A review on conventional and nonconventional machining of SiC particle-reinforced aluminium matrix composites

Ji-Peng Chen; Lin Gu; Guo-Jian He

doi:10.1007/s40436-020-00313-2

Advances in Manufacturing >

2020 , Vol. 8 >Issue 3: 279 - 315

DOI: https://doi.org/10.1007/s40436-020-00313-2

ARTICLES

A review on conventional and nonconventional machining of SiC particle-reinforced aluminium matrix composites

Ji-Peng Chen ,
Lin Gu ,
Guo-Jian He

Expand

1 School of Mechanical and Electronic Engineering, Nanjing Forestry University, Nanjing 210037, People's Republic of China;
2 Department of Mechanical Engineering, Polytechnic University of Milan, Piazza Leonardo da Vinci 32, Milan 20133, Italy;
3 State Key Laboratory of Mechanical System and Vibration, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, People's Republic of China

Received date: 2019-12-28

Revised date: 2020-03-28

Online published: 2020-09-10

Supported by

This work was supported by National Natural Science Foundation of China (Grant Nos. 51975371 and 51575351), Innovation and entrepreneurship project for high-level talents in Jiangsu province (Grant No. 164040022), Youth science and technology innovation fund of NJFU (Grant No. CX2018017), PNFD (a project funded by the National First-class Disciplines), and PAPD (a project funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions).

Fold

Abstract

Among the various types of metal matrix composites, SiC particle-reinforced aluminum matrix composites (SiC_p/Al) are finding increasing applications in many industrial fields such as aerospace, automotive, and electronics. However, SiC_p/Al composites are considered as difficult-to-cut materials due to the hard ceramic reinforcement, which causes severe machinability degradation by increasing cutting tool wear, cutting force, etc. To improve the machinability of SiC_p/Al composites, many techniques including conventional and nonconventional machining processes have been employed. The purpose of this study is to evaluate the machining performance of SiC p/Al composites using conventional machining, i.e., turning, milling, drilling, and grinding, and using nonconventional machining, namely electrical discharge machining (EDM), powder mixed EDM, wire EDM, electrochemical machining, and newly developed high-efficiency machining technologies, e.g., blasting erosion arc machining. This research not only presents an overview of the machining aspects of SiC_p/Al composites using various processing technologies but also establishes optimization parameters as reference of industry applications.

The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-020-00313-2

Key words： SiC_p/Al; Machining; Conventional; Wear mechanism; Nonconventional; Performance

Cite this article

Ji-Peng Chen , Lin Gu , Guo-Jian He . A review on conventional and nonconventional machining of SiC particle-reinforced aluminium matrix composites[J]. Advances in Manufacturing, 2020 , 8(3) : 279 -315 . DOI: 10.1007/s40436-020-00313-2

