[1] Hull CW (1986) Apparatus for production of three-dimensional objects by stereolithography. US Patent, Appl 638905
[2] Zhang Q, Guan Y (2023) Application of metal additive manufacturing in oral dentistry. Curr Opin Biomed Eng 25:100441. https://doi.org/10.1016/j.cobme.2022.100441
[3] Zhao N, Parthasarathy M, Patil S et al (2023) Direct additive manufacturing of metal parts for automotive applications. J Manuf Syst 68:368-375. https://doi.org/10.1016/j.jmsy.2023.04.008
[4] Blakey-Milner B, Gradl P, Snedden G et al (2021) Metal additive manufacturing in aerospace: a review. Mater Des 209:110008. https://doi.org/10.1016/j.matdes.2021.110008
[5] Toyserkani E, Sarker D, Obehi IO et al (2021) Metal additive manufacturing. Wiley, Ehsan Toyserkani
[6] Milewski JO (2017) Additive manufacturing of metals. Springer Cham. https://doi.org/10.1007/978-3-319-58205-4
[7] Campbell I, Diegel O, Kowen J et al (2022) Wohlers report 2022. In: additive manufacturing and 3D printing state of the industry. https://wohlersassociates.com/press87.html
[8] (2021) ISO/ASTM 52900:2021 Additive manufacturing—general principles— fundamentals and vocabulary. https://www.iso.org/standard/74514.html
[9] Alves de Campos A, Torres FB, Gonçalves A et al (2024) Empirical estimation of metal powder bed fusion technological improvement rate. Prog Addit Manuf 10(5):3673-3693. https://doi.org/10.1007/s40964-024-00813-8
[10] Kavousi SA, Ozherelkov D, Chernyshikhin S et al (2024) Functionally graded multi-materials by laser powder bed fusion: a review on experimental studies. Prog Addit Manuf 10(4):1843-1912
[11] Liu Y, Zhang J, Niu R et al (2024) Manufacturing of high strength and high conductivity copper with laser powder bed fusion. Nat Commun 15(1):1283. https://doi.org/10.1038/s41467-024-45732-y
[12] Botero C, Sjöström W, Jimenez-Pique E et al (2024) Small-to large-scale electron beam powder bed fusion of functionally graded steels. J Manuf Mater Process 9:7. https://doi.org/10.3390/JMMP9010007
[13] DebRoy T, Wei HL, Zuback JS et al (2018) Additive manufacturing of metallic components —process, structure and properties. Prog Mater Sci 92:112-224. https://doi.org/10.1016/j.pmatsci.2017.10.001
[14] Beaman JJ, Deckard CR (1989) Selective laser sintering with assisted powder handling. US Patent 5053090
[15] Gu DD, Meiners W, Wissenbach K et al (2012) Laser additive manufacturing of metallic components: materials, processes and mechanisms. Int Mater Rev 57:133-164. https://doi.org/10.1179/1743280411Y.0000000014
[16] Alexopoulou VE, Papazoglou EL, Karmiris-Obratański P et al (2022) 3D finite element modeling of selective laser melting for conduction, transition and keyhole modes. J Manuf Process 75:877-894. https://doi.org/10.1016/j.jmapro.2022.01.054
[17] Nandy J, Sarangi H, Sahoo S (2019) A review on direct metal laser sintering: process features and microstructure modeling. Laser Manuf Mater Process 6:280-316. https://doi.org/10.1007/s40516-019-00094-y
[18] Laser metal fusion | TRUMPF. https://www.trumpf.com/en_IN/solutions/applications/additive-manufacturing/laser-metal-fusion/. Accessed 6 May 2022
[19] Sinirlioglu MC (2009) Rapid manufacturing of dental and medical parts via LaserCUSING® technology using titanium and CoCr powder materials. In:US-Turkey workshop on rapid technologies. Istanbul, ASEE
