Several applications of Origami have been tested in industrial area. However, Origami based design is found only in lamp shade and wrapping in design area, and has not been practically applied especially in clothing. In this paper, the conical truss model is applied in the clothing skirt, and the simulation software from 2D to 3D is developed by parametric Origami module (POM). Finally,the pattern is copied on felt clothing, and the scaled model of skirt on the basis of conical reverse truss model design is made.
Eri Nakayama
,
Sachiko Ishida
,
Yu-Jing Liao
,
Ichiro Hagiwara
. Clothing skirt designed on conical truss model[J]. Advances in Manufacturing, 2013
, 1(2)
: 130
-135
.
DOI: 10.1007/s40436-013-0019-0
1. Miyake Issey’s official site:
http://www.isseymiyake.com/en/. Accessed 20 April 2013
2. Liao YJ, Zhao XL, Ishida S, Hagiwara I (2012) 3D Origami structure design and simulation by parametric origami module. In:Proceedings of the AsiaSim & ICSC, Shanghai, 2012
3. Nojima T, Hagiwara I (2006) Development of newly designed ultra-light core structures. Trans Jpn Soc Mech Eng Int J Ser A 49(1):38–42
4. Nojima T (2000) The creation of foldable conical shell. Trans Jpn Soc Mech Eng 66(1):349–355
5. software ‘‘ORIPA’’:
http://mitani.cs.tsukuba.ac.jp/oripa/. Accessed 20 April 2013
6. Mitani J (2009) A design method for 3D Origami based on rotational sweep. Comput Aided Design Appl 6(1):69–79
7. software ‘‘ORI-REVO’’:
http://mitani.cs.tsukuba.ac.jp/ori_revo/. Accessed 20 April 2013
8. software ‘‘Freeform Origami’’:
http://www.tsg.ne.jp/TT/software/. Accessed 20 April 2013