References

1. Nicholls CJ, Boswell B, Davies IJ et al (2017) Review of machining metal matrix composites. Int J Adv Manuf Technol 90:2429-2441
2. Sidhu SS, Batish A, Kumar S (2013) Fabrication and electrical discharge machining of metal-matrix composites:a review. J Reinf Plast Compos 32(17):1310-1320
3. Benal MM, Shivanand HK (2006) Influence of heat treatment on the coefficient of thermal expansion of Al (6061) based hybrid composites. Mater Sci Eng A 435/436(6):745-749
4. Mishra AK, Srivastava RK (2017) Wear behaviour of Al-6061/SiC metal matrix composites. J Inst Eng 98(2):97-103
5. Reddy AP, Krishna PV, Rao RN (2017) Al/SiC NP and Al/SiC NP/X nanocomposites fabrication and properties:a review. Proc Inst Mech Eng Part N J Nanomater Nanoeng Nanosyst 231(4):155-172
6. Xiang J, Pang S, Xie L et al (2018) Investigation of cutting forces, surface integrity, and tool wear when high-speed milling of high-volume fraction SiC_p/Al6063 composites in PCD tooling. Int J Adv Manuf Technol 98(5/8):1237-1251
7. Tailor S, Mohanty R, Soni P et al (2016) Wear behavior of plasma sprayed nanostructured Al-SiC composite coatings:a comparative study. Trans Indian Inst Met 69(6):1179-1191
8. Bushlya V, Lenrick F, Gutnichenko O et al (2017) Performance and wear mechanisms of novel superhard diamond and boron nitride based tools in machining Al-SiC_p metal matrix composite. Wears 376/377:152-164
9. Bains PS, Sidhu SS, Payal H (2016) Fabrication and machining of metal matrix composites:a review. Mater Manuf Process 31(5):553-573
10. Chambers AR (1996) The machinability of light alloy MMCs. Compos A Appl Sci Manuf 27(2):143147
11. Zhao W, Gu L, Xu H et al (2013) A novel high efficiency electrical erosion process-blasting erosion arc machining. Procedia CIRP 6:621-625
12. Ramnath BV, Elanchezhian C, Annamalai R et al (2014) Aluminium metal matrix composites-a review. Rev Adv Mater Sci 38(5):55-60
13. Shukla M, Dhakad S, Agarwal P et al (2018) Characteristic behavior of aluminium metal matrix composites:a review. Mater Today Proc 5(2):5830-5836
14. Soltani S, Khosroshahi RA, Mousavian RT et al (2017) Stir casting process for manufacture of Al-SiC composites. Rare Met 36(7):581-590
15. Kainer K (2006) Custom made materials for automotive and aerospace engineering. Metal matrix nanocomposites. Wiley, Weinheim, pp 1-48
16. Muraliraja R, Arunachalam R, Al-Fori I et al (2019) Development of alumina reinforced aluminum metal matrix composite with enhanced compressive strength through squeeze casting process. Proc Inst Mech Eng Part L J Mat Des Appl 233(3):307-314
17. Sarfraz S, Jahanzaib M, Wasim A et al (2017) Investigating the effects of as-casted and in situ heat-treated squeeze casting of Al-3.5% Cu alloy. Int J Adv Manuf Technol 89(9/12):3547-3561
18. Sarfraz MH, Jahanzaib M, Ahmed W et al (2019) Multi-response parametric optimization of squeeze casting process for fabricating Al 6061-SiC composite. Int J Adv Manuf Technol 102(1/4):759-773
19. Kini UA, Sharma S, Jagannath K et al (2015) Characterization study of aluminium 6061 hybrid composite. Int J Chem Mol Nucl Mater Metall Eng 9(6):578-582
20. Falsafi J, Rosochowska M, Jadhav P et al (2017) Lower cost automotive piston from 2124/SiC/25p metal-matrix composite. SAE Int J Engines 10(4):1984-1992
21. Avci U, Temiz S (2017) A new approach to the production of partially graded and laminated composite material composed of SiC-reinforced 7039 Al alloy plates at different rates. Compos B Eng 131:76-81
22. Lee H, Choi JH, Jo MC et al (2018) Effects of strain rate on compressive properties in bimodal 7075 Al-SiC_p composite. Met Mater Int 24(4):894-903
23. Rodrıguez-Castro R, Wetherhold R, Kelestemur M (2002) Microstructure and mechanical behavior of functionally graded Al A359/SiC_p composite. Mater Sci Eng A 323(1/2):445-456
24. Surappa M, Surappa MK (2008) Dry sliding wear of fly ash particle reinforced A356 Al composites. Wear 265(3/4):349-360
25. Chakraborty S, Kar S, Ghosh SK et al (2017) Parametric optimization of electric discharge coating on aluminium-6351 alloy with green compact silicon carbide and copper tool:a Taguchi coupled utility concept approach. Surf Interfaces 7:47-57
26. Murty SN, Rao BN, Kashyap B (2002) On the hot working characteristics of 2124 Al-SiC_p metal matrix composites. Adv Compos Mater 11(2):105-120
27. Karvanis K, Fasnakis D, Maropoulos A et al (2016) Production and mechanical properties of Al-SiC metal matrix composites. IOP Conf Ser Mater Sci Eng 161:012070
