The plasma transferred arc (PTA) forming remanufacturing technology was introduced in this paper.This technology includes plasma surfacing, deposition and rapid forming technology. With self-developed plasma forming system, the thrust of engine cylinder body was remanufactured by PTA powder surfacing. In the concrete,the Ni15 alloy was deposited on the thrust face of the body in order to recover its dimension. In addition, the remanufacturing forming with Fe-based, Inconel 625 alloy was studied. The microstructure and hardness of the as-deposited materials were investigated.
Bin-Shi Xu
,
Yao-Hui Lv
,
Yu-Xin Liu
,
Fu-Jia Xu
. Plasma transferred arc forming technology for remanufacture[J]. Advances in Manufacturing, 2013
, 1(2)
: 187
-190
.
DOI: 10.1007/s40436-013-0017-2
1. Xu BS (2007) Theory and technology of remanufacturing engineering for equipment. National Defense Industry Press, Beijing
2. Xu C (2003) Direct metal forming based on micro-plasma arc welding. Dissertation, Xi’an Jiaotong University, Xian
3. Doumanidis C (1999) Three-dimensional welding update rapid prototyping report. Am Soc Mech Eng 17(6):41–45
4. Yi J, Xu BS, Lu¨ YH et al (2010) Application prospect of plasma welding within remanufacturing engineering. Mech Eng China 5 :52–53
5. Lu¨ YH, Xu BS, Xiang YH (2009) The microstructure and property of Ni-based overlay prepared by plasma overlaying on gray cast.China Surf Eng 2:46–48
6. Lu¨ YH, Xu BS, Xiang YH et al (2008) Plasma transferred arc powder surfacing technology of thrust face. Key Eng Mater 373–374:43–46
7. Xu FJ, Lu¨ YH, Xu BS et al (2012) Study on process of rapid prototyping based on pulsed plasma arc welding. Mater Sci Technol 20(3):89–93
8. Lu¨ YH, Xu BS, Xiang YH et al (2009) Microstructure and properties of part made by micro-plasma arc direct metal formation. Heat Treat Metals 12:65–67
