.jnoncrysol.2019.119600
[66] Yang X, Qiu ZJ, Li X (2019) Investigation of scratching sequence influence on material removal mechanism of glass-ceramics by the multiple scratch tests. Ceram Int 45:861-873
[67] Qiu ZJ, Liu CC, Wang HR et al (2016) Crack propagation and the material removal mechanism of glass-ceramics by the scratch test. J Mech Behav Biomed Mater 64:75-85
[68] Cai LQ, Guo XG, Gao S et al (2019) Material removal mechanism and deformation characteristics of AIN ceramics under nanoscratching. Ceram Int 45:20545-20554
[69] Qiu ZJ, Wang YG (2021) Multi-tip indenter tool scratch behavior of glass-ceramics. J Mech Behav Biomed Mater 121:104617. https://doi.org/10.1016/j.jmbbm.2021.104617
[70] Dai JB, Su HH, Wang ZB et al (2021) Damage formation mechanisms of sintered silicon carbide during single-diamond grinding. Ceram Int 47:28419-28428
[71] Yan JW, Zhang ZY, Kuriyagawa T (2009) Mechanism for material removal in diamond turning of reaction-bonded silicon carbide. Int J Mach Tools Manuf 49:366-374
[72] Wirtz C, Mueller S, Mattfeld P et al (2017) A discussion on material removal mechanisms in grinding of cemented carbides. J Manuf Sci Eng-Trans ASME 139:121002. https://doi.org/10.1115/1.4036995
[73] Liu YY, Deng JX, Yue HZ et al (2019) Material removal behavior in processing green Al₂O₃ ceramics based on scratch and edge-indentation tests. Ceram Int 45:12495-12508
[74] Yin H, Wang S, Guo B et al (2022) Effects of scratch depth on material-removal mechanism of yttrium aluminium garnet ceramic. Ceram Int 48:27479-27485
[75] Zhao L, Hu WJ, Zhang Q et al (2021) Atomistic origin of brittle-to-ductile transition behavior of polycrystalline 3C-SiC in diamond cutting. Ceram Int 47:23895-23904
[76] Agarwal S, Rao PV (2008) Experimental investigation of surface/subsurface damage formation and material removal mechanisms in SiC grinding. Int J Mach Tools Manuf 48:698-710
[77] Li ZP, Zhang FH, Zhang Y et al (2017) Experimental investigation on the surface and subsurface damages characteristics and formation mechanisms in ultra-precision grinding of SiC. Int J Adv Manuf Technol 92:2677-2688
[78] Agarwal S, Rao PV (2010) Grinding characteristics, material removal and damage formation mechanisms in high removal rate grinding of silicon carbide. Int J Mach Tools Manuf 50:1077-1087
[79] Dai JB, Su HH, Wang ZB et al (2022) Research on the crack damage formation mechanisms of polycrystalline silicon carbide ceramics in grinding process. J Mech Eng 58:307-320
[80] Liu W, Tang DB, Gu H et al (2022) Experimental study on the mechanism of strain rate on grinding damage of zirconia ceramics. Ceram Int 48:21648-21655
[81] Dai JB, Su HH, Zhou WB et al (2018) Finite element implementation of the tension-shear coupled fracture criterion for numerical simulations of brittle-ductile transition in silicon carbide ceramic grinding. Int J Mech Sci 146:211-220
[82] Liu Y, Li BZ, Wu CJ et al (2016) Simulation-based evaluation of surface micro-cracks and fracture toughness in high-speed grinding of silicon carbide ceramics. Int J Adv Manuf Technol 86:799-808
[83] Shamray S, Azarhoushang B, Paknejad M et al (2022) Ductile-brittle transition mechanisms in micro-grinding of silicon nitride. Ceram Int 48:34987-34998
[84] Chen JY, Shen JY, Huang H et al (2010) Grinding characteristics in high speed grinding of engineering ceramics with brazed diamond wheels. J Mater Process Technol 210:899-906
[85] Huang H, Yin L, Zhou L (2003) High speed grinding of silicon nitride with resin bond diamond wheels. J Mater Process Technol 141:329-336
[86] Xie GZ, Huang H (2008) An experimental investigation of temperature in high speed deep grinding of partially stabilized zirconia. Int J Mach Tools Manuf 48:1562-1568
[87] Huang H, Liu Y (2003) Experimental investigations of machining characteristics and removal mechanisms of advanced ceramics in high speed deep grinding. Int J Mach Tools Manuf 43:811-823
[88] Choudhary A, Paul S (2021) Surface generation in high-speed grinding of brittle and tough ceramics. Ceram Int 47:30546-30562
[89] Liu W, Deng ZH, Shang YY et al (2017) Effects of grinding parameters on surface quality in silicon nitride grinding. Ceram Int 43:1571-1577
[90] Doman D, Warkentin A, Bauer R (2006) A survey of recent grinding wheel topography models. Int J Mach Tools Manuf 46:343-352
