The experimental determination of stability lobe diagrams (SLDs) in milling can be realized by either continuously varying the spindle speed or by varying the depth of cut. In this paper, a method for combining both these methods along with an online chatter detection algorithm is proposed for efficient determination of SLDs. To accomplish this, communication between the machine control and chatter detection algorithm is established, and the machine axes are controlled to change the spindle speed or depth of cut. The efficiency of the proposed method is analyzed in this paper.
The full text can be downloaded at https://link.springer.com/content/pdf/10.1007%2Fs40436-018-0225-x.pdf
Christian Brecher
,
Prateek Chavan
,
Alexander Epple
. Efficient determination of stability lobe diagrams by in-process varying of spindle speed and cutting depth[J]. Advances in Manufacturing, 2018
, 6(3)
: 272
-279
.
DOI: 10.1007/s40436-018-0225-x
1. Tlusty J, Ismail F (1981) Basic non-linearity in machining chatter. Ann CIRP 30:299-304
2. Altintas Y, Budak E (1995) Analytical prediction of stability lobes in milling. Ann CIRP 44:357-362
3. Altintas Y, Budak E (1998) Analytical prediction of chatter stability in milling-part I:general formulation. J Dyn Syst Meas Control 120(1):22-30
4. Altintas Y, Budak E (1998) Analytical prediction of chatter stability in milling-part Ⅱ:application of the general formulation to common milling systems. J Dyn Syst Meas Control 120(1):31-36
5. Quintana G, Ciurana J, Teixidor D (2008) A new experimental methodology for identification of stability lobes diagram in milling operations. Mach Tools Manuf 48:1637-1645
6. Grossi N, Scippa A, Sallese L et al (2015) Spindle speed ramp-up test:a novel experimental approach for chatter stability detection. Mach Tools Manuf 89:221-230
7. Davies MA, Dutterer B, Pratt JR et al (1998) On the dynamics of high-speed milling with long, slender endmills. Ann CIRP 47:55-60
8. Surmann T (2005) Geometric-physical simulation of the process dynamics for five-axis milling of free-form surface. Dissertation, Dortmund University
9. Honeycutt A, Schmitz T (2016) A new metric for automated stability identification in time domain milling simulation. J Manuf Sci Eng 138(7):074501
10. Schmitz T, Medicus K, Dutterer B (2002) Exploring once-perrevolution audio signal variance as a chatter indicator. Mach Sci Technol 6(2):215-233
11. Brecher C, Epple A, Fey M (2014) Efficient determination of optimal process parameter. wtWerkstatttechnik online 104:260-265
12. Brecher C, Kiesewetter C, Epple A et al (2015) Automated creation of stability lobes diagrams for milling. ZWF 110(4):191-195
13. Brecher C, Chavan P, Epple A (2017) Efficient determination of stability boundaries. wtWerkstattstechnik online 107(5):313-317
14. Brecher C, Daniels M, Wellmann F et al (2015) Realisation of efficient cutting processes. Result report of the BMBF-joint project ReffiZ. Shaker-Verlag, Aachen