28. Min S (2009) Effects of volume fraction of SiC particles on mechanical properties of SiC/Al composites. Trans Nonferrous Met Soc China 19(6):1400-1404
29. Ozben T, Kilickap E, Cakır O (2008) Investigation of mechanical and machinability properties of SiC particle reinforced AlMMC. J Mater Process Technol 198(1/3):220-225
30. Milan M, Bowen P (2004) Tensile and fracture toughness properties of SiC reinforced al alloys:effects of particle size, particle volume fraction, and matrix strength. J Mater Eng Perform 13(6):775-783
31. El-Kady O, Fathy A (2014) Effect of SiC particle size on the physical and mechanical properties of extruded Al matrix nanocomposites. Mater Des (1980-2015) 54:348-353
32. Hong SJ, Kim HM, Huh D et al (2003) Effect of clustering on the mechanical properties of SiC particulate-reinforced aluminum alloy 2024 metal matrix composites. Mater Sci Eng, A 347(1/2):198-204
33. Yan C, Lifeng W, Jianyue R (2008) Multi-functional SiC/Al composites for aerospace applications. Chin J Aeronaut 21(6):578-584
34. Huang Y, Chen G, Wang B et al (2019) Fabrication, microstructure and properties of the mid-fraction SiC particles/6061Al composites using an optimized powder metallurgy technique. Russ J Non-Ferrous Met 60(3):312-318
35. Muthukrishnan N, Murugan M, Rao KP (2008) An investigation on the machinability of Al-SiC metal matrix composites using PCD inserts. Int J Adv Manuf Technol 38(5/6):447-454
36. Das S, Behera R, Majumdar G et al (2007) An experimental investigation on the machinability of powder formed silicon carbide particle reinforced aluminium metal matrix composites. Int J Heat Mass Transf 50(25/26):5054-5064
37. Dabade UA, Joshi SS, Balasubramaniam R et al (2007) Surface finish and integrity of machined surfaces on Al/SiC_p composites. J Mater Process Technol 192/193(1):166-174
38. Ciftci I, Turker M, Seker U (2004) CBN cutting tool wear during machining of particulate reinforced mmcs. Wear 257(9/10):1041-1046
39. Ge Y, Xu J, Yang H (2010) Diamond tools wear and their applicability when ultra-precision turning of SiC_p/2009Al matrix composite. Wear 269(11/12):699-708
40. Chou YK, Liu J (2005) CVD diamond tool performance in metal matrix composite machining. Surf Coat Technol 200(56):1872-1878
41. Xiang J, Xie L, Gao F et al (2018) Diamond tools wear in drilling of SiC_p/Al matrix composites containing copper. Ceram Int 44(5):5341-5351
42. Durante S, Rutelli G, Rabezzana F (1997) Aluminum-based MMC machining with diamond-coated cutting tools. Surf Coat Technol 94:632-640
43. Karabulut S, Karako H (2017) Investigation of surface roughness in the milling of Al7075 and open-cell SiC foam composite and optimization of machining parameters. Neural Comput Appl 28(5):313-327
44. Sahin Y (2005) The effects of various multilayer ceramic coatings on the wear of carbide cutting tools when machining metal matrix composites. Surf Coat Technol 199(1):112-117
45. Errico GE, Calzavarini R (2001) Turning of metal matrix composites. J Mater Process Technol 119(13):257-260
46. Andrewes CJE, Feng HY, Lau WM (2000) Machining of an aluminum/SiC composite using diamond inserts. J Mater Process Technol 102(13):25-29
47. Yousefi R, Kouchakzadeh MA, Rahiminasab J et al (2011) The influence of SiC particles on tool wear in machining of Al/SiC metal matrix composites produced by powder extrusion. Adv Mater Res 325:393-399
48. Manna A, Bhattacharayya B (2005) Influence of machining parameters on the machinability of particulate reinforced Al/SiC MMC. Int J Adv Manuf Technol 25(9/10):850-856
49. Hooper RM, Henshall JL, Klopfer A (1999) The wear of polycrystalline diamond tools used in the cutting of metal matrix composites. Int J Refract Metal Hard Mater 17(13):103-109
50. Malli NA, Aaditya V, Raghavan R (2012) Study and analysis of PCD 1500 and 1600 grade inserts on turning Al 6061 alloy with 15% reinforcement of SiC particles on MMC. Int Proc Comput Sci Inf Technol 31:143-148
51. Klkap E, Akr O, Aksoy M et al (2005) Study of tool wear and surface roughness in machining of homogenised SiC reinforced aluminium metal matrix composite. J Mater Process Technol 164/165(10):862-867
52. Kremer A, Devillez A, Dominiak S et al (2008) Machinability of Al/SiC patriculate metal-matrix composites under dry conditions with CVD diamod-coated cabride tools. Mach Sci Technol 12(2):214-233
53. Karthikeyan R, Ganesan G, Nagarazan RS et al (2001) A critical study on machining of Al/SiC composites. Adv Manuf Process 16(1):47-60
54. Manna A, Bhattacharayya B (2003) A study on machinability of Al/SiC-MMC. J Mater Process Technol 140(1/3):711-716
