In the traditional machining field, the addition of cutting fluid can appropriately reduce cutting forces, dissipate cutting heat, and facilitate the machining process. However, the use of cutting fluids has environmental implications. Recently, a phenomenon known as organic monolayer embrittlement (OME) has been proposed, which could address this issue. OME can reduce cutting forces, enhance surface quality, and improve machining performance without the need for cutting fluids, particularly noticeable in ductile metals like pure copper. This study conducted micro-cutting experiments on pure copper to investigate the microstructural features, cutting performance, chip flow patterns, and the effectiveness of OME. The results indicate that OME alters chip flow patterns from sinuous flow to segmented quasi-periodic micro-fracture flow, resulting in a 42% and 63% reduction in cutting forces for copper materials with different initial hardness. This phenomenon significantly improves surface quality, diminishes surface defects caused by adhesion, and effectively reduces work hardening layers. The study also demonstrates that OME is a physical phenomenon closely related to the adsorption properties of organic catalytic agents and van der Waals interactions. Materials with higher initial hardness exhibit less pronounced OME due to a sufficiently high grain boundary density, impeding dislocation movement during shear deformation and causing a local stress increase at the free surface of the chip. This leads to a change in chip flow patterns, improving machining performance, analogous to the adsorption effect of organic catalytic agents.
The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-024-00513-0
Chao-Jun Zhang
,
Song-Qing Li
,
Pei-Xuan Zhong
,
Fei-Fan Zhang
,
Wen-Jun Deng
. Cutting performance and effectiveness evaluation on organic monolayer embrittlement in ductile metal precision machining[J]. Advances in Manufacturing, 2025
, 13(2)
: 395
-412
.
DOI: 10.1007/s40436-024-00513-0
[1] Brinksmeier E, Meyer D, Huesmann-Cordes AG et al (2015) Metalworking fluids—mechanisms and performance. CIRP Ann 64(2):605-628
[2] Jun M, Joshi S, DeVor R et al (2008) An experimental evaluation of an atomization-based cutting fluid application system for micromachining. J Manufact Sci Eng 130(3):031118. https://doi.org/10.1115/1.2738961
[3] Kaneeda T, Takatuki S (2000) Lubricant applying effect in ductile metal cutting. Mater Sci Forum 331(337):507-512
[4] Forbes ES (1970) The load-carrying action of organo-sulphur compounds—a review. Wear 15(2):87-96
[5] Lee CM, Choi YH, Ha JH et al (2017) Eco-friendly technology for recycling of cutting fluids and metal chips: a review. Int J Precis Eng Manufact-Green Technol 4(4):457-468
[6] Abbá E, Speidel A, Liao Z et al (2022) A bar of cutting fluid: deep eutectic fluids with a novel flavour. Mater Today Adv 16:100291 https://doi.org/10.1016/j.mtadv.2022.100291
[7] Dilbag S, Rao PV (2008) Performance improvement of hard turning with solid lubricants. Int J Adv Manufact Technol 38(5):529-535
[8] Usui E, Gujral A, Shaw MC (1961) An experimental study of the action of CCl4 in cutting and other processes involving plastic flow. Int J Mach Tool Des Res 1(3):187-197
[9] Yeung H, Viswanathan K, Compton WD et al (2015) Sinuous flow in metals. Proc Natl Acad Sci U S A 112(32):9828-9832
[10] Udupa A, Viswanathan K, Ho Y et al (2017) The cutting of metals via plastic buckling. Proc Math Phys Eng Sci 473(2202):20160863. https://doi.org/10.1098/rspa.2016.0863
[11] Viswanathan K, Udupa A, Yeung H et al (2017) On the stability of plastic flow in cutting of metals. CIRP Ann 66(1):69-72
[12] Udupa A, Viswanathan K, Saei M et al (2018) Material-independent mechanochemical effect in the deformation of highly-strain-hardening metals. Phys Rev Appl 10(1):014009. https://doi.org/10.1103/PhysRevApplied.10.014009
[13] Udupa A, Viswanathan K, Saei M et al (2019) Influencing surface plastic flow in metals using common chemical media. Philos Mag Lett 99(1):1-11
[14] Chaudhari A, Wang H (2019) Effect of surface-active media on chip formation in micromachining. J Mater Process Technol 271:325-335
