Low-temperature silicon nitride (SiNx) films deposited by plasma-enhanced chemical vapor deposition (PECVD) have huge application potential in the flexible display. However, the applicability of SiNx largely depends on the film’s general properties, including flexibility, deposition rate, residual stress, elastic modulus, fracture strain, dielectric constant, refraction index, etc. Process optimization towards specific application by conventional experiment design needs lots of work due to the interaction of muti quality and process parameters. Therefore, an efficient global optimization approach for the process technology was proposed based on the Taguchi orthogonal experiment method considering muti-factor muti-responses. First of all, the Taguchi orthogonal experiment design and analysis was used to rank the influences of main process parameters on the quality characteristics, including radio frequency (RF) power, pressure, silane flow rate, ammonia flow rate and nitrogen flow rate. Then, the global optimization approach was carried out utilizing the multi-response optimizer considering the combination target of film formation rate, residual stress, dielectric constant, elastic modulus, fracture strain, refractive index. Finally, the optimal solution of the SiNx film was finally obtained and verified.
The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-022-00423-z
Lian-Qiao Yang
,
Chi Zhang
,
Wen-Lei Li
,
Guo-He Liu
,
Majiaqi Wu
,
Jin-Qiang Liu
,
Jian-Hua Zhang
. Global optimization of process parameters for low-temperature SiNx based on orthogonal experiments[J]. Advances in Manufacturing, 2023
, 11(2)
: 181
-190
.
DOI: 10.1007/s40436-022-00423-z
1. Duerinckx F, Szlufcik J (2002) Defect passivation of industrial multicrystalline solar cells based on PECVD silicon nitride. Sol Energy Mater Sol Cells 72:231–246
2. Leterrier Y, Mottet A, Bouquet N et al (2010) Mechanical integrity of thin inorganic coatings on polymer substrates under quasi-static, thermal and fatigue loadings. Thin Solid Films 519:1729–1737
3. Liu S, Li X, Zhu P et al (2018) P-10.2: The influences of PECVD deposition SiNx on the thin film encapsulation performance. SID Sympos Digest Tech Pap 49:706–708
4. Steinmann V, Moro L (2018) Encapsulation requirements to enable stable organic ultra-thin and stretchable devices. J Mater Res 33:1925–1936
5. Lim KY, Kim HH, Noh JH et al (2022) Thin film encapsulation for quantum dot light-emitting diodes using a-SiNx:H/SiOxNy/hybrid SiOx barriers. RSC Adv 12:4113–4119
6. Lee S, Han JH, Lee SH et al (2018) Review of organic/inorganic thin film encapsulation by atomic layer deposition for a flexible OLED display. JOM 71:197–211
7. Cho TY, Lee WJ, Lee SJ et al (2018) Moisture barrier and bending properties of silicon nitride films prepared by roll-to-roll plasma enhanced chemical vapor deposition. Thin Solid Films 660:101–107
8. Yun SJ, Abidov A, Kim S et al (2018) Water vapor transmission rate property of SiNx thin films prepared by low temperature (<100 ℃) linear plasma enhanced chemical vapor deposition. Vacuum 148:33–40
9. Wu S (2018) The realization of the optimization of silicon nitride technology in PECVD system. Dissertation, University of Electronic Science and Technology of China
10. Jing Y, Zhong C (2014) Effect of hydrogen addition on the optical and electronic properties of silicon nitride deposited by SiH4/N2/Ar plasma. Mater Rep 28:9–13
11. Engelhardt J, Hahn G, Terheiden B (2015) Multifunctional ICP-PECVD silicon nitride layers for high-efficiency silicon solar cell applications. Energy Procedia 77:786–790
12. Chen TN, Wuu DS, Wu CC et al (2006) High-performance transparent barrier films of SiO x∕SiN x stacks on flexible polymer substrates. J Electrochem Soc 153:F244. https://doi.org/10.1149/1.2335592
13. Yu JL, Wang HJ, Zeng H et al (2008) Investigation on gel casting preparation of porous Si3N4 ceramics through orthogonal experimental design. Mater Sci Forum 569:49–52
