As one of the indispensable actuating components in micro-systems, the shafted microgear is in great production demand. Microforming is a manufacturing process to produce microgears to meet the needs. Due to the small geometrical size, there are uncertain process performance and product quality issues in this production process. In this study, the shafted microgears were fabricated in two different scaling factors with four grain sizes using a progressively extrusion-blanking method. To explore the unknown of the process, grain-based modeling was proposed and employed to simulate the entire forming process. The results show that when the grains are large, the anisotropy of single grains has an obvious size effect on the forming behavior and process performance; and the produced geometries and surface quality are worsened; and the deformation load is decreased. Five deformation zones were identified in the microstructures with different hardness and distributions of stress and strain. The simulation by using the proposed model successfully predicted the formation of zones and revealed the inhomogeneous deformation in the forming process. The undesirable geometries of microgears including material unfilling, burr and inclination were observed on the shaft and teeth of gear, and the inclination size is increased obviously with grain size. To avoid the formation of inclination and material unfilling, the punch was redesigned, and a die insert was added to constraint the bottom surface of the gear teeth. The new products had then the better forming quality.
The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-022-00414-0
Jun-Yuan Zheng
,
Hui Liu
,
Ming-Wang Fu
. Size effects on process performance and product quality in progressive microforming of shafted gears revealed by experiment and numerical modeling[J]. Advances in Manufacturing, 2023
, 11(1)
: 1
-20
.
DOI: 10.1007/s40436-022-00414-0
1. Geiger M, Kleiner M, Eckstein R et al (2001) Microforming. CIRP Ann 50(2):445-446
2. Fu MW, Wang JL (2021) Size effects in multi-scale materials processing and manufacturing. Int J Mach Tool Manuf 167:103755. https://doi.org/10.1016/j.ijmachtools.2021.103755
3. Ngo TD, Kashani A, Imbalzano G et al (2018) Additive manufacturing (3D printing):a review of materials, methods, applications and challenges. Compos B Eng 143:172-196
4. Joe HE, Kang EG, Martin B (2018) A review of state of the art of electron beam and ion beam machining. J Korean Soc Precis Eng 35(3):241-252
5. Geng X, Chi G, Wang Y et al (2014) Study on microrotating structure using microwire electrical discharge machining. Mater Manuf Process 29(3):274-280
6. Faisal N, Zindani D, Kumar K et al (2019) Laser micromachining of engineering materials-a review. In:Kumar K, Zindani D, Kumari N et al (eds) Micro and nano machining of engineering materials:recent developments, Springer, Cham, pp 121-136
7. Yuan J, Lyu B, Hang W et al (2017) Review on the progress of ultra-precision machining technologies. Front Mech Eng 12(2):158-180
8. Engel U, Eckstein R (2002) Microforming-from basic research to its realization. J Mater Process Technol 125:35-44
9. Cao J, Brinksmeier E, Fu M et al (2019) Manufacturing of advanced smart tooling for metal forming. CIRP Ann 68(2):605-628
10. Ghassemali E, Tan MJ, Jarfors AE et al (2013) Progressive microforming process:towards the mass production of micro-parts using sheet metal. Int J Adv Manuf Technol 66(5/8):611-621
11. Zheng JY, Yang HP, Fu MW et al (2019) Study on size effect affected progressive microforming of conical flanged parts directly using sheet metals. J Mater Process Tech 272:72-86
12. Zheng JY, Wang J, Fu MW (2021) Experimental and numerical study of the size effect on compound meso/microforming behaviors and performances for making bulk parts by directly using sheet metals. J Manuf Process 66:506-520
13. Zheng JY, Shi SQ, Fu MW (2020) Progressive microforming of pin-shaped plunger parts and the grain size effect on its forming quality. Mater Des 187:108386. https://doi.org/10.1016/j.matdes.2019.108386
14. Chan WL, Fu MW, Lu J et al (2010) Modeling of grain size effect on micro deformation behavior in micro-forming of pure copper. Mater Sci Eng A 527(24):6638-6648
15. Chan WL, Fu MW (2012) Experimental and simulation based study on micro-scaled sheet metal deformation behavior in microembossing process. Mat Sci Eng A Struct 556:60-67
16. Wang JL, Fu MW, Shi SQ (2017) Influences of size effect and stress condition on ductile fracture behavior in micro-scaled plastic deformation. Mater Des 131:69-80
17. Choudhury IA, Shirley S (2010) Laser cutting of polymeric materials:an experimental investigation. Opt Laser Technol 42(3):503-508
18. Chen CC (2015) Grain-size effect on the forging formability of mini gears. Int J Adv Manuf Tech 79(5/8):863-871
19. Debin S, Jie X, Chunju W et al (2008) Hybrid forging processes of micro-double gear using micro-forming technology. Int J Adv Manuf Technol 44(3/4):238-243
20. Tay BY, Loh NH, Tor SB et al (2009) Characterisation of micro gears produced by micro powder injection moulding. Powder Technol 188(3):179-182
21. Liu L, Ni XL, Yin HQ et al (2015) Mouldability of various zirconia micro gears in micro powder injection moulding. J Eur Ceram Soc 35(1):171-177
22. Dong X, Chen F, Chen S et al (2015) Microstructure and microhardness of hot extruded 7075 aluminum alloy micro-gear. J Mater Process Tech 219:199-208
23. Li J, Liu H, Shen Z et al (2016) Formability of micro-gears fabrication in laser dynamic flexible punching. J Mater Process Tech 234:131-142
24. Vollertsen F, Asghari Ganji A, Bakhshi-Jooybari M et al (2018) Forming of micro gears by compressing a pure copper sheet through its thickness. MATEC Web of Conferences 190:10004. https://doi.org/10.1051/matecconf/201819010004
25. Wang Y, Chen X, Wang Z et al (2018) Fabrication of micro gear with intact tooth profile by micro wire electrical discharge machining. J Mater Process Technol 252:137-147
26. Lai X, Peng L, Hu P et al (2008) Material behavior modelling in micro/meso-scale forming process with considering size/scale effects. Comput Mater Sci 43(4):1003-1009
27. Peng L, Lai X, Lee HJ et al (2009) Analysis of micro/mesoscale sheet forming process with uniform size dependent material constitutive model. Mater Sci Eng A 526(1/2):93-99
28. Armstrong RW (2014) Engineering science aspects of the Hall-Petch relation. Acta Mech 225(4/5):1013-1028
29. Nabarro FRN (1966) Extended dislocations and the schmid law of resolved shear stress. Philos Mag 14(130):861-866
30. Zhang P, Karimpour M, Balint D et al (2012) A controlled poisson voronoi tessellation for grain and cohesive boundary generation applied to crystal plasticity analysis. Comput Mater Sci 64:84-89
31. Wang JL, Fu MW, Ran JQ (2014) Analysis of size effect on flow-induced defect in micro-scaled forming process. Int J Adv Manuf Technol 73(9/12):1475-1484
32. Fu MW, Chan WL (2013) A review on the state-of-the-art microforming technologies. Int J Adv Manuf Technol 67(9/12):2411-2437
33. Meng B, Fu MW, Fu CM et al (2015) Ductile fracture and deformation behavior in progressive microforming. Mater Design 83:14-25
