As more and more composite materials are used in lightweight vehicle white bodies, self-pierce riveting (SPR) technology has attracted great attention. However, the existing riveting tools still have the disadvantages of low efficiency and flexibility. To improve these disadvantages and the riveting qualification rate, this paper improves the control scheme of the existing riveting tools, and proposes a novel controller design approach of the flexible servo riveting system based on the RBF network and SPR process. Firstly, this paper briefly introduces the working principle and SPR procedure of the servo riveting tool. Then a moving component force analysis is performed, which lays the foundation for the motion control. Secondly, the riveting quality inspection rules of traditional riveting tools are used for reference to plan the force-displacement curve autonomously. To control this process, the riveting force is fed back into the closed-loop control of the riveting tool and the riveting speed is computed based on the admittance control algorithm. Then, this paper adopts the permanent magnet synchronous motor (PMSM) as the power of riveting tool, and proposes an integral sliding mode control approach based on the improved reaching law and the radial basis function (RBF) network friction compensation for the PMSM speed control. Finally, the proposed control approach is simulated by Matlab, and is applied to the servo riveting system designed by our laboratory. The simulation and riveting results show the feasibility of the designed controller.
The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-022-00403-3
Yan Liu
,
Qiu Tang
,
Xin-Cheng Tian
,
Long Cui
. Flexible servo riveting system control strategy based on the RBF network and self-pierce riveting process[J]. Advances in Manufacturing, 2023
, 11(1)
: 39
-55
.
DOI: 10.1007/s40436-022-00403-3
1. Wang TT, Wagner J (2017) Advanced engine cooling system subjected to ram air effect-nonlinear adaptive multiple input and multiple output (NAMIMO) control. IEEE Trans Veh Technol 66(9):7730-7740
2. Briskham P, Blundell N, Han L et al (2006) Comparison of self-pierce riveting, resistance spot welding and spot friction joining for aluminium automotive sheet. SAE Tech Paper Ser. https://doi.org/10.4271/2006-01-0774
3. Han L, Thornton M, Shergold M (2010) A comparison of the mechanical behaviour of self-piercing riveted and resistance spot welded aluminium sheets for the automotive industry. Mater Des 31(3):1457-1467
4. He X, Pearson I, Young K (2008) Self-pierce riveting for sheet materials:state of the art. J Mater Process Technol 199(1):27-36
5. Jiang H, Liao Y, Gao S et al (2021) Comparative study on joining quality of electromagnetic driven self-piecing riveting, adhesive and hybrid joints for Al/steel structure. Thin Wall Struct 164:107903. https://doi.org/10.1016/j.tws.2021.107903
6. Mori K, Abe Y, Kato T (2014) Self-pierce riveting of multiple steel and aluminium alloy sheets. J Mater Process Technol 214(10):2002-2008
7. Han L, Chrysanthou A, Young KW (2007) Mechanical behaviour of self-piercing riveted multi-layer joints under different specimen configurations. Mater Des 28(7):2024-2033
8. Jiang H, Liao Y, Jing L et al (2021) Mechanical properties and corrosion behavior of galvanized steel/Al dissimilar joints. Arch Civil Mech Eng 21(4):168. https://doi.org/10.1007/s43452-021-00320-5
9. Zhang X, He X, Xing B et al (2020) Quasi-static and fatigue characteristics of self-piercing riveted joints in dissimilar aluminium-lithium alloy and titanium sheets. J Market Res 9(3):5699-5711
10. Haque R (2018) Quality of self-piercing riveting (SPR) joints from cross-sectional perspective:a review. Arch Civil Mech Eng 18(1):83-93
11. Hou W, Mangialardi E, Hu SJ et al (2004) Characterization for quality monitoring of a self-piercing riveting process. In:Proceedings of the sheet metal welding conference XI, Sterling Heights, Michigan, 11-14 May
12. Haque R, Durandet Y (2017) Investigation of self-pierce riveting (SPR) process data and specific joining events. J Manuf Process 30:148-160
13. Oh S, Kim HK, Jeong TE et al (2020) Deep-learning-based predictive architectures for self-piercing riveting process. IEEE Access 8:116254-116267
14. Liu Y, Li H, Zhao H et al (2019) Effects of the die parameters on the self-piercing riveting process. Int J Adv Manuf Technol 105(7/8):3353-3368
15. Jiang H, Gao S, Li G et al (2019) Structural design of half hollow rivet for electromagnetic self-piercing riveting process of dissimilar materials. Mater Des 183:108141. https://doi.org/10.1016/j.matdes.2019.108141
16. Zhao H, Han L, Liu Y et al (2021) Modelling and interaction analysis of the self-pierce riveting process using regression analysis and FEA. Int J Adv Manuf Technol 113(1/2):159-176
17. Choi HH, Vu NTT, Jung JW (2011) Digital implementation of an adaptive speed regulator for a PMSM. IEEE Trans Power Electron 26(1):3-8
18. Sun L, Zhang X, Sun L et al (2013) Nonlinear speed control for PMSM system using sliding-mode control and disturbance compensation techniques. IEEE Trans Power Electron 28(3):1358-1365
19. Piegl L, Tiller W (2003) The NURBS book, 2nd edn. Springer, Berlin
20. Deb K, Pratap A, Agarwal S et al (2002) A fast and elitist multiobjective genetic algorithm:NSGA-II. IEEE Trans Evol Comput 6(2):182-197
21. Amar J, Nagase K (2021) Genetic-algorithm-based global design optimization of tree-type robotic systems involving exponential coordinates. Mech Syst Signal Process 156:107461. https://doi.org/10.1016/j.ymssp.2020.107461
22. Qiao Y, Zhao J, Feng X (2019) A compact integrated RBF method for time fractional convection-diffusion-reaction equations. Comput Math Appl 77(9):2263-2278
23. Han Z, Qian X, Huang H et al (2021) Efficient design of multicolumn RBF networks. Neurocomputing 450:253-263
24. Calanca A, Muradore R, Fiorini P (2016) A review of algorithms for compliant control of stiff and fixed-compliance robots. IEEE/ASME Trans Mechatron 21(2):613-624
25. Gan YH, Duan JJ, Dai XZ (2019) Adaptive variable impedance control for robot force tracking in unstructured environment. Control Decis 34(10):2134-2142