55. Ciftci I (2009) Cutting tool wear mechanism when machining particulate reinforced MMCs. Technology 12(4):275-282
56. Bhushan RK (2013) Multiresponse optimization of Al alloy-SiC composite machining parameters for minimum tool wear and maximum metal removal rate. J Manuf Sci Eng 135(2):021013
57. Das D, Chaubey AK, Nayak BB et al (2018) Investigation on cutting tool wear in turning Al 7075/SiC_p metal matrix composite. IOP Conf Ser Mater Sci Eng 377:12110
58. Muthukrishnan N, Davim JP (2011) An investigation of the effect of work piece reinforcing percentage on the machinability of Al-SiC metal matrix composites. Free Radic Biol Med 49(1):15-24
59. Duan C, Sun W, Che M et al (2019) Effects of cooling and lubrication conditions on tool wear in turning of Al/SiC_p composite. Int J Adv Manuf Technol 103:1467-1479
60. Kalaichelvi V, Karthikeyan R, Sivakumar D et al (2012) Tool wear classification using fuzzy logic for machining of Al/SiC composite material. Model Numer Simul Mater Sci 2(2):28-36
61. Chavoshi SZ (2011) Tool flank wear prediction in CNC turning of 7075Al alloy SiC composite. Prod Eng Res Dev 5(1):37-47
62. Pramanik A, Zhang LC, Arsecularatne JA (2006) Prediction of cutting forces in machining of metal matrix composites. Int J Mach Tools Manuf 46(14):1795-1803
63. Antnio CAC, Davim JP (2002) Optimal cutting conditions in turning of particulate metal matrix composites based on experiment and a genetic search model. Compos A 33(2):213-219
64. Wang J, Zuo J, Shang Z et al (2019) Modeling of cutting force prediction in machining high-volume SiC_p/Al composites. Appl Math Model 70:1-17
65. Gaitonde VN, Karnik SR, Davim JP (2009) Some studies in metal matrix composites machining using response surface methodology. J Reinf Plast Compos 28(20):2445-2457
66. Krishnamurthy L, Sridhara BK, Abdulbudan D (2011) Comparative study on the machinability aspects of aluminium silicon carbide and aluminium graphite composites. Int J Mach Machinab Mater 10(7/8):137-152
67. Dabade UA, Dapkekar D, Joshi SS (2009) Modeling of chiptool interface friction to predict cutting forces in machining of Al/SiC_p composites. Int J Mach Tools Manuf 49(9):690-700
68. Ramasubramanian K, Arunachalam N, Rao MR (2019) Wear performance of nano-engineered boron doped graded layer CVD diamond coated cutting tool for machining of Al-SiC MMC. Wear 426:1536-1547
69. El-Gallab M, Sklad M (1998) Machining of Al/SiC particulate metal matrix composites:part Ⅱ:workpiece surface integrity. J Mater Process Technol 83(13):277-285
70. Liu H, Wang S, Zong W (2019) Tool rake angle selection in micro-machining of 45 vol.% SiC_p/2024Al based on its brittleplastic properties. J Manuf Process 37:556-562
71. Lin JT, Bhattacharyya D, Ferguson WG (1998) Chip formation in the machining of SiC-particle-reinforced aluminium-matrix composites. Compos Sci Technol 58(2):285-291
72. Hung NP, Yeo SH, Lee KK et al (1998) Chip formation in machining particle-reinforced metal matrix composites. Adv Manuf Process 13(1):85-100
73. Dabade UA, Joshi SS (2009) Analysis of chip formation mechanism in machining of Al/SiC_p metal matrix composites. J Mater Process Technol 209(10):4704-4710
74. Ge YF, Xu JH, Fu YC (2010) Surface generation and chip formation when ultra-precision turning of SiC_p/Al composites. Adv Mater Res 135:282-287
75. Kishawy H, Kannan S, Balazinski M (2004) An energy based analytical force model for orthogonal cutting of metal matrix composites. CIRP Ann 53(1):91-94
76. Dandekar CR, Shin YC (2009) Multi-step 3-D finite element modeling of subsurface damage in machining particulate reinforced metal matrix composites. Compos A Appl Sci Manuf 40(8):1231-1239
77. Duan C, Sun W, Fu C et al (2018) Modeling and simulation of tool-chip interface friction in cutting Al/SiC_p composites based on a three-phase friction model. Int J Mech Sci 142:384-396
78. Wu Q, Xu WX, Zhang LC (2019) Machining of particulatereinforced metal matrix composites:an investigation into the chip formation and subsurface damage. J Mater Process Technol 274:116315
79. Wu Q, Xu W, Zhang L (2018) A micromechanics analysis of the material removal mechanisms in the cutting of ceramic particle reinforced metal matrix composites. Mach Sci Technol 22(4):638-651
80. Wang Y, Liao W, Yang K et al (2019) Simulation and experimental investigation on the cutting mechanism and surface generation in machining SiC_p/Al MMCs. Int J Adv Manuf Technol 100(5/8):1393-1404