[20] Dixit N, Gandhi C, Aranke O et al (2018) Study of computational analysis and mechanical properties of SS 316L fabricated using LaserCUSING® technology. Mater Today Proc 5:23674-23681. https://doi.org/10.1016/j.matpr.2018.10.157
[21] EBM technology, GE additive. https://www.ge.com/additive/de/node/1030. Accessed 6 May 2022
[22] Cormier D, Harrysson O, Mahale T et al (2007) Freeform fabrication of titanium aluminide via electron beam melting using prealloyed and blended powders. Adv Mater Sci Eng 2007:34737. https://doi.org/10.1155/2007/34737
[23] Gaytan SM, Murr LE, Medina F et al (2009) Advanced metal powder based manufacturing of complex components by electron beam melting. Mater Technol 24:180-190. https://doi.org/10.1179/106678509X12475882446133
[24] Körner C (2016) Additive manufacturing of metallic components by selective electron beam melting — a review. Int Mater Rev 61:361-377. https://doi.org/10.1080/09506608.2016.1176289
[25] Afroz L, Qian M, Forsmark J et al (2024) Fatigue life of laser powder bed fusion (L-PBF) AlSi10Mg alloy: effects of surface roughness and porosity. Prog Addit Manuf 10:2423-2441. https://doi.org/10.1007/s40964-024-00759-x
[26] Hendl J, Zeuner AT, Schettler S et al (2024) Fatigue properties of a Ti-5Al-5Mo-5V-3Cr alloy manufactured by electron beam powder bed fusion. Prog Addit Manuf 10:3615-3627. https://doi.org/10.1007/s40964-024-00824-5
[27] Kladovasilakis N, Charalampous P, Kostavelis I et al (2021) Impact of metal additive manufacturing parameters on the powder bed fusion and direct energy deposition processes: a comprehensive review. Prog Addit Manuf 6:349-365. https://doi.org/10.1007/s40964-021-00180-8
[28] Ali MH, Sabyrov N, Shehab E (2022) Powder bed fusion-laser melting (PBF-LM) process: latest review of materials, process parameter optimization, application, and up-to-date innovative technologies. Prog Addit Manuf 7:1395-1422. https://doi.org/10.1007/S40964-022-00311-9
[29] Fu J, Li H, Song X et al (2022) Multi-scale defects in powder-based additively manufactured metals and alloys. J Mater Sci Technol 122:165-199. https://doi.org/10.1016/J.JMST.2022.02.015
[30] Mostafaei A, Zhao C, He Y et al (2022) Defects and anomalies in powder bed fusion metal additive manufacturing. Curr Opin Solid State Mater Sci 26:100974. https://doi.org/10.1016/J.COSSMS.2021.100974
[31] Snow Z, Nassar AR, Reutzel EW (2020) Review of the formation and impact of flaws in powder bed fusion additive manufacturing. Addit Manuf 36:101457. https://doi.org/10.1016/J.ADDMA.2020.101457
[32] Thompson SM, Bian L, Shamsaei N et al (2015) An overview of direct laser deposition for additive manufacturing; Part I: transport phenomena, modeling and diagnostics. Addit Manuf 8:32-36. https://doi.org/10.1016/j.addma.2015.07.001
[33] Metelkova J, Kinds Y, Kempen K et al (2018) On the influence of laser defocusing in selective laser melting of 316L. Addit Manuf 23:161-169. https://doi.org/10.1016/j.addma.2018.08.006
[34] Patel S, Chen H, Vlasea M et al (2022) The influence of beam focus during laser powder bed fusion of a high reflectivity aluminium alloy — AlSi10Mg. Addit Manuf 59:103112. https://doi.org/10.1016/j.addma.2022.103112
[35] Smith J, Xiong W, Yan W et al (2016) Linking process, structure, property, and performance for metal-based additive manufacturing: computational approaches with experimental support. Comput Mech 57:583-610. https://doi.org/10.1007/s00466-015-1240-4