[15] Sugihara T, Udupa A, Viswanathan K et al (2020) Organic monolayers disrupt plastic flow in metals. Sci Adv 6(51). https://doi.org/10.1126/sciadv.abc8900
[16] Berger R, Delamarche E, Lang HP et al (1998) Surface stress in the self-assembly of alkanethiols on gold probed by a force microscopy technique. Appl Phys A 66(1):S55-S59
[17] Udupa A, Sugihara T, Viswanathan K et al (2021) Surface-stress induced embrittlement of metals. Nano Lett 21(22):9502-9508
[18] Issahaq MN, Udupa A, Sugihara T et al (2022) Enhancing surface quality in cutting of gummy metals using nanoscale organic films. CIRP Ann 71(1):93-96
[19] Rehbinder P (1928) VI s” ezd russkikh fizikov. VI Congress of Russian Physicists), Moscow: OGIZ p 29
[20] Zhao YH, Bingert JF, Topping TD et al (2020) Mechanical behavior, deformation mechanism and microstructure evolutions of ultrafine-grained Al during recovery via annealing. Mater Sci Eng A 772:138706 https://doi.org/10.1016/j.msea.2019.138706
[21] Zhang Y, Lee YJ, Chang S et al (2022) Microstructural modulation of TiAl alloys for controlling ultra-precision machinability. Int J Mach Tool Manu 174:103851. https://doi.org/10.1016/j.ijmachtools.2022.103851
[22] Vyas A, Shaw MC (1999) Mechanics of saw-tooth chip formation in metal cutting. J Manuf Sci Eng 121(2):163-172
[23] Nakayama K (1977) On the formation of “saw-toothed chip” in metal cutting. J Japan Soc Prec Eng 43:117-122
[24] Liang X, Zhang C, Cheung CF et al (2023) Micro/nano incremental material removal mechanisms in high-frequency ultrasonic vibrationassisted cutting of 316L stainless steel. Int J Mach Tool Manu 191:104064. https://doi.org/10.1016/j.ijmachtools.2023.104064
[25] Kou Z, Yang Y, Yang L et al (2018) Deformation twinning in response to cracking in Al: an in situ TEM and molecular dynamics study. Scr Mater 145:28-32
[26] Zhang YW, Wang TC, Tang QH (1995) Brittle and ductile fracture at the atomistic crack tip in copper crystals. Scr Metall Mater 33(2):267-274
[27] Guo T, Chen Y, Cao R et al (2018) Cleavage cracking of ductile metal substrates induced by brittle coating fracture. Acta Mater 152:77-85
[28] Wang B, Liu ZQ (2014) Serrated chip formation mechanism based on mixed mode of ductile fracture and adiabatic shear. Proc Inst Mech Eng B J Eng Manuf 228(2):181-190
[29] Molinari A, Musquar C, Sutter G (2002) Adiabatic shear banding in high speed machining of Ti-6Al-4V: experiments and modeling. Int J Plasticity 18(4):443-459
[30] Burns TJ, Davies MA (2002) On repeated adiabatic shear band formation during high-speed machining. Int J Plasticity 18(4):487-506
[31] Davies MA, Chou Y, Evans CJ (1996) On chip morphology, tool wear and cutting mechanics in finish hard turning. CIRP Ann 45(1):77-82
[32] Molinari A, Soldani X, Miguélez MH (2013) Adiabatic shear banding and scaling laws in chip formation with application to cutting of Ti-6Al-4V. J Mech Phys Solids 61(11):2331-2359
[33] Kim W, Sa Y (2006) Micro-extrusion of ECAP processed magnesium alloy for production of high strength magnesium micro-gears. Scr Mater 54(7):1391-1395
[34] Astakhov VP (2012) 5 - High-pressure supply of metalworking fluids. Astakhov VP, Joksch S (eds) Woodhead publishing series in metals and surface engineering, metalworking fluids (MWFs) for cutting and grinding. Woodhead Publishing. p201-290
[35] Astakhov VP, Shvets S (2004) The assessment of plastic deformation in metal cutting. J Mater Process Tech 146(2):193-202
[36] Yildirim H, Kara A (2013) Effect of van der Waals interactions on the adsorption of olympicene radical on Cu(111): characteristics of weak physisorption versus strong chemisorption. J Phys Chem C 117(6):2893-2902
[37] Lee YJ, Wang H (2020) Current understanding of surface effects in microcutting. Mater Des 192:108688. https://doi.org/10.1016/j.matdes.2020.108688
[38] Jiang J, Britton TB, Wilkinson AJ (2013) Evolution of dislocation density distributions in copper during tensile deformation. Acta Mater 61(19):7227-7239
[39] Liu Y, Cai S (2019) Recrystallization-induced transition from brittle to ductile fracture in severe plastic deformed copper. Mater Sci Eng A 755:116-127