14. Cao L, Wang Z, Yin Z et al (2018) Investigation on mechanical properties and microstructure of silicon nitride ceramics fabricated by spark plasma sintering. Mater Sci Eng A 731:595–602
15. Wu X, Chu X (2014) Optimization of process parameters for SiNx∶H films deposited by PECVD method through orthogonal experimental design. J Synth Cryst 43:1913–1920
16. Palaniappan SK, Pal SK, Chinnasamy M et al (2022) Multi-response optimization for evaluating output responses in rock cutting through grey-fuzzy-coupled Taguchi technique. Mining Metall Explor 39:1133–1148
17. Chen DY, Tsai CH, Yang WJ et al (2016) Reactive co-sputter deposition and properties of CrAlSiN hard films for enhancement of cutting tools. Int J Refract Met H 58:110–116
18. Mustapha M, Othman EA, Norsal K et al (2013) Carbothermal nitridation process of mechanically milled silica sand using Taguchi’s method. Ceram Int 39:6119–6130
19. Zhang B, Wang J, Tian X et al (2013) Impact force for micro-detonation of striking arc machining of silicon nitrides using the Taguchi method. J Alloy Compd 580:176–181
20. Zhang C, Wu M, Wang P et al (2021) Stability of SiNx prepared by plasma-enhanced chemical vapor deposition at low temperature. Nanomaterials 11(12):3363. https://doi.org/10.3390/nano11123363
21. Liao WS, Lin CH, Lee SC (1994) Oxidation of silicon nitride prepared by plasma-enhanced chemical vapor deposition at low temperature. Appl Phys Lett 65:2229–2231
22. Jehanathan N, Liu Y, Walmsley B et al (2006) Effect of oxidation on the chemical bonding structure of PECVD SiNx thin films. J Appl Phys 100:123516. https://doi.org/10.1063/1.2402581
23. Ghalme S, Mankar A, Bhalerao Y (2017) Integrated Taguchi-simulated annealing (SA) approach for analyzing wear behaviour of silicon nitride. J Appl Res Technol 15:624–632
24. Richetto K, Silva C (2008) Synthesis of silicon nitride using taguchi planning methodology. Mater Sci Forum 591(593):760–765
25. Miao Y, Qian J, Li J et al (2020) Low temperature deposition of high-quality silicon oxynitride (SiON) for OLED encapsulation via conventional PECVD. SID Sympos Digest Tech Pap 51:180–183
26. Liu L, Liu WG, Cao N et al (2013) Study on the performance of PECVD silicon nitride thin films. Def Technol 9:121–126
27. Jang BE, Hong SJ (2018) Spectroscopic analysis of film stress mechanism in PECVD silicon nitride. Trans Electr Electron Mater 19:1–6
28. Ay F, Aydinli A (2004) Comparative investigation of hydrogen bonding in silicon based PECVD grown dielectrics for optical waveguides. Opt Mater 26:33–46
29. Watanabe T, Hori K, Habuka H (2020) Anticorrosive behavior of SiCxNyOz film formed by non-heat assistance plasma-enhanced chemical vapor deposition using monomethylsilane, nitrogen and argon gases. ECS J Solid State Sci 9(2):024001. https://doi.org/10.1149/2162-8777/ab6161
30. Fu Y, Zhang XC, Xuan FZ et al (2013) Multiple cracking of thin films due to residual stress combined with bending stress. Comput Mater Sci 73:113–119
31. Kessels WMM, van Assche FJH, van den Oever PJ et al (2004) The growth kinetics of silicon nitride deposited from the SiH4–N2 reactant mixture in a remote plasma. J Non Cryst Solids 338(340):37–41
32. Nagahori A, Raj R (1995) Electron cyclotron resonance plasma-enhanced metalorganic chemical vapor deposition of tantalum oxide thin films on silicon near room temperature. J Am Ceram Soc 78:1585–1592
33. Sah RE, Rinner F, Baumann H et al (2003) Silicon nitride films deposited using ECR-PECVD technique for coating InGaAlAs high power laser facets. J Electrochem Soc 150:F129. https://doi.org/10.1149/1.1574809
34. Zhang G, Wu A (2009) Deposition rate and surface morphology of silicon nitride thin films. Semicond Optoelectron 30:558–561
35. Kalita K, Ghadai RK, Chakraborty S (2022) Parametric optimization of CVD process for DLC thin film coatings: a comparative analysis. Sādhanā 47:57. https://doi.org/10.1007/s12046-022-01842-1
36. Huang H, Winchester KJ, Suvorova A et al (2006) Effect of deposition conditions on mechanical properties of low-temperature PECVD silicon nitride films. Mat Sci Eng A 435(436):453–459