81. Guo H, Wang D, Zhou L (2011) FEM prediction of chip morphology during the machining of particulates reinforced Al matrix composites. Adv Mater Res 188:220-223
82. Fathipour M, Hamedi M, Yousefi R (2013) Numerical and experimental analysis of machining of Al (20 vol% SiC) composite by the use of abaqus software. Materialwiss Werkstofftech 44(1):14-20
83. Sandhiya YN, Thamizharasan M, Subramanyam BA et al (2018) Finite element analysis of tool particle interaction, particle volume fraction, size, shape and distribution in machining of A356/SiC_p. Mater Today Proc 5(8):16800-16806
84. Dandekar CR, Shin YC (2012) Modeling of machining of composite materials:a review. Int J Mach Tools Manuf 57:102-121
85. Ge Y, Xu J, Yang H et al (2008) Workpiece surface quality when ultra-precision turning of SiC_p/Al composites. J Mater Process Technol 203(1/3):166-175
86. Davim JP (2002) Diamond tool performance in machining metal matrix composites. J Mater Process Technol 128(13):100-105
87. Pradhan S, Singh G, Bhagi LK (2018) Study on surface roughness in machining of Al/SiC_p metal matrix composite using desirability function analysis approach. Mater Today Proc 5(14):28108-28116
88. Ding X, Liew WYH, Liu XD (2005) Evaluation of machining performance of MMC with PCBN and PCD tools. Wear 259(712):1225-1234
89. Sharma S (2013) Optimization of machining process parameters for surface roughness of Al-composites. J Inst Eng India Ser C 94(4):327-333
90. Davim JP (2003) Design of optimisation of cutting parameters for turning metal matrix composites based on the orthogonal arrays. J Mater Process Technol 132(1):340-344
91. Palanikumar K, Karthikeyan R (2007) Assessment of factors influencing surface roughness on the machining of Al/SiC particulate composites. Mater Des 28(5):1584-1591
92. Muthukrishnan N, Davim JP (2009) Optimization of machining parameters of Al/SiC-MMC with ANOVA and ANN analysis. J Mater Process Technol 209(1):225-232
93. Aurich JC, Zimmermann M, Schindler S et al (2016) Effect of the cutting condition and the reinforcement phase on the thermal load of the workpiece when dry turning aluminum metal matrix composites. Int J Adv Manuf Technol 82(5/8):1317-1334
94. Muthukrishnan N, Murugan M, Rao KP (2008) Machinability issues in turning of Al-SiC (10p) metal matrix composites. Int J Adv Manuf Technol 39(3/4):211-218
95. Ge YF, Xu JH, Yang H et al (2007) Machining induced defects and the influence factors when diamond turning of SiC_p/Al composites. Appl Mech Mater 10/12:626-630
96. Dabade U, Sonawane H, Joshi S (2010) Cutting force and surface roughness in machining Al/SiC composites of varying composition. Mach Sci Technol 14(2):258-279
97. Cheung CF, Chan KC, To S et al (2002) Effect of reinforcement in ultra-precision machining of Al6061/SiC metal matrix composites. Scr Mater 47(2):77-82
98. Wang Y, Liao W, Yang K et al (2019) Investigation on cutting mechanism of SiC_p/Al composites in precision turning. Int J Adv Manuf Technol 100(1/4):963-972
99. Gnay M, Eker U (2011) Evaluation of surface integrity during machining with different tool grades of SiC_p/Al-Si composites produced by powder metallurgy. Mater Sci Forum 672:319-322
100. Muguthu JN, Gao D (2013) Profile fractal dimension and dimensional accuracy analysis in machining metal matrix composites (MMCs). Mater Manuf Process 28(10):1102-1109
101. Bushlya V, Filip Lenric, Gutnichenko O et al (2017) Performance and wear mechanisms of novel superhard diamond and boron nitride based tools in machining Al-SiC_p metal matrix composite. Wear 376/377:152-164
102. Varadarajan YS, Vijayaraghavan L, Krishnamurthy R (2006) Performance enhancement through microwave irradiation of k20 carbide tool machining Al/SiC metal matrix composite. J Mater Process Technol 173(2):185-193
103. Shankar E, John MRS, Thirumurugan M et al (2008) Surface characteristics of Al(SiC)p metal matrix composites by roller burnishing process. Int J Mach Mach Mater 3(3/4):283-292
104. Sadat A (2009) On the quality of machined surface region when turning Al/SiC metal marix composites. Mach Sci Technol 13(3):338-355
105. Aurich JC, Zimmermann M, Schindler S et al (2016) Turning of aluminum metal matrix composites:influence of the reinforcement and the cutting condition on the surface layer of the workpiece. Adv Manuf 4(3):225-236
106. Bansal P, Upadhyay L (2016) Effect of turning parameters on tool wear, surface roughness and metal removal rate of alumina reinforced aluminum composite. Procedia Technology 23:304-310
