Marginal-restraint mandrel-free spinning is an advanced technology for manufacturing ellipsoidal heads with large diameter-thickness ratios. The effects of spinning parameters on the forming accuracy of ellipsoidal heads have been studied, and optimized spinning parameters have been obtained. The microstructure evolution of a workpiece is usually very complicated in the spinning process. In this work, the influence of spinning parameters on the microstructures of two-pass spun ellipsoidal heads is studied. It is found that the forming angle and feed rate of the first pass, angle between passes, and feed rate of the second pass significantly affect the microstructures. Meanwhile, the evolution rule of the microstructures near the inner and outer surfaces of the spun parts is almost consistent. A large forming angle, large angle between passes, or large feed rate of the second pass are beneficial to obtain uniform microstructures. A small or large feed rate of the first pass reduces the microstructure uniformity. To improve the microstructure uniformity between the inner and outer surfaces, the optimized spinning parameters are determined.
The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-020-00322-1
Jia-Yang Chen
,
Yong-Cheng Lin
,
Guo-Dong Pang
,
Xin-He Li
. Effects of spinning parameters on microstructures of ellipsoidal heads during marginal-restraint mandrel-free spinning[J]. Advances in Manufacturing, 2020
, 8(4)
: 457
-472
.
DOI: 10.1007/s40436-020-00322-1
1. Xia QX, Xiao GF, Long H et al (2014) A review of process advancement of novel metal spinning. Int J Mach Tools Manuf 85:100-121
2. Li ZX, Shu XD (2019) Involute curve roller trace design and optimization in multipass conventional spinning based on the forming clearance compensation. J Manuf Sci Eng 141:091007. https://doi.org/10.1115/1.4044007
3. Music O, Allwood JM, Kawai K (2010) A review of the mechanics of metal spinning. J Mater Process Technol 210:3-23
4. Hagan E, Jeswiet J (2003) A review of conventional and modern single-point sheet metal forming methods. Proc Inst Mech Eng Part B-J Eng Manuf 217:213-225
5. Lin YC, Chen JY, He DG et al (2020) Marginal-restraint mandrel-free spinning process for thin-walled ellipsoidal heads. Adv Manuf 8:189-203
6. Zhang HR, Zhan M, Guo J et al (2019) Forming the transverse inner rib of a curved generatrix part through power spinning. Adv Manuf 7:105-115
7. Han ZR, Fan ZJ, Xiao Y et al (2017) A research on thickness distribution of oblique cone in dieless shear spinning. Int J Adv Manuf Technol 90:2901-2912
8. Lin YC, Wu Q, He DG et al (2020) Effects of solution time and cooling rate on microstructures and mechanical properties of 2219 Al alloy for a larger spun thin-wall ellipsoidal head. J Mater Res Technol 9(3):3566-3577
9. Kawai K, Yang LN, Kudo H (2007) A flexible shear spinning of axi-symmetrical shells with a general-purpose mandrel. J Mater Process Technol 192:13-17
10. Chen DD, Lin YC, Chen XM (2019) A strategy to control microstructures of a Ni-based superalloy during hot forging based on particle swarm optimization algorithm. Adv Manuf 7:238-247
11. Guo H, Wang J, Lu GD et al (2017) A study of multi-pass scheduling methods for die-less spinning. J Zhejiang Univ-Sci A 18(6):413-429
12. Lin YC, Qian SS, Chen XM et al (2020) Influences of feed rate and wall thickness reduction on the microstructures of thin-walled Hastelloy C-276 cylindrical parts during staggered spinning. Int J Adv Manuf Technol 106:3809-3821
13. Pang GD, Lin YC, Jiang YQ et al (2020) Precipitation behaviors and orientation evolution mechanisms of a phases in Ti-55511 titanium alloy during heat treatment and subsequent hot deformation. Mater Charact 167:110471. https://doi.org/10.1016/j.matchar.2020.110471
14. Zhu XH, Lin YC, Wu Q et al (2020) Effects of aging on precipitation behavior and mechanical properties of a tensile deformed Al-Cu alloy. J Alloys Compd 843:155975. https://doi.org/10.1016/j.jallcom.2020.155975
