1. Paul CP, Bhargava P, Kumar A et al (2012) Laser rapid manufacturing:technology, applications, modeling and future prospects.In: Paulo Davim J (ed) Lasers in manufacturing. Wiley,London, pp 1–67
2. Kukreja LM, Kaul R, Paul CP et al (2013) Emerging laser materials processing techniques for future industrial applications.In: Majumdar JD, Manna I (eds) Laser-assisted fabrication of materials, vol 161. Springer, New York, pp 423–478
3. Xu F, Lv Y, Liu Y et al (2013) Microstructural evolution and mechanical properties of Inconel-625 alloy during pulsed plasma arc deposition process. Mater Sci Technol. doi:10.1016/j.jmst.2013.02.010
4. Paul CP, Jain A, Ganesh P et al (2006) Laser rapid manufacturing of Colmonoy-6 components. Opt Lasers Eng 44:1096–1109
5. Song L, Singh VB, Dutta B et al (2011) Control of melt pool temperature and deposition height during direct metal deposition process. Int J Manuf Technol. doi:10.1007/s00170-011-3395-2
6. Moat RJ, Pinkerton A, Li L et al (2009) Crystallographic texture and microstructure of pulsed diode laser-deposited Waspaloy.Acta Mater 5:1220–1229
7. Nowotny S, Scharek S, Beyer E et al (2007) Laser beam build-up welding: precision in repair, surface cladding, and direct 3D metal deposition. J Therm Spray Technol 16:344–348
8. Imran MK, Masood SH Brandt M (2010) Bimetallic dies with direct metal-deposited steel on Moldmax for high-pressure die casting application. Int J Adv Manuf Technol 52:855–863
9. d’Oliveira ASCM, Vilar R, Feder CG (2002) High temperature behavior of plasma transferred arc and laser Co-based alloy coatings. Appl Surf Sci 201:154–160
10. Gatto A, Bassoli E, Fornari M (2004) Plasma transferred arc deposition of powdered high performances alloys: process parameters optimization as a function of alloy and geometrical configuration. Surf Coat Technol 187:265–271
11. Zhao W, Liu L (2006) Structural characterization of Ni-based superalloy manufactured by plasma transferred arc-assisted deposition. Surf Coat Technol 201:1783–1787
12.
http://www.specialmetals.com/documents/Inconel%20alloy%20625.pdf. Accessed 5 Sept 2013
13. Thivillon L, Bertrand LP, Laget B et al (2009) Potential of direct metal deposition technology for manufacturing thick functionally graded coatings and parts for reactors components. J Nucl Mater 385:236–241
14. Nath AK, Reghu T, Paul CP et al (2005) High-power transverse flow CW CO2 laser for material processing applications. Opt Laser Technol 37:329–333
15. Paul CP, Negi J, Nath AK (2002) Parametric dependence and fabrication time in laser rapid manufacturing. Met Mater Process 14(3):2163–2172
16. Paul CP, Ganesh P, Mishra SK et al (2007) Investigating laser rapid manufacturing for Inconel-625 components. Opt Laser Technol 39:800–805
17. Dinda GP, Dasgupta AK, Majumder J (2009) Laser aided direct metal deposition of Inconel-625 superalloy: microstructural evolution and thermal stability. Mater Sci Eng A 509:98–104
18. Ahn Y, Yoon B, Kim H et al (2002) Effect of dilution on the behavior of solidification cracking in PTAW overlay deposit on Ni-base superalloys. Met Mater Int 8:469–477
19. Lv YH, Liu YX, Xu FJ et al (2013) Plasma transferred arc forming technology for remanufacture. Adv Manuf. doi:10.1007/s40436-013-0017-2
20. Bhargava AK, Sharma CP (2011) Mechanical behavior and testing of materials. PHI Learning Pvt Limited, New Delhi
21. Paul CP, Alemohammad H, Toyserkani E et al (2007) Cladding of WC–12 Co on low carbon steel using a pulsed Nd: YAG laser.Mater Sci Eng A 464(1):170–176