107. Ramanujam R, Muthukrishnan N, Raju R (2011) Optimization of cutting parameters for turning Al-SiC(10p) MMC using ANOVA and gray relational analysis. Int J Precis Eng Manuf 12(4):651-656
108. Jeyapaul R, Sivasankar S (2011) Optimization and modeling of turning process for aluminium-silicon carbide composite using artificial neural network models. In:IEEE international conference on industrial engineering and engineering management, pp 773-778
109. Bhushan RK, Kumar S, Das S (2012) GA approach for optimization of surface roughness parameters in machining of Al alloy SiC particle composite. J Mater Eng Perform 21(8):1676-1686
110. Shetty R, Pai RB, Rao SS et al (2009) Taguchi's technique in machining of metal matrix composites. J Braz Soc Mech Sci Eng 31(1):12-20
111. Ramanujam R, Raju R, Muthukrishnan N (2010) Taguchi multimachining characteristics optimization in turning of Al-15% SiC_p composites using desirability function analysis. J Stud Manuf 1(2/3):120-125
112. Manna A, Bhattacharyya B (2006) Taguchi method based optimization of cutting tool flank wear during turning of PR-Al/20vol% SiC-MMC. Int J Mach Machinab Mater 1(4):488-499
113. Sahoo AK, Pradhan S (2013) Modeling and optimization of Al/SiC_p MMC machining using Taguchi approach. Measurement 46(9):3064-3072
114. Sahoo A, Pradhan S, Rout A (2013) Development and machinability assessment in turning Al/SiC_p-metal matrix composite with multilayer coated carbide insert using Taguchi and statistical techniques. Arch Civ Mech Eng 13(1):27-35
115. Seeman M, Ganesan G, Karthikeyan R et al (2010) Study on tool wear and surface roughness in machining of particulate aluminum metal matrix composite-response surface methodology approach. Int J Adv Manuf Technol 48(5/8):613-624
116. Palanikumar K, Shanmugam K, Davim JP (2009) Analysis and optimization of cutting parameters for surface roughness in machining Al/SiC particulate composites by PCD tool. Int J Mater Prod Technol 37(1/2):117-128
117. Tamang S, Chandrasekaran M (2015) Modeling and optimization of parameters for minimizing surface roughness and tool wear in turning Al/SiC_p MMC, using conventional and soft computing techniques. Adv Prod Eng Manag 10(2):59-72
118. Joardar H, Das N, Sutradhar G et al (2014) Application of response surface methodology for determining cutting force model in turning of LM6/SiC_p metal matrix composite. Measurement 47:452-464
119. Chandrasekaran M, Tamang S (2014) Desirability analysis and genetic algorithm approaches to optimize single and multi response characteristics in machining Al-SiC_p MMC. Aimtdr, p 653
120. Kumar S, Bhushan RK, Das S (2014) Machining performance of 7075 Al alloy SiC metal matrix composite with HSS and carbide tool. J Manuf Technol Res 5(1/2):17-41
121. Bhushan RK, Kumar S, Das S (2010) Effect of machining parameters on surface roughness and tool wear for 7075 Al alloy SiC composite. Int J Adv Manuf Technol 50(5/8):459-469
122. Kumar R, Chauhan S (2015) Study on surface roughness measurement for turning of Al 7075/10/SiC_p and Al 7075 hybrid composites by using response surface methodology (RSM) and artificial neural networking (ANN). Measurement 65:166-180
123. Bhushan RK (2013) Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites. J Clean Prod 39(1):242-254
124. Mohan B, Venugopal S, Rajadurai A et al (2008) Optimization of the machinability of the Al-SiC metal matrix composite using the dynamic material model. Metall Mater Trans A 39(12):2931-2940
125. Bian R, He N, Li L et al (2014) Precision milling of high volume fraction SiC p/Al composites with monocrystalline diamond end mill. Int J Adv Manuf Technol 71(1/4):411-419
126. ClausB Nestler A, Schubert A (2016) Investigation of surface properties in milling of SiC particle reinforced aluminium matrix composites (AMCs). Procedia CIRP 46:480-483
127. Shen B, Sun FH, Zhang DC (2010) Comparative studies on the cutting performance of HFCVD diamond and DLC coated WCCo milling tools in dry machining Al/SiC-MMC. Adv Mater Res 126:220-225
128. Huang S, Zhou L, Yu X et al (2012) Experimental study of highspeed milling of SiC_p/Al composites with PCD tools. Int J Adv Manuf Technol 62(5/8):487-493
129. Huang S, Guo L, He H et al (2018) Study on characteristics of SiC p/Al composites during high-speed milling with different particle size of PCD tools. Int J Adv Manuf Technol 95(5/8):2269-2279
130. Wang YJ, Pan MQ, Chen T et al (2012) Performance of cutting tools in high speed milling of SiC_p/Al composites. Adv Mater Res 591/593:311-314
