Screw failure is one of the main scrap forms for rear axle tube, and thread turning after surfacing is a common means of remanufacturing. This paper takes rear axle tube as the main research topic, which is made of 40Mn and provided by an axle company. Manual electric arc welding, CO2 shielded arc welding and argon shielded arc welding are carried to overlay the damaged thread. The deposited metal consists of two welding material lays.Welding process and overlay properties are characterized by the test and analysis of microstructure, residual stress and hardness of surfacing layers. The results show that
argon shielded arc welding is an effective method to repair the failure thread; its microstructure of fusion area is meticulous and uniform; its residual compressive stress (absolute value) of welding surface is the biggest among the three welding methods; its hardness curve is relatively flat and appropriate for turning.
Shou-Xu Song
,
Yun-Dong Liu
,
Qing-Di Ke
,
Ye-Chao Shen
. Overlaying welding technology and performance of axle tube remanufacturing[J]. Advances in Manufacturing, 2013
, 1(2)
: 143
-150
.
DOI: 10.1007/s40436-013-0023-4
1. Xu BS (2010) Recent progress of remanufacture industry and technology in China. Therm Spray Technol 2:1–6
2. Xie ZH (2011) Efforts to achieve new breakthroughs in the development of remanufacturing industry. China Surf Eng 24:1–3
3. Lund RT, Hauser WM (2010) Remanufacturing: an American perspective. In: Proceedings of 5th international conference on responsive manufacturing—green manufacturing, New Jersey,IET.1–6
4. Steinhilper R, Brent A (2003) Saving product lives in global and local remanufacturing networks: a scientific and commercial work report and an outlook. In: 3rd International symposium on environmentally conscious design and inverse manufacturing,IEEE, New York, pp 297–302
5. Zhang WD, Cui JB (2005) Repairing instances with manual arc resurfacing welding. Equip Technol 2:33–34
6. Sun X (2008) The repair of final axle shaft threads of TY320 bulldozer. Oper Maint 39:65
7. Tang ZW (2007) Exploration of repair methods for driving axle housing of Dongfeng dump truck. Auto Maint Repair 11:73–74
8. Lakshminarayanan AK, Shanmugam K, Balasubramanian V (2009) Effect of welding processes on tensile and impact properties,hardness and microstructure of AISI 409 M ferritic stainless joints fabricated by duplex stainless steel filler metal. J Iron Steel Res Int 16:66–72
9. Xu WG, Burdekin FM (1998) Effects of residual stresses on constraint and fracture behavior of wide plates. Math Phys Eng Sci 454:2505–2528
10. Wang WX, Huo LX, Zhang YF et al (2002) Investigation on phase stress and its application to improving fatigue strength of welding joints. Chin J Mech Eng 38:65–68
11. Hou J, Peng QJ, Takeda Y et al (2010) Microstructure and mechanical property of the fusion boundary region in an alloy 182-low alloy steel dissimilar weld joint. J Mater Sci
45:5332–5338. doi:10.1007/s10853-010-4581-6
