This paper highlights the available numerical computation techniques in mechanical engineering field with focus on application of modeling and simulation within renewable energy conversion machines as a particular research case. The study makes special focus on simulation approaches based on finite elements and multibody dynamics that are currently focused within the research community. Developing the simulation model in a computer-aided design (CAD) tool is a precondition for a successful simulation-based mechanical system research. The article discusses and elaborates the methods implemented to integrate design data with other computer-aided engineering functions. The motivation is the fact that simulation-based research is useful for design optimization of mechanical systems that operate in harsh and unfriendly environment where conducting physical testing of prototypes is difficult. In addition, the manufacturing environment is benefiting from the developments in numerical computation techniques through machining simulation that significantly reduce the time-to-market and thus increase competitiveness. The study is also intended to explore the existing gaps of capabilities in current approaches in application of computational techniques in order to draw attention to future challenges and trends.
Hirpa G. Lemu
. Advances in numerical computation based mechanical system design and simulation[J]. Advances in Manufacturing, 2015
, 3(2)
: 130
-138
.
DOI: 10.1007/s40436-015-0110-9
1. Petrova R, Lemu HG, Larion I (2013) Study of horizontal axis wind turbine blade in virtual wind tunnel simulator. In: Proceedings of ASME 2013 international mechanical engineering congress and exposition (IMECE2013), 14-21 Nov 2013, San Diego, CA, USA
2. Milano F (2004) An open source power system analysis toolbox. IEEE Trans Power Syst 20:1199-1206
3. Li W, Vanfretti L, Chompoobutrgool Y (2012) Development and implementation of hydro turbine and governor models in a free and open source software package. Simul Model Pract Theor24:84-102
4. Cigel R et al (2011) Simulation data management—survey report, NAFEMS 2011
5. Courant R (1943) Variational methods for the solution of problems of equilibrium and vibrations. Bull Am Math Soc 49:1-23
6. Lemu HG (2013) Study of the role of virtual engineering technologies in design. In: Wang KS, Strandhagen JO, Tu DW (eds) Proceedings of international workshop of advanced manufacturing and automation (IWAMA 2013), Tapir Academic Press, Trondheim, No 4, pp 59-69
7. Luo N, Pacheco L, Vidal Y, Li H (2012) Smart structural control strategies for offshore wind power generation with floating wind turbines. In: Proceedings of international conference on renewable energies & power quality journal, Santiago de Compostela, Spain
8. Lemu HG (2014) Virtual engineering in design and manufacturing. Adv Manuf 2:289-294
9. Petrova R, Lemu HG (2014) Stress and displacement analysis of a HAWT under time-variable wind. In: ASME 2014, international mechanical engineering congress and exposition (IMECE2014), 14-20 Nov 2014, Montreal, Canada
10. Petrova R, Lemu HG (2012) Design study for dynamic behavior of wind turbine blade. In: Proceedings of international workshop of advanced manufacturing and automation (IWAMA 2012), Tapir Academic Press, Trondheim, pp 131-138
11. Shienlen W (1997) Multibody dynamics: roots and perspectives. Multibody Syst Dyn 1:149-188
12. Shen X, Zhu X, Du Z (2011) Wind turbine aerodynamics and loads control in wind shear flow. Energy 36(3):1424-1434
13. Hansen MOL et al (2006) State of the art in wind turbine aerodynamics and aeroelasticity. Progress Aerosp Sci 42(4):285-330
14. Lanzafame R, Messina M (2007) Fluid dynamics wind turbine design: critical analysis, optimization and application of BEM theory. Renew Energy 32(14):2291-2305
15. Rajakumar S, Ravindran D (2012) Iterative approach for optimizing coefficient of power, coefficient of lift and drag of wind turbine rotor. Renew Energy 38:83-93
16. Glauert H (1963) Airplane propellers. In: Durand WF (ed) Aerodynamic theory. Dover, New York, pp 182-269
17. Manwell JF, McGrowan JG, Rogers AL (2009) Wind energy explained, theory, design and application. Wiley, Chichester
18. Helsen J, Vanhollebeke F et al (2011) Multibody modelling of varying complexity for modal behavior analysis of wind turbine gearboxes. Renew Energy 36:3098-3113
19. Sarangi M, Majumdar B, Sekhar A (2004) Stiffness and damping characteristics of lubricated ball bearings considering the surface roughness effect. part 1: theoretical formulation. Proceedings of the Institution of Mechanical Engineers. Part J: J Eng Tribol218:529-538
20. Tomulik P, Fraczek J (2011) Simulation of multibody systems with the use of coupling techniques: a case study. Multibody Syst Dyn 25:145-165
21. Das M, Barut A, Madenci E (2010) Analysis of multibody systems experiencing large elastic deformations. Multibody Syst Dyn 23:1-31
22. Wasfy TM, Noor AK (2003) Computational strategies for flexible multibody systems. Appl Mech Rev 56:553-613
23. Hong D, Ren G (2011) A modelling of sliding joint on onedimensional flexible medium. Multibody Syst Dyn 26:91-106
24. Finnegan W, Goggins J (2012) Numerical simulation of linear water waves and wave-structure interaction. Ocean Eng 43:23-31
25. Nunes G, Valério D et al (2011) Modelling and control of a wave energy converter. Renew Energy 36:1913-1921
26. Babarit A, Hals J et al (2012) Numerical benchmarking study of a selection of wave energy converters. Renew Energy 41:44-63
27. Buchner B (2010) Model tests and simulations on a wave energy converter based on inverse offshore engineering. Offshore Technol Conf. doi:10.4043/20366-MS
28. Li Y, Yu YH (2012) A synthesis of numerical methods for modelling wave energy converter-point absorbers. Renew Sustain Energy Rev 16:4352-4364
29. Nagata S, Toyota K et al (2009) Numerical simulation for evaluation of primary energy conversion of floating OWC-type wave energy converter. In: Proceedings of the International offshore and polar engineering conference, Osaka, Japan, pp 300-307
30. Hong DC, Hong SY, Hong SW (2004) Numerical study on the reverse drift force of floating BBDB wave energy absorbers. Ocean Eng 31:1257-1294
31. Sun L, Taylor RE, Choo YS (2012) Multibody dynamic analysis of float-over installations. Ocean Eng 51:1-15
32. Taghipour R, Arswendy A et al (2008) Structural analysis of a multibody wave energy converter in the frequency domain by interfacing WAMIT and ABAQUS. In: Proceedings of the international conference on offshore mechanics and arctic engineering— OMAE, No 1, pp 867-880
33. Park JC, Uno Y et al (2004) Numerical reproduction of fully nonlinear multi-directional waves by a viscous 3D numerical wave tank. Ocean Eng 31:1549-1565
34. Nader JR, Zhu SP et al (2012) A finite element study of the efficiency of arrays of oscillating water column wave energy converters. Ocean Eng 43:72-81
