The high power light emitting diode (LED) array integrated with the microchannel heat sink is designed in this paper, and then optimal analysis and simulation have been carried out. According to the theory of heat transfer and fluid mechanics, the calculation of the thermal resistance for the microchannel heat sink is obtained, and the thermal resistance is minimized. Finally the simulation with FLUENT software is developed to verify the theoretical analysis.
Established analysis and simulation show that the width of the cooling channel is 0.1 mm, and the cooling water flow rate is 1 m/s. On the other hand, the system acquires the best heat dissipation effect, and the minimum of thermal resistance is 0.019 W/℃.
Xin Zhang
,
Ru-Chun Li
,
Qi Zheng
. Analysis and simulation of high-power LED array with microchannel heat sink[J]. Advances in Manufacturing, 2013
, 1(2)
: 191
-195
.
DOI: 10.1007/s40436-013-0027-0
1. Tuckerman DB, Pease RFW (1981) High performance heat sinking for VLSI. IEEE Electron Device Lett 2(5):126–129
2. Liu L, Zhang GQ, Yang DG, Pan KL, Zhong H, Hou FZ (2010) Thermal analysis and comparison of heat dissipation methods on high-power LEDs. In: IEEE high density packaging
3. Li RC (2010) Research on thermal resistance of high-power LED arrays based on microchannel cooler. Semicond Optoelectron 31(4):8
4. Mao ZM (2012) Thermal modeling and design for microchannel cold plate with high temperature uniformity subjected to multiple heat sources. Int Commun Heat Mass Transf 39(6):781–785
5. Ge J, He W (2008) Thermal analysis and simulation for hydrocooling-heat sink of transistors. Mach Tool Hydraul (5):161–164
6. Knight RW, Hall DJ, Goodling JS, Jaeger RC (1992) Heat sink optimization with application to microchannels. IEEE Trans Compon Hybrids Manuf Technol 15(5):832–842
7. Lee PS, Garimella SV (2006) Thermally developing flow and heat transfer in rectangular microchannels of different aspect ratios. Int J Heat Mass Transf 49:3060–3067
8. Yuan LL, Liu S, Chen MX, Luo XB (2006) Thermal analysis of high-power LED array packaging with microchannel cooler. In:7th IEEE international conference on electronics packaging technology, 26–29 August 2006
9. Ma ZT, Wang XJ, Zhu DQ, Liu S (2005) Thermal analysis and modeling of LED arrays integrated with an innovative liquidcooling module. In: 6th International conference on electronic packaging technology, Shenzhen, 2–2 September 2005
10. Kishimoto T, Ohsaki T (1986) VLSI packaging technique using liquid-cooled channels. IEEE Trans Compon Hybrids Manuf Technol 9(4):328–335
11. Yang CC, Wang CQ, Hang CJ (2010) Water cooling design for high-power LED multi-chip module. Electron Process Technol 31(5):253–257
12. Steinke ME, Kandlikar SG (2004) Single-phase heat transfer enhancement techniques in microchannel and minichannel flows.In: Proceedings of the 2nd international conference on microchannels and minichannels
13. Shi S, Li S, Zhang HY (2010) Thermal field calculation and analysis of water-cooled heat sink in a three-level SFC. J Chin Soc Power Eng 30:76–80