15. Lin YC, Qian SS, Chen XM et al (2019) Staggered spinning of thin-walled Hastelloy C-276 cylindrical parts:numerical simulation and experimental investigation. Thin Wall Struct 140:466-476
16. Wang J, Liu D, Yang Y (2016) Mechanisms of non-uniform microstructure evolution in GH4169 alloy during heating process. Acta Metall Sin 52:707-716
17. Xu WC, Zhao XK, Shan DB et al (2016) Numerical simulation and experimental study on multi-pass staggered spinning of internally toothed gear using plate blank. J Mater Process Technol 229:450-466
18. Wu HX, Xu WC, Shan DB et al (2019) An extended GTN model for low stress triaxiality and application in spinning forming. J Mater Process Technol 263:112-128
19. Zhan M, Zhang T, Yang H et al (2016) Establishment of a thermal damage model for Ti-6Al-2Zr-1Mo-1V titanium alloy and its application in the tube rolling-spinning process. Int J Adv Manuf Technol 87:1345-1357
20. Xiao GF, Zhu NY, Long JC et al (2018) Research on precise control of microstructure and mechanical properties of Ni-based superalloy cylindrical parts during hot backward flow spinning. J Mater Process Technol 34:140-147
21. Guo XZ, Li B, Jin K et al (2017) A simulation and experiment study on paraxial spinning of Ni-based superalloy tube. Int J Adv Manuf Technol 93:4399-4407
22. Hui J, Feng Z, Fan WX et al (2018) The influence of power spinning and annealing temperature on microstructures and properties of Cu-Sn alloy. Mater Charact 144:611-620
23. Molladavoudi HR, Djavanroodi F (2011) Experimental study of thickness reduction effects on mechanical properties and spinning accuracy of aluminum 7075-O, during flow forming. Int J Adv Manuf Technol 52:949-957
24. Huang CQ, Liu JX (2020) Effects of hot spinning and heat treatment on the microstructure, texture, and mechanical properties of A356 wheel hubs. Metall and Mat Trans A 51:289-298
25. Xiao GF, Xia QX, Cheng XQ et al (2016) New forming method of manufacturing cylindrical parts with nano/ultrafine grained structures by power spinning based on small plastic strains. Sci China Tech Sci 59:1656-1665
26. Cao Z, Wang FH, Wan Q et al (2015) Microstructure and mechanical properties of AZ80 magnesium alloy tube fabricated by hot flow forming. Mater Des 67:64-71
27. Lossen B, Andreiev A, Stolbchenko M et al (2018) Frictionspinning-grain structure modification and the impact on stress/strain behavior. J Mater Process Technol 261:242-250
28. Radović L, Nikačević M, Jordović B (2012) Deformation behaviour and microstructure evolution of AlMg6Mn alloy during shear spinning. Trans Nonferrous Met Soc China 22:991-1000
29. Zoghi H, Arezoodar AF, Sayeaftabi M (2012) Effect of feed and roller contact start point on strain and residual stress distribution in dome forming of steel tube by spinning at an elevated temperature. Proc Inst Mech Eng Part B:J Eng Manuf 226:1880-1890
30. Long JC, Zhu NY, Xia QX et al (2019) A study of the dynamic recrystallization behavior of Ni-based superalloy during hot power spinning based on cellular automaton. Adv Eng Mater 21:1801022. https://doi.org/10.1002/adem.201801022
31. Wu Y, Kou HC, Tang B et al (2018) O phase precipitation and variant selection in Ti-22Al-25Nb alloy during the hot shear spinning. Adv Eng Mater 20:1800153. https://doi.org/10.1002/adem.201800153
32. Xia QX, Long JC, Zhu NY et al (2019) Research on the microstructure evolution of Ni-based superalloy cylindrical parts during hot power spinning. Adv Manuf 7(1):52-63
33. Mori KI, Ishiguro M, Isomura Y (2009) Hot shear spinning of cast aluminium alloy parts. J Mater Process Technol 209:3621-3627
34. Rao GJ, Li XH, Zhou L et al (2018) A multi-constraint spinning process of ellipsoidal heads. Int J Adv Manuf Technol 94:1505-1512
35. Chen MS, Zou ZH, Lin YC et al (2019) Microstructural evolution and grain refinement mechanisms of a Ni-based superalloy during a two-stage annealing treatment. Mater Charact 151:445-456
36. Gorard S (2005) Revisiting a 90-year-old debate:the advantages of the mean deviation. Brit J Educ Stud 53(4):417-430
