Experimental investigation into fabrication of microfeatures on titanium by electrochemical micromachining
Received date: 2015-06-25
Revised date: 2016-05-17
Online published: 2016-06-25
Titanium machining is one of the challenging tasks to modern machining processes. Especially fabricating microfeatures on titanium appear as a potential research interest. Electrochemical micromachining (EMM) is an effective process to generate microfeatures by anodic dissolution. Machining of titanium by anodic dissolution is different than other metals because of its tendency to form passive oxide layer. The phenomenon of progression of microfeature by conversion of passive oxide layer into transpassive has been investigated with the help of maskless EMM technique. Suitable range of machining voltage has been established to attain the controlled anodic dissolution of titanium by converting passive oxide film of titanium into transpassive with nonaqueous electrolyte. The experimental outcomes revealed that the micromachining of titanium with controlled anodic dissolution could be possible even at lower machining voltage in the range of 6-8 V. This work successfully explored the possibility of generation of microfeatures on commercially pure titanium by anodic dissolution process in microscopic domain by demonstrating successful fabrication of various microfeatures, such as microholes and microcantilevers.
Sandip S. Anasane , B. Bhattacharyya . Experimental investigation into fabrication of microfeatures on titanium by electrochemical micromachining[J]. Advances in Manufacturing, 2016 , 4(2) : 167 -177 . DOI: 10.1007/s40436-016-0145-6
1. Jain VK, Kalia S, Sidpara A et al (2012) Fabrication of microfeatures and micro-tools using electrochemical micromachining. Int J Adv Manuf Technol 61:1175-1183
2. Zhang Z, Zhu D, Qu N (2007) Theoretical and experimental investigation on electrochemical micromachining. Microsyst Technol 13:607-612
3. Malapati M, Bhattacharyya B (2011) Investigation into electrochemical micromachining process during micro-channel generation. Mater Manuf Process 26:1019-1027
4. Yang X, Liu CR (1999) Machining titanium and its alloys. Mach Sci Technol 3(1):107-139
5. Ezugwu EO, Wang ZM (1997) Titanium alloys and their machinability-a review. J Mater Process Technol 68:262-274
6. Kumar J, Khamba JS, Mohapatra SK (2008) An investigation into the machining characteristics of titanium using ultrasonic machining. Int J Mach Mach Mater 3(1-2):143-161
7. Lin YC, Yan BH, Chang YS (2000) Machining characteristics of titanium alloy (Ti6Al4V) using a combination process of EDM with USM. J Mater Process Technol 104:171-177
8. Dhobe SD, Doloi B, Bhattacharyya B (2011) Surface characteristics of ECMed titanium work samples for biomedical applications. Int J Adv Manuf Technol 55:177-188
9. Dyaminov RD, Mal'tsev AN, Kargin GV (1977) Electrochemical machining of titanium-rotor cast blades for vortex pumps. Chem Pet Eng 13(9):817-818
10. Aladjem A (1973) Anodic oxidation of titanium and its alloys. J Mater Sci 8:688-704
11. Zinger O, Chauvy PF, Landolt D (2003) Scale-resolved electrochemical surface structuring of titanium for biological applications. J Electrochem Soc 150(11B):495-503
12. Landolt D, Chauvy PF, Zinger O (2003) Electrochemical micromachining, polishing and surface structuring of metals:fundamental aspects and new developments. Electrochem Acta 48:3185-3201
13. Bannard J (1976) On the electrochemical machining of some titanium alloys in bromide electrolytes. J Appl Electrochem 6:477-483
14. Madore C, Landolt D (1997) Electrochemical micromachining of controlled topographies on titanium for biological applications. J Micromech Microeng 7:270-275
15. Sjöström T, Su B (2011) Micropatterning of titanium surfaces using electrochemical micromachining with an ethylene glycol electrolyte. Mater Lett 65:3489-3492
16. De Silva AKM, Altena HSJ, McGeough JA (2000) Precision ECM by process characteristic modeling. Ann CIRP 49(1):151-156
17. Ghoshal B, Bhattacharyya B (2013) Influence of vibration on micro-tool fabrication by electrochemical machining. Int J Mach Tool Manuf 64:49-59
18. Rathod V, Doloi B, Bhattacharyya B (2014) Sidewall insulation of microtool for electrochemical micromachining to enhance the machining accuracy. Mater Manuf Process 29:305-313
/
| 〈 |
|
〉 |