131. Huang ST, Zhou L (2011) Evaluation of tool wear when milling SiC p/Al composites. Eng Mater 455:226-231
132. Ge Y, Xu J, Fu Y (2015) Machinability of SiC particle reinforced 2009Al matrix composites when high-speed milling with PCD tools. Int J Mach Mach Mater 17(2):108-126
133. Deng B, Wang H, Peng F et al (2018) Experimental and theoretical investigations on tool wear and surface quality in micro milling of SiC_p/Al composites under dry and MQL conditions. In:ASME 2018 International Mechanical Engineering Congress and Exposition, american society of mechanical Engineers, pp V002T02A001-V002T02A001
134. Karthikeyan R, Raghukandan K, Naagarazan RS et al (2000) Optimizing the milling characteristics of Al-SiC particulate composites. Met Mater 6(6):539-547
135. Ekici E, Samta G, Glesin M (2014) Experimental and statistical investigation of the machinability of Al-10% SiC MMC produced by hot pressing method. Arab J Sci Eng 39(4):3289-3298
136. Jayakumar K, Mathew J, Joseph MA et al (2012) Processing and end milling behavioural study of A356-SiC_p composite. Mater Sci Forum 710:338-343
137. Jayakumar K, Mathew J, Joseph MA (2013) An investigation of cutting force and tool-work interface temperature in milling of Al-SiC_p metal matrix composite. Proc Inst Mech Eng Part B J Eng Manuf 227(3):362-374
138. Vallavi MA, Gandhi NMD, Velmurugan C (2018) Application of genetic algorithm in optimisation of cutting force of Al/SiC_p metal matrix composite in end milling process. Int J Mater Prod Technol 56(3):234-252
139. Huang ST, Yu X, Zhou L (2011) Experimental study and modeling of milling force during high-speed milling of SiC_p/Al composites using regression analysis. Adv Mater Res 188:3-8
140. Babu BG, Selladurai V, Shanmugam R (2008) Analytical modeling of cutting forces of end milling operation on aluminum silicon carbide particulate metal matrix composite material using response surface methodology. J Eng Appl Sci 3(2):195-196
141. Chen X, Xie L, Xue X et al (2017) Research on 3D milling simulation of SiC_p/Al composite based on a phenomenological model. Int J Adv Manuf Technol 92:2715-2723
142. Ge YF, Xu JH, Fu YC (2011) Cutting forces when high-speed milling of SiC_p/Al composites. Adv Mater Res 308:871-876
143. Huang S, Guo L, Yang H et al (2019) Study on characteristics in high-speed milling SiC_p/Al composites with small particles and high volume fraction by adopting PCD cutters with different grain sizes. Int J Adv Manuf Technol 95:1-9
144. Zha H, Feng P, Zhang J et al (2018) Material removal mechanism in rotary ultrasonic machining of high-volume fraction SiC p/Al composites. Int J Adv Manuf Technol 97:1-11
145. Qin S, Cai XJ, Zhang YS et al (2012) Experimental studies on machinability of 14 wt.% of SiC particle reinforced aluminium alloy composites. Mater Sci Forum 723:94-98
146. Reddy NSK, Kwang-Sup S, Yang M (2008) Experimental study of surface integrity during end milling of Al/SiC particulate metal-matrix composites. J Mater Process Technol 201(1-3):574-579
147. Zhang GF, Tan YQ, Zhang B et al (2009) Effect of SiC particles on the machining of aluminum/SiC composite. Mater Sci Forum 626:219-224
148. Liu J, Cheng K, Ding H et al (2019) Realization of ductile regime machining in micro-milling SiC_p/Al composites and selection of cutting parameters. Proc Inst Mech Eng Part C J Mech Eng Sci 233(12):4336-4347
149. Chandrasekaran M (2012) Development of predictive model for surface roughness in end milling of Al-SiC_p metal matrix composites using fuzzy logic. World Acad Sci Eng Technol 6(7):928-933
150. Reddy KS, Vijayaraghavan L (2011) Machining studies on milling of Al/SiC_p composite. Int J Mach Mach Mater 9(1/2):116-130
151. Wang T, Xie L, Wang X (2015) 2D and 3D milled surface roughness of high volume fraction SiC_p/Al composites. Def Technol 11(2):104-109
152. Ghoreishi R, Roohi AH, Ghadikolaei AD (2018) Analysis of the influence of cutting parameters on surface roughness and cutting forces in high speed face milling of Al/SiC MMC. Mater Res Express 5(8):086521
153. Huang S, Guo L, He H et al (2018) Experimental study on SiC_p/Al composites with different volume fractions in high-speed milling with PCD tools. Int J Adv Manuf Technol 97(5/8):2731-2739
154. Wang T, Xie L, Wang X et al (2013) Surface integrity of high speed milling of Al/SiC/65p aluminum matrix composites. Procedia CIRP 8:475-480
155. Arokiadass R, Palaniradja K, Alagumoorthi N (2011) Prediction of flank wear in end milling of particulate metal matrix composite-RSM approach. Int J Appl Eng Res 6(5):559-569
