Research on dynamics and stability of machining operations has attracted considerable attention. Currently, most studies focus on the forward solution of dynamics and stability in which material properties and the frequency response function at the tool tip are known to predict stable cutting conditions. However, the forward solution may fail to perform accurately in cases wherein the aforementioned information is partially known or varies based on the process conditions, or could involve several uncertainties in the dynamics. Under these circumstances, inverse stability solutions are immensely useful to identify the amount of variation in the effective damping or stiffness acting on the machining system. In this paper, the inverse stability solutions and their use for such purposes are discussed through relevant examples and case studies. Specific areas include identification of process damping at low cutting speeds and variations in spindle dynamics at high rotational speeds.
The full text can be downloaded at https://link.springer.com/content/pdf/10.1007%2Fs40436-018-0233-x.pdf
Lutfi Taner Tunc
,
Orkun Ozsahin
. Use of inverse stability solutions for identification of uncertainties in the dynamics of machining processes[J]. Advances in Manufacturing, 2018
, 6(3)
: 308
-318
.
DOI: 10.1007/s40436-018-0233-x
1. Taylor FW (1907) On the art of cutting metals. American Society of Mechanical Engineers, New York
2. Altintas Y, Budak E (1995) Analytical prediction of stability lobes in milling. Ann CIRP 44(1):357-362
3. Insperger T, Stepan G (2002) Semi-discretization method for delayed systems. Int J Numer Methods Eng 55(5):503-518
4. Tlusty J, Polacek M (1963) The stability of machine tools against self-excited vibrations in machining. Int Res Prod Eng 465-474
5. Das MK, Tobias SA (1967) The relation between the static and the dynamic cutting of metals. Int J Mach Tool Des Res 763:89
6. Koenigsberger F, Tlusty J (1967) Machine tool structures-Vol. I:stability against chatter. Pergamon Press, Oxford
7. Opitz H, Bernardi F (1970) Investigation and calculation of the chatter behavior of lathes and milling machines. Ann CIRP 18:335-343
8. Sridhar R, Hohn RE, Long GW (1968) A stability algorithm for the general milling process:contribution to machine tool chatter research 7. J Eng Ind 90(2):330-334
9. Minis I, Yanushevsky T, Tembo R et al (1990) Analysis of linear and nonlinear chatter in milling. Ann CIRP 39:459-462
10. Tlusty J (1978) Analysis of the state of research in cutting dynamics. Ann CIRP 27(2):583-589
11. Sisson TR, Kegg RL (1969) An explanation of low-speed chatter effects. ASME J Eng Ind 91:558-951
12. Wu DW (1984) A new approach of formulating the transfer function for dynamic cutting processes. J Eng Ind 111:37-47
13. Budak E, Tunc LT (2009) A new method for identification and modeling of process damping in machining. J Manuf Sci Eng 131(5):051019
14. Rivin E (1999) Stiffness and damping in mechanical design. Marcel Dekker Inc., New York
15. Stone BJ (1982) The state of the art in the measurement of the stiffness and damping of rolling element bearings. CIRP Ann Manuf Technol 31:529-538
16. Harris TA (2001) Rolling bearing analysis, 4th edn. Wiley, New York
17. Lee CW (1993) Vibration analysis of rotors. Kluwer, Dordrecht
18. Friswell MI, Penny JET, Garvey SD et al (2010) Dynamics of rotating machines. Cambridge University Press, Cambridge
19. Jiang JS, Zheng S (2010) A modeling approach for analysis and improvement of spindle-drawbar-bearing assembly dynamics. Int J Mach Tools Manuf 50(1):131-142
20. Kruth JP, Liu AMM, Vanherck P et al (2002) A strategy for selection of optimal cutting parameter in high-speed milling to avoid chatter vibration. Int J Prod Eng Comput 4(5):35-42
21. Kilic ZM, Iglesias A, Munoa J et al (2010) Investigation of tool wear on the stability of milling process using an inverse method. In:CIRP 2nd international conference on process machine interactions, Vancouver, Canada
22. Suzuki N, Kurata Y, Kato T et al (2012) Identification of transfer function by inverse analysis of self-excited chatter vibration in milling operations. Precis Eng 36(4):568-575
23. Cao Y, Altintas Y (2004) A general method for the modeling of spindle-bearing systems. J Mech Des 126(6):557-566
24. Altintas Y, Cao Y (2005) Virtual design and optimization of machine tool spindles. CIRP Ann Manuf Technol 54(1):379-382
25. Lin CW, Tu JF, Kamman J (2003) An integrated thermo-mechanical-dynamic model to characterize motorized machine tool spindles during very high-speed rotation. Int J Mach Tools Manuf 43(10):1035-1050
26. Tatar K, Gren P (2007) Measurement of milling tool vibrations during cutting using laser vibrometry. Int J Mach Tools Manuf 48:380-387
27. Rantatalo M, Aidanpaa JO, Göransson B et al (2007) Milling machine spindle analysis using FEM and non-contact spindle excitation and response measurement. Int J Mach Tools Manuf 47:1034-1045
28. Zaghbani I, Songmene V (2009) Estimation of machine-tool dynamic parameters during machining operation through operational modal analysis. Int J Mach Tools Manuf 49:947-957
29. Opitz H, Weck MC (1970) Determination of the transfer function by means of spectral density measurements and its application to dynamic investigation of machine tools under machining conditions. In:Proceedings of the 10th international MTDR conference, University of Manchester Institute of Science and Technology, Manchester
30. Minis IE, Magrab EB, Pandelidis IO (1990) Improved methods for the prediction of chatter in turning Part 1:determination of structural response parameters. Trans ASME 112:12-20
31. Ozsahin O, Budak E, Ozguven HN (2011) Investigating dynamics of machine tool spindles under operational conditions. Adv Mater Res 223:610-621
32. Bediz B, Kumar U, Schmitz TL et al (2012) Modeling and experimentation for three-dimensional dynamics of endmills. Int J Mach Tools Manuf 53(1):39-50
33. Ozsahin O, Budak E, Ozguven HN (2015) In-process tool point FRF identification under operational conditions using inverse stability solution. Int J Mach Tools Manuf 89:64-73
34. Tunç LT, Budak E (2013) Identification and modeling of process damping in milling. Trans ASME J Manuf Sci Eng 135(2):021001
