Resin flow correction control with electromagnetic field source, a new variation of the vacuum-assisted resin transfer molding (VARTM) process called electromagnetically induced preform resting (EIPR) for dynamical resin flow controlling is introduced to manipulate the flow front and local permeability to prevent the formation of dry spots. This paper proposes an active and real-time flow control approach that is implemented during the composite laminate infusion. The EIPR process applies an electromagnetic field source to pinch (raise) and vibrate the upper flexible mold to rest the fiber preform and increase the local permeability. Vibration action delivers the fluid through the preform. The EIPR process includes a new and creative upper flexible vacuum bag with embedded elements to lift and create local vibrations via an automated gantry system. The control methodology is performed by tracking the flow front with a real-time correction. System capability is demonstrated with three configurations of preform of different preform permeabilities in each experiment. A low permeability preform is employed in these configurations to disturb the flow pattern and cause an artificial problem or pseudo problem during the filling process. The results indicate that this system fills the mold completely and reduces the filling time without any dry spots and therefore creates no waste material.
The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-019-00257-2
Mohsen Poorzeinolabedin
,
Kemal Levend Parnas
. Flow correction control with electromagnetically induced preform resting process[J]. Advances in Manufacturing, 2019
, 7(2)
: 199
-208
.
DOI: 10.1007/s40436-019-00257-2
1. Smooth-on (2019) www. smooth-on. com. Accessed 9 May 2019
2. Brouwer WD, Van Herpt ECFC, Labordus M (2003) Vacuum injection moulding for large structural applications. Compos Part A Appl Sci Manuf 34(6):551-558
3. Williams CD, Grove SM, Summerscales J (1998) The compression response of fibre-reinforced plastic plates during manufacture by the resin infusion under flexible tooling method. Compos Part A Appl Sci Manuf 29(1-2):111-114
4. Poorzeinolabedin M, Parnas L, Dashatan SH (2014) Resin infusion under flexible tooling process and structural design optimization of the complex composite part. Mater Des 64(8):450-455
5. Bayldon JM, Daniel IM (2009) Flow modeling of the VARTM process including progressive saturation effects. Compos Part A Appl Sci Manuf 40(8):1044-1052
6. Hsiao KT, Heider D (2012) Vacuum assisted resin transfer molding (VARTM) in polymer matrix composites. In:Manufacturing techniques for polymer matrix composites (PMCs). Woodhead Publishing Limited, Sawston, p 310-347
7. Hancox NL (1977) The effects of flaws and voids on the shear properties of CFRP. J Mater Sci 12(5):884-892
8. Liu X, Chen F (2016) A review of void formation and its effects on the mechanical performance of carbon fiber reinforced plastic. Eng Trans 64(1):33-51
9. Johnson RJ, Pitchumani R (2008) Active control of reactive resin flow in a vacuum assisted resin transfer molding (VARTM) process. J Compos Mater 42(12):1205-1229
10. Matsuzaki R, Kobayashi S, Todoroki A et al (2011) Control of resin flow/temperature using multifunctional interdigital electrode array film during a VARTM process. Compos Part A Appl Sci Manuf 42(7):782-793
11. Alms JB, Glancey JL, Advani SG (2010) Mechanical properties of composite structures fabricated with the vacuum induced preform relaxation process. Compos Struct 92(12):2811-2816
12. Nielsen DR, Pitchumani R (2002) Control of flow in resin transfer molding with real-time preform permeability estimation. Polym Compos 23(6):1087-1110
13. Konstantopoulos S, Fauster E, Schledjewski R (2014) Monitoring the production of FRP composites:a review of in-line sensing methods. Express Polym Lett 8(11):823-840
14. Yenilmez B, Murat Sozer E (2009) A grid of dielectric sensors to monitor mold filling and resin cure in resin transfer molding. Compos Part A Appl Sci Manuf 40(4):476-489
15. Schmachtenberg E, Schulte Zur Heide J, Töpker J (2005) Application of ultrasonics for the process control of resin transfer moulding (RTM). Polym Test 24(3):330-338
16. Carlone P, Rubino F, Paradiso V et al (2018) Multi-scale modeling and online monitoring of resin flow through dual-scale textiles in liquid composite molding processes. Int J Adv Manuf Technol 96(5-8):2215-2230
17. Matsuzaki R, Shiota M (2017) Data assimilation for three-dimensional flow monitoring in non-flat composite structures during vacuum-assisted resin transfer molding:a numerical study. Compos Struct 172:155-165
18. Devillard M, Hsiao KT, Advani SG (2005) Flow sensing and control strategies to address race-tracking disturbances in resin transfer molding-Part Ⅱ:automationand validation. Compos Part A Appl Sci Manuf 36:1581-1589
19. Nielsen DR, Pitchumani R (2002) Control of flow in resin transfer molding with real-time preform permeability estimation. Polym Compos 23(6):1087-1110
20. Nielsen DR, Pitchumani R (2002) Closed-loop flow control in resin transfer molding using real-time numerical process simulations. Compos Sci Technol 62(2):283-298
21. Nalla AR, Fuqua M, Glancey J et al (2007) A multi-segment injection line and real-time adaptive, model-based controller for vacuum assisted resin transfer molding. Compos Part A Appl Sci Manuf 38(3):1058-1069
22. Modi D, Correia N, Johnson M et al (2007) Active control of the vacuum infusion process. Compos Part A Appl Sci Manuf 38(5):1271-1287
23. Johnson RJ, Pitchumani R (2003) Enhancement of flow in VARTM using localized induction heating. Compos Sci Technol 63(15):2201-2215
24. Matsuzaki R, Kobayashi S, Todoroki A et al (2013) Flow control by progressive forecasting using numerical simulation during vacuum-assisted resin transfer molding. Compos Part A Appl Sci Manuf 45:79-87
25. Alms J, Advani SG (2007) Simulation and experimental validation of flow flooding chamber method of resin delivery in liquid composite molding. Compos Part A Appl Sci Manuf 38(10):2131-2141
26. Alms JB, Advani SG, Glancey JL (2011) Liquid composite molding control methodologies using vacuum induced preform relaxation. Compos Part A Appl Sci Manuf 42(1):57-65
27. Domínguez JC, Oliet M, Alonso MV et al (2013) Structural, thermal and rheological behavior of a bio-based phenolic resin in relation to a commercial resol resin. Ind Crops Prod 42:308-314
28. Vernet N, Ruiz E, Advani S et al (2014) Experimental determination of the permeability of engineering textiles:benchmark Ⅱ. Compos Part A Appl Sci Manuf 61:172-184