156. Jeyakumar S, Marimuthu K, Ramachandran T (2013) Prediction of cutting force, tool wear and surface roughness of Al6061/SiC composite for end milling operations using RSM. J Mech Sci Technol 27(9):2813-2822
157. Krishna MV, Xavior MA (2015) Experiment and statistical analysis of end milling parameters for Al/SiC using response surface methodology. Int J Eng Technol 7:2274-2285
158. Rajeswari S, Sivasakthivel P (2018) Optimisation of milling parameters with multi-performance characteristic on Al/SiC metal matrix composite using grey-fuzzy logic algorithm. Multidiscip Model Mater Struct 14(2):284-305
159. Sujay P, Sankar BR, Umamaheswarrao P (2018) Experimental investigations on acceleration amplitude in end milling of Al6061-SiC metal matrix composite. Procedia Comput Sci 133:740-745
160. Ge YF, Xu JH, Fu YC (2011) Experimental study on high-speed milling of SiC_p/Al composites. Adv Mater Res 291/294:725-731
161. Wang T, Xie L, Wang X et al (2015) Pcd tool performance in high-speed milling of high volume fraction SiC_p/Al composites. Int J Adv Manuf Technol 78(9/12):1445-1453
162. Tosun G, Muratoglu M (2004) The drilling of an Al/SiC_p metalmatrix composites. Part I:microstructure. Compos Sci Technol 64(2):299-308
163. Haq AN, Marimuthu P, Jeyapaul R (2008) Multi response optimization of machining parameters of drilling Al/SiC metal matrix composite using grey relational analysis in the Taguchi method. Int J Adv Manuf Technol 37(3/4):250-255
164. Monaghan J, O'reilly P (1992) The drilling of an Al/SiC metalmatrix composite. J Mater Process Technol 33(4):469-480
165. Barnes S, Pashby IR, Hashim AB (1999) Effect of heat treatment on the drilling performance of aluminium/SiC MMC. Appl Compos Mater 6(2):121-138
166. Thakre AA, Soni S (2016) Modeling of burr size in drilling of aluminum silicon carbide composites using response surface methodology. Eng Sci Technol Int J 19(3):1199-1205
167. Babu KV, Uthayakumar M, Jappes JTW et al (2015) Optimization of drilling process on Al-SiC composite using grey relation analysis. Int J Manuf Mater Mech Eng 5(4):17-31
168. Tosun G, Muratoglu M (2004) The drilling of Al/SiC_p metalmatrix composites. Part 2:workpiece surface integrity. Compos Sci Technol 64(10/11):1413-1418
169. Calatoru V, Balazinski M, Mayer J et al (2008) Diffusion wear mechanism during high-speed machining of 7475-T7351 aluminum alloy with carbide end mills. Wear 265(11/12):1793-1800
170. Xiang J, Pang S, Xie L et al (2018) Mechanism based FE simulation of tool wear in diamond drilling of SiC_p/Al composites. Materials 11(2):252
171. Huang S, Zhou L, Chen L et al (2012) Drilling of SiC_p/Al metal matrix composites with polycrystalline diamond (PCD) tools. Mater Manuf Process 27(10):1090-1094
172. Hu F, Xie L, Xiang J et al (2018) Finite element modelling study on small-hole peck drilling of SiC_p/Al composites. Int J Adv Manuf Technol 96(9/12):3719-3728
173. Zhou L, Huang S, Xu L et al (2013) Drilling characteristics of SiC p/Al composites with electroplated diamond drills. Int J Adv Manuf Technol 69(5/8):1165-1173
174. Tosun G (2011) Statistical analysis of process parameters in drilling of Al/SiC metal matrix composite. Int J Adv Manuf Technol 55(5/8):477-485
175. Barnes S, Pashby IR (2000) Through-tool coolant drilling of aluminum/SiC metal matrix composite. J Eng Mater Technol 122(4):384-388
176. Somasundaram G, Boopathy SR (2010) Fabrication and friction drilling of aluminum silicon carbide metal matrix composite. In:Frontiers in automobile and mechanical engineering-2010. IEEE, pp 21-26
177. Somasundaram G, Boopathy RS, Palanikumar K (2012) Modeling and analysis of roundness error in friction drilling of aluminum silicon carbide metal matrix composite. J Compos Mater 46(2):169-181
178. Singh S, Singh I, Dvivedi A (2013) Multi objective optimization in drilling of Al6063/10% SiC metal matrix composite based on grey relational analysis. Proc Inst Mech Eng Part B J Eng Manuf 227(12):1767-1776
179. Karthikeyan R, Jaiganesh S, Pai B (2002) Optimization of drilling characteristics for Al/SiC_p composites using fuzzy/GA. Met Mater Int 8(2):163-168
180. Dhavamani C, Alwarsamy T (2012) Optimization of machining parameters for aluminum and silicon carbide composite using genetic algorithm. Procedia Eng 38:1994-2004
181. Singh H, Kamboj A, Kumar S (2014) Multi response optimization in drilling Al6063/SiC/15% metal matrix composite. Int J Chem Nucl Ma

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article

References