[36] Huang Y, Fleming TG, Clark SJ et al (2022) Keyhole fluctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing. Nat Commun 13:1170. https://doi.org/10.1038/s41467-022-28694-x
[37] Valadez MBL, Thome P, Lam MC et al (2025) Impact of a typical scanner delay processing parameter on local microstructure in metallic laser-based powder bed fusion. Addit Manuf Lett 13:100273. https://doi.org/10.1016/J.ADDLET.2025.100273
[38] Valadez MBL, Taylor HC, Mireles J et al (2025) User-enabled installation qualification method for laser-based powder bed fusion of metals (PBF-LB/M) machine scanner subsystem. Addit Manuf 100:104694. https://doi.org/10.1016/J.ADDMA.2025.104694
[39] Grünewald J, Blickle V, Allenberg-Rabe M et al (2022) Flexible and highly dynamic beam shaping for laser-based powder bed fusion of metals. Procedia CIRP 111:65-70. https://doi.org/10.1016/J.PROCIR.2022.08.124
[40] Chen Z, Mc Larney B, Rebling J et al (2020) High-speed large-field multifocal illumination fluorescence microscopy. Laser Photon Rev 14:1900070. https://doi.org/10.1002/LPOR.201900070
[41] Ge W, Lin F, Guo C (2015) Microstructure and mechanical property of electron beam selective melting Ti-6Al-4V/Ti-Al structural gradient material. In: 26th annual international symposium on solid freeform fabrication, Austin, Texas
[42] Mehta AK, Gote G, Mittal YG et al (2024) Powder smoking phenomenon in electron beam powder bed fusion: a comprehensive review of prediction, monitoring and mitigation methods. J Manuf Process 127:314-327. https://doi.org/10.1016/J.JMAPRO.2024.07.141
[43] Jiang L, Lan L, Bai C et al (2024) Research progress on powder bed fusion additive manufacturing of TiAl-based alloy. Int J Adv Manuf Tech 133:1045-1061. https://doi.org/10.1007/s00170-024-13843-x
[44] Adomako NK, Haines M, Haghdadi N et al (2024) On the role of the preheat temperature in electron-beam powder bed fusion processed IN718. Addit Manuf Lett 11:100238. https://doi.org/10.1016/J.ADDLET.2024.100238
[45] Shi Y, Gong S, Xu H et al (2023) Electron beam metal additive manufacturing: defects formation and in-process control. J Manuf Process 101:386-431. https://doi.org/10.1016/J.JMAPRO.2023.06.013
[46] Tang HP, Yang GY, Jia WP et al (2015) Additive manufacturing of a high niobium-containing titanium aluminide alloy by selective electron beam melting. Mater Sci Eng A 636:103-107. https://doi.org/10.1016/J.MSEA.2015.03.079
[47] He W, Jia W, Liu H et al (2011) Research on preheating of titanium alloy powder in electron beam melting technology. Rare Met Mater Eng 40:2072-2075. https://doi.org/10.1016/S1875-5372(12)60014-9
[48] Leung CLA, Tosi R, Muzangaza E et al (2019) Effect of preheating on the thermal, microstructural and mechanical properties of selective electron beam melted Ti-6Al-4V components. Mater Des 174:107792. https://doi.org/10.1016/j.matdes.2019.107792
[49] Gong X, Chou K (2013) Characterization of sintered Ti-6Al-4V powders in electron beam additive manufacturing. In: ASME 2013 international manufacturing science and engineering conference collocated with the 41st North American manufacturing research conference, Madison, ASME. https://doi.org/10.1115/MSEC2013-1131
[50] Yan W, Ma W, Shen Y (2020) Powder sintering mechanisms during the pre-heating procedure of electron beam additive manufacturing. Mater Today Commun 25:101579. https://doi.org/10.1016/J.MTCOMM.2020.101579