[91] Chen DX, Tian YL (2010) Modeling and simulation methodology of the machined surface in ultra-precision grinding. J Mech Eng 46:186-191
[92] Qiao GC, Dong GJ, Zhou M (2013) Simulation and assessment of diamond mill grinding wheel topography. Int J Adv Manuf Technol 68:2085-2093
[93] Hou ZB, Komanduri R (2003) On the mechanics of the grinding process-part I. Stochastic nature of the grinding process. Int J Mach Tools Manuf 43:1579-1593
[94] Adibi H, Jamaati F, Rahimi A (2022) Analytical simulation of grinding forces based on the micro-mechanisms of cutting between grain-workpiece. Int J Adv Manuf Technol 119:4781-4801
[95] Jiang JL, Ge PQ, Hong J (2013) Study on micro-interacting mechanism modeling in grinding process and ground surface roughness prediction. Int J Adv Manuf Technol 67:1035-1052
[96] Li HN, Axinte D (2017) On a stochastically grain-discretised model for 2D/3D temperature mapping prediction in grinding. Int J Mach Tools Manuf 116:60-76
[97] Liu YM, Warkentin A, Bauer R et al (2013) Investigation of different grain shapes and dressing to predict surface roughness in grinding using kinematic simulations. Precis Eng-J Int Soc Precis Eng Nanotechnol 37:758-764
[98] Wang DX, Sun SF, Jiang JL et al (2019) From the grain/workpiece interaction to the coupled thermal-mechanical residual stresses: an integrated modeling for controlled stress grinding of bearing ring raceway. Int J Adv Manuf Technol 101:475-499
[99] Wang S, Li CH, Zhang DK et al (2014) Modeling the operation of a common grinding wheel with nanoparticle jet flow minimal quantity lubrication. Int J Adv Manuf Technol 74:835-850
[100] Sun Y, Su ZP, Gong YD et al (2020) An experimental and numerical study of micro-grinding force and performance of sapphire using novel structured micro abrasive tool. Int J Mech Sci 181:105741. https://doi.org/10.1016/j.ijmecsci.2020.105741
[101] Zhang XH, Kang ZX, Li S et al (2019) Grinding force modelling for ductile-brittle transition in laser macro-micro-structured grinding of zirconia ceramics. Ceram Int 45:18487-18500
[102] Zhang YB, Li CH, Ji HJ et al (2017) Analysis of grinding mechanics and improved predictive force model based on material-removal and plastic-stacking mechanisms. Int J Mach Tools Manuf 122:81-97
[103] Gao T, Li CH, Zhang YB et al (2023) Mechanical behavior of material removal and predictive force model for CFRP grinding using nano reinforced biological lubricant. J Mech Eng 59:325-342
[104] Xiao HP, Yin SX, Wang HR et al (2021) Models of grinding-induced surface and subsurface damages in fused silica considering strain rate and micro shape/geometry of abrasive. Ceram Int 47:24924-24941
[105] Li C, Li XL, Wu YQ et al (2019) Deformation mechanism and force modelling of the grinding of YAG single crystals. Int J Mach Tools Manuf 143:23-37
[106] Zheng ZD, Huang K, Lin CT et al (2022) An analytical force and energy model for ductile-brittle transition in ultra-precision grinding of brittle materials. Int J Mech Sci 220:107107. https://doi.org/10.1016/j.ijmecsci.2022.107107
[107] Sun JA, Li CH, Zhou ZM et al (2023) Material removal mechanism and force modeling in ultrasonic vibration-assisted micro-grinding biological bone. Chin J Mech Eng 36:129. https://doi.org/10.1186/s10033-023-00957-8
[108] Xiao XZ, Zheng K, Liao WH et al (2016) Study on cutting force model in ultrasonic vibration assisted side grinding of zirconia ceramics. Int J Mach Tools Manuf 104:58-67
[109] Wang XZ, Yu TB, Dai YX et al (2016) Kinematics modeling and simulating of grinding surface topography considering machining parameters and vibration characteristics. Int J Adv Manuf Technol 87:2459-2470
[110] Liu MZ, Li CH, Zhang YB et al (2023) Analysis of grain tribology and improved grinding temperature model based on discrete heat source. Tribol Int 180:108196. https://doi.org/10.1016/j.triboint.2022.108196
[111] Liu MZ, Li CH, Zhang YB et al (2023) Analysis of grinding mechanics and improved grinding force model based on randomized grain geometric characteristics. Chin J Aeronaut 36:160-193
[112] Liu W, Deng ZH, Shang YY et al (2019) Parametric evaluation and three-dimensional modelling for surface topography of grinding wheel. Int J Mech Sci 155:334-342
