Vibration finishing can effectively reduce the surface roughness of blisks and change blade shape accuracy. This study investigates the influence of vibration finishing on the shape accuracy of the blade part of the blisk. The influence of the fixed attitude of the blisk on the position accuracy and profile accuracy of different measuring sections of the blade is analyzed. The changes in the blade geometry before and after vibration finishing are analyzed. The adjustment method of blade disc attitude in the machining process is developed, and the tooling used to fix the blade disc in the vibration finishing is improved. By controlling the deformation in different time periods to offset each other, the contact between the abrasive and the blade edge is reduced, effectively reducing the displacement of the blade section and the excessive wear of the edge.
The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-024-00505-0
Chang-Feng Yao
,
Yun-Qi Sun
,
Liang Tan
,
Min-Chao Cui
,
Ding-Hua Zhang
,
Jun-Xue Ren
. Investigation of control method on blade shape accuracy of blisk in vibration finishing[J]. Advances in Manufacturing, 2025
, 13(2)
: 377
-394
.
DOI: 10.1007/s40436-024-00505-0
[1] Mediratta R, Ahluwalia K, Yeo SH (2016) State-of-the-art on vibratory finishing in the aviation industry: an industrial and academic perspective. Int J Adv Manuf Technol 85:415-429
[2] Shi H, Liu D, Pan Y et al (2021) Effect of shot peening and vibration finishing on the fatigue behavior of TC17 titanium alloy at room and high temperature. Int J Fatigue 151:106391. https://doi.org/10.1016/j.ijfatigue.2021.106391
[3] Wang J, Li X, Li W et al (2023) Convection and motion characteristics of granular media in horizontal vibratory finishing. Granul Matter 25(4):76. https://doi.org/10.1007/s10035-023-01366-3
[4] Wang J, Li X, Li W et al (2023) Research of horizontal vibratory finishing for aero-engine blades: movement characteristics and action behavior of media. Int J Adv Manuf Technol 126:2065-2081
[5] Zhang C, Liu W, Wang S et al (2020) Dynamic modeling and trajectory measurement on vibratory finishing. Int J Adv Manuf Technol 106:253-263
[6] Hashemnia K, Spelt JK (2014) Particle impact velocities in a vibrationally fluidized granular flow: measurements and discrete element predictions. Chem Eng Sci 109:123-135
[7] Mullany B, Shahinian H, Navare J et al (2017) The application of computational fluid dynamics to vibratory finishing processes. CIRP Ann - Manuf Technol 66:309-312
[8] Wang X, Yang S, Li W et al (2018) Vibratory finishing co-simulation based on ADAMS-EDEM with experimental validation. Int J Adv Manuf Technol 96:1175-1185
[9] Baghbanan MR, Yabuki A, Timsit RS et al (2003) Tribological behavior of aluminum alloys in a vibratory finishing process. Wear 255:1369-1379
[10] Yabuki A, Baghbanan MR, Spelt JK (2002) Contact forces and mechanisms in a vibratory finisher. Wear 252:635-643
[11] Fleischhauer E, Azimi F, Tkacik P et al (2016) Application of particle image velocimetry (PIV) to vibrational finishing. J Mater Process Technol 229:322-328
[12] Hao Y, Yang S, Li D et al (2023) Vibratory finishing for the cavity of aero-engine integral casting casing: mechanism analysis and performance evaluation. Int J Adv Manuf Technol 125:713-729
[13] Mitsyk A, Fedorovich V, Kharkiv et al (2022) Micro-roughness in vibration finishing. Cut Tools Technol Syst 97:103-112
[14] Hashimoto F, DeBra DB (1996) Modelling and optimization of vibratory finishing process. CIRP Ann - Manuf Technol 45:303-306
[15] Wan S, Liu YC, Woon KS (2016) A simple general process model for vibratory finishing. Int J Adv Manuf Technol 86:2393-2400
[16] Wan S, Liu Y, Woon KS et al (2014) A material removal and surface roughness evolution model for loose abrasive polishing of free form surfaces. Int J Abras Technol 6:269-285
[17] Walton K, Conroy D, Blunt L (2018) Vibratory finishing, end phase surface topography, resolving current issues. Surf Topogr Metrol Prop 6(4):045002. https://doi.org/10.1088/2051-672X/aae218
[18] Sun Y, Yao C, Tan L et al (2022) Experimental investigation on surface roughness of Ti-17 milling and vibration finishing composite manufacturing. Int J Adv Manuf Technol 121:8019-8038
[19] Uhlmann E, Dethlefs A, Eulitz A (2014) Investigation into a geometry-based model for surface roughness prediction in vibratory finishing processes. Int J Adv Manuf Technol 75:815-823
[20] Makiuchi Y, Hashimoto F, Beaucamp A (2019) Model of material removal in vibratory finishing, based on Preston’s law and discrete element method. CIRP Ann 68:365-368
[21] Cariapa V, Park H, Kim J et al (2008) Development of a metal removal model using spherical ceramic media in a centrifugal disk mass finishing machine. Int J Adv Manuf Technol 39:92-106
[22] Yang F, Chen Z, Meguid SA (2015) Effect of initial surface finish on effectiveness of shot peening treatment using enhanced periodic cell model. Int J Mech Mater Des 11:463-478
[23] Liu YG, Li MQ, Liu HJ (2017) Nanostructure and surface roughness in the processed surface layer of Ti-6Al-4V via shot peening. Mater Charact 123:83-90
[24] Domblesky J, Cariapa V, Evans R (2003) Investigation of vibratory bowl finishing. Int J Prod Res 41:3943-3953
[25] Ciampini D, Papini M, Spelt JK (2007) Impact velocity measurement of media in a vibratory finisher. J Mater Process Technol 183:347-357
[26] Ahluwalia K, Mediratta R, Yeo SH (2016) Experimental investigation of fixtured vibratory finishing. Lect Notes Eng Comput Sci 2224:714-718