[51] Antusch S, Klein A, Baumgärtner S et al (2024) Additive manufacturing of novel complex tungsten components via electron beam melting: basic properties and evaluation of the high heat flux behavior. Nucl Mater Energy 39:101683. https://doi.org/10.1016/J.NME.2024.101683
[52] Megahed S, Fischer F, Nell M et al (2022) Manufacturing of pure copper with electron beam melting and the effect of thermal and abrasive post-processing on microstructure and electric conductivity. Mater 16:73. https://doi.org/10.3390/MA16010073
[53] Kenevisi MS, Lin F (2020) Selective electron beam melting of high strength Al2024 alloy; microstructural characterization and mechanical properties. J Alloys Compd 843:155866. https://doi.org/10.1016/J.JALLCOM.2020.155866
[54] Chen H, Wei Q, Zhang Y et al (2019) Powder-spreading mechanisms in powder-bed-based additive manufacturing: experiments and computational modeling. Acta Mater 179:158-171. https://doi.org/10.1016/j.actamat.2019.08.030
[55] Fu Z, Körner C (2022) Actual state-of-the-art of electron beam powder bed fusion. Eur J Mater 2:54-116. https://doi.org/10.1080/26889277.2022.2040342
[56] Milberg J, Sigl M (2008) Electron beam sintering of metal powder. Prod Eng 2:117-122. https://doi.org/10.1007/s11740-008-0088-2
[57] He WW, Jia WP, Liu HY et al (2011) Research on preheating of titanium alloy powder in electron beam melting technology. Rare Metal Mat Eng 40:2072-2075. https://doi.org/10.1016/S1875-5372(12)60014-9
[58] Mudda S, Annamalai AR, Muthuchamy A (2025) Additive manufacturing of pure tungsten and tungsten heavy alloys-state-of-the-art processes. Metals Mater Int 2025:1-32. https://doi.org/10.1007/S12540-024-01861-Z
[59] Cosslett VE, Thomas RN (1965) Multiple scattering of 5-30 keV electrons in evaporated metal films III: Backscattering and absorption. Br J Appl Phys 16:779. https://doi.org/10.1088/0508-3443/16/6/303
[60] Yadollahi A, Shamsaei N, Thompson SM et al (2017) Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel. Int J Fatigue 94:218-235. https://doi.org/10.1016/j.ijfatigue.2016.03.014
[61] Leuders S, Thöne M, Riemer A et al (2013) On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: fatigue resistance and crack growth performance. Int J Fatigue 48:300-307. https://doi.org/10.1016/J.IJFATIGUE.2012.11.011
[62] Wycisk E, Siddique S, Herzog D et al (2015) Fatigue performance of laser additive manufactured Ti-6Al-4V in very high cycle fatigue regime up to 109 cycles. Front Mater 2:72. https://doi.org/10.3389/fmats.2015.00072
[63] Gong H, Rafi K, Gu H et al (2015) Influence of defects on mechanical properties of Ti-6Al-4V components produced by selective laser melting and electron beam melting. Mater Des 86:545-554. https://doi.org/10.1016/J.MATDES.2015.07.147
[64] Zhao L, Song L, Santos MJG et al (2022) Review on the correlation between microstructure and mechanical performance for laser powder bed fusion AlSi10Mg. Addit Manuf 56:102914. https://doi.org/10.1016/J.ADDMA.2022.102914
[65] Sola A, Nouri A (2019) Microstructural porosity in additive manufacturing: the formation and detection of pores in metal parts fabricated by powder bed fusion. J Adv Manuf Process 1(3):e10021. https://doi.org/10.1002/AMP2.10021
[66] Gordon JV, Narra SP, Cunningham RW et al (2020) Defect structure process maps for laser powder bed fusion additive manufacturing. Addit Manuf 36:101552. https://doi.org/10.1016/J.ADDMA.2020.101552
[67] Bitharas I, Parab N, Zhao C