[113] Chen H, Yu TB, Dong JL et al (2019) Kinematic simulation of surface grinding process with random cBN grain model. Int J Adv Manuf Technol 100:2725-2739
[114] Ma ZL, Wang QH, Chen H et al (2022) A grinding force predictive model and experimental validation for the laser-assisted grinding (LAG) process of zirconia ceramic. J Mater Process Technol 302:117492. https://doi.org/10.1016/j.jmatprotec.2022.117492
[115] Meng QY, Guo B, Wu GC et al (2023) Dynamic force modeling and mechanics analysis of precision grinding with microstructured wheels. J Mater Process Technol 314:117900. https://doi.org/10.1016/j.jmatprotec.2023.117900
[116] Sun Y, Su ZP, Jin LY et al (2021) Modelling and analysis of micro-grinding surface generation of hard brittle material machined by micro abrasive tools with helical chip pocket. J Mater Process Technol 297:117242. https://doi.org/10.1016/j.jmatprotec.2021.117242
[117] Li HN, Yu TB, Zhu LD et al (2015) Modeling and simulation of grinding wheel by discrete element method and experimental validation. Int J Adv Manuf Technol 81:1921-1938
[118] Koshy P, Jain V, Lal G (1997) Stochastic simulation approach to modelling diamond wheel topography. Int J Mach Tools Manuf 37:751-761
[119] Tamaki J, Kitagawa T (1995) Evaluation of surface topography of metal-bonded diamond wheel utilizing three-dimensional profilometry. Int J Mach Tools Manuf 10:1339-1351
[120] He Z, Li JY, Liu YM et al (2020) Single-grain cutting based modeling of abrasive belt wear in cylindrical grinding. Friction 8:208-220
[121] Ding WF, Dai CW, Yu TY et al (2017) Grinding performance of textured monolayer CBN wheels: undeformed chip thickness nonuniformity modeling and ground surface topography prediction. Int J Mach Tools Manuf 122:66-80
[122] Li H, Zou L, Wang WX et al (2023) Introducing abrasive wear into undeformed chip thickness modeling with improved grain kinematics in belt grinding. J Manuf Process 108:903-915
[123] Zhang YZ, Fang CF, Huang GQ et al (2018) Modeling and simulation of the distribution of undeformed chip thicknesses in surface grinding. Int J Mach Tools Manuf 127:14-27
[124] Pahlitzsch G, Helmerdig H (1943) Determination and significance of chip thickness in grinding. Workshop Technol 12:397-401
[125] Malkin S, Cook N (1971) The wear of grinding wheels: part 1—attritious wear. J Manuf Sci Eng-Trans ASME 93:1120-1128
[126] Fu H, Jiang LP, Song QH et al (2023) Grinding surface roughness prediction for silicon nitride ceramics: a dynamic grinding force and frequency domain approach. Ceram Int 49:35239-35253
[127] Wu CJ, Dong WJ, Zhu LJ et al (2020) Modeling of grinding chip thickness distribution based on material removel mode in grinding of SiC ceramics. J Adv Mech Des Syst Manuf 14:JAMDSM0018. https://doi.org/10.1299/jamdsm.2020jamdsm0018
[128] Ma LJ, Gong YD, Chen XH et al (2014) Surface roughness model in experiment of grinding engineering glass-ceramics. Proc Inst Mech Eng Part B-J Eng Manuf 228:1563-1569
[129] Mao C, Liang C, Zhang YC et al (2017) Grinding characteristics of cBN-WC-10Co composites. Ceram Int 43:16539-16547
[130] Hwang T, Evans CJ, Whitenton EP et al (2000) High speed grinding of silicon nitride with electroplated diamond wheels, part 1: wear and wheel life. J Manuf Sci Eng 122:32-41
[131] Gopal AV, Rao PV (2004) A new chip-thickness model for performance assessment of silicon carbide grinding. Int J Adv Manuf Technol 24:816-820
[132] Zhang Y, Wu T, Li C et al (2022) Numerical simulations of grinding force and surface morphology during precision grinding of leucite glass ceramics. Int J Mech Sci 231:107562. https://doi.org/10.1016/j.ijmecsci.2022.107562
[133] Jamshidi H, Budak E (2020) An analytical grinding force model based on individual grit interaction. J Mater Process Technol 283:15. https://doi.org/10.1016/j.jmatprotec.2020.116700
[134] Jamshidi H, Gurtan M, Budak E (2019) Identification of active number of grits and its effects on mechanics and dynamics of abrasive processes. J Mater Process Technol 273:116239. https://doi.org/10.1016/j.jmatprotec.2019.05.020
[135] Chen Y, Chen X, Xu XP et al (2018) Quantitative impacts of regenerative vibration and abrasive wheel eccentricity on surface grinding dynamic performance. Int J Adv Manuf Technol 96:2271-2283