In micro electrochemical machining (ECM) processes, stray corrosion causes undesired metal dissolution and the deterioration of shape accuracy. Adopting a sidewall-insulated electrode is an effective approach to suppressing stray corrosion. Most sidewall-insulated electrodes are made of metal substrate and non-metallic thin films. Nevertheless, the thin-film insulating materials attached to a metal substrate are susceptible to damage in an electrolytic environment. This study presents a novel concept of the conductive-material-filled electrode for better sidewallinsulation performance. The micro-scale quartz tube serves as the insulating substrate. Commercially available conductive fillers including metal wire, molten metals, and silver powder are filled inside the working cathode of the quartz tube. Consequently, the metal-wire-filled electrode, moltenmetal-filled electrode, and nano-powder-filled electrode are designed and fabricated. From the verification results of electrode toughness, material removal rate, and surface topography, the metal-wire-filled electrode and moltenmetal-filled electrode exhibit the same performance as a traditional metal-based electrode and much better durability. By contrast, the nano-powder-filled electrode is unable to withstand long-term ECM processes because of the loss of cured powder particles. In ECM experiments, microstructures with steep sidewalls (taper angle <9.7°) were machined using the metal-wire-filled electrode and molten-metal-filled electrode, which could replace the traditional electrode, achieving a longer service life and superior sidewall-insulation performance.
The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-022-00429-7
Guo-Dong Liu
,
Yu-Lan Zhu
,
Sheng-Gui Liu
,
Chao-Jiang Li
. Research on conductive-material-filled electrodes for sidewall insulation performance in micro electrochemical machining[J]. Advances in Manufacturing, 2023
, 11(3)
: 509
-522
.
DOI: 10.1007/s40436-022-00429-7
1. Rajurkar KP, Sundaram MM, Malshe AP (2013) Review of electrochemical and electrodischarge machining. Procedia CIRP 6:13-26
2. Zhan S, Zhao Y (2021) Intentionally-induced dynamic gas film enhances the precision of electrochemical micromachining. J Mater Process Technol 291:117049. https://doi.org/10.1016/j.jmatprotec.2021.117049
3. Wang MH, Tong WJ, Qiu GZ et al (2019) Multiphysics study in air-shielding electrochemical micromachining. J Manuf Process 43:124-135
4. Schuster R, Kirchner V, Allongue P et al (2000) Electrochemical micromachining. Science 289:98-101
5. Kim BH, Na CW, Lee YS et al (2005) Micro electrochemical machining of 3D micro structure using dilute sulfuric acid. CIRP Ann 54:191-194
6. Liu Y, Cai H, Li H (2015) Fabrication of micro spherical electrode by one pulse EDM and their application in electrochemical micromachining. J Manuf Process 17:162-170
7. Ao S, Li K, Liu W et al (2019) Electrochemical micro-machining of high aspect ratio micro-tools with a reverse conical shape tip using electrolyte liquid membrane. Int J Adv Manuf Technol 105:1447-1455
8. Han W, Kunieda M (2017) Fabrication of tungsten micro-rods by ECM using ultra-short-pulse bipolar current. CIRP Ann 66:193-196
9. Mattia B, Wang YQ, Li Z et al (2020) Fabrication of tapered micro rods using twin static wire electrical discharge grinding process. Procedia CIRP 95:499-504
10. Liu G, Li Y, Kong Q et al (2018) Silicon-based tool electrodes for micro electrochemical machining. Precis Eng 52:425-433
11. Hu M, Li Y, Zhang Y et al (2013) Experimental study on micro electrochemical machining with hydrophobic side insulation electrode. Nanotech Precis Eng 11:348-353
12. Hung J, Liu Y, Tsui H et al (2019) Electrode insulation layer for electrochemical machining fabricated through hot-dip aluminizing and microarc oxidation on a stainless-steel substrate. Surf Coat Tech 378:124995. https://doi.org/10.1016/j.surfcoat.2019.124995
13. Li Y, Zheng Y, Yang G et al (2003) Localized electrochemical micromachining with gap control. Sensor Actuat A Phys 108:144-148
14. Li Y, Hu R (2013) Micro electrochemical machining for tapered holes of fuel jet nozzles. Procedia CIRP 6:395-400
15. Rathod V, Doloi B, Bhattacharyya B (2014) Sidewall insulation of microtool for electrochemical micromachining to enhance the machining accuracy. Mater Manuf Process 29:305-313
16. Wang J, Chen W, Gao F et al (2014) A new electrode sidewall insulation method in electrochemical drilling. Int J Adv Manuf Technol 75:21-32
17. Liu G, Li Y, Tong H (2020) Fabrication of silicon electrodes used for micro electrochemical machining. J Micromech Microeng 30:065005. https://doi.org/10.1088/1361-6439/ab82f3
18. Fushimi K, Yanagisawa K, Nakanishi T et al (2013) Microelectrochemistry of dual-phase steel corroding in 0.1 M sulfuric acid. Electrochim Acta 114:83-87
19. Liu G, Tong H, Li Y et al (2020) Multiphysics research on electrochemical machining of micro holes with internal features. Int J Adv Manuf Technol 110:1527-1542
20. Kong Q, Li Y, Liu G et al (2017) Electrochemical machining for micro holes with high aspect ratio on metal alloys using threeelectrode PPS in neutral salt solution. Int J Adv Manuf Technol 93:1903-1913
