Technology of self-repairing and reinforcement of metal worn surface

  • Yi Xu 1 ,
  • Fei Gao 1 ,
  • Bo Zhang 1 ,
  • Feng Nan 1 ,
  • 2 ,
  • Bin-Shi Xu
Expand
  • 1. National Key Laboratory for Remanufacturing, The Academy of  Armored Forces Engineering, Beijing 100072, People’s Republic of China
    2. School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, People’s Republic of China

Received date: 2012-09-08

  Online published: 2012-03-01

Supported by

The paper is financially supported by the National Key Basic Research Program of China (973) (Grant No. 2011CB013405), Young Scientist Fund of NSFC (Grant Nos. 50904072, 50805146), China Postdoctoral Science Foundation (Grant Nos. 20090461452), and China Postdoctoral Science Special Foundation
(Grant No. 201003796).

Abstract

Researches on self-repairing material (serpentine phyllosilicate) of our team in the past few years, such as ultrafining treatment, surface modification, self-repairing mechanism, the effect of rare metal on the self-repairing performance of serpentine, were introduced summarily. The phyllosilicate of serpentine shows excellent tribological and self-repairing performance for metal worn surface as additive in lubricant.

Cite this article

Yi Xu 1 , Fei Gao 1 , Bo Zhang 1 , Feng Nan 1 , 2 , Bin-Shi Xu . Technology of self-repairing and reinforcement of metal worn surface[J]. Advances in Manufacturing, 2013 , 1(1) : 102 -105 . DOI: 10.1007/s40436-013-0009-2

References

1. Shu SJ (1992) Wear of metals. Metallurgy Industrial Press, Beijing

2. Xu BS (2004) Nano surface engineering. Chemical Industry Press, Beijing

3. Yang H, Li SH, Jin YS (2005) Study on tribological behavior of Mg6Si4O10(OH)8 additive package with steel tribo-pair. Tribology 25(4):308–311

4. Jin YS, Li SH, Zhang ZY et al (2004) In situ mechanochemical reconditioning of worn ferrous surfaces. Tribol Int 37(7):561–567

5. Zhang B, Xu Y, Zhang BS et al (2011) Tribological performance research of micro-nano serpentine powders addictive to lubricant oil. Adv Mater Res 154(155):220–225

6. Gao F, Xu Y, Xu BS et al (2011) Study on self-repairing performance and formation mechanism of self-repairing layer of natural serpentine powder as a lubricating oil additive. Tribology 31:431–438

7. Zhang BS, Xu Y, Gao F et al (2011) Sliding friction and wear behaviors of surface-coated natural serpentine mineral powders as lubricant additive. Appl Surf Sci 257:2540–2549

8. Zhang BS, Xu Y, Xu BS et al (2011) The self-reconditioning effect of the phyllosilicate lubricating material on Fe-based tribopairs. J Funct Mater 42(7):1301–1308

9. Zhang BS (2011) Preparation of self-reconditioning materials based on metastable serpentine mineral and investigation on their tribology mechanisms. Dissertation, Shanghai Jiao Tong University

10. Zhang BS, Xu BS, Xu Y et al (2011) Cu nanoparticles effect on the tribological properties of hydrosilicate powders as lubricant additive for steel–steel contacts. Tribol Int 44:878–886

11. Xu Y, Zhang BS, Xu BS et al (2011) Thermodynamic characteristics and tribological properties of lanthanum/serpentine composite lubricating material. Mater Sci Eng Powder Metall 16(3):349–354

12. Zhang B, Xu Y, Gao F et al (2011) Tribological characteristics and self-repairing effect of hydroxy-magnesium silicate on various surface roughness friction pairs. J Cent South Univ Technol 18(5):1326–1333
Outlines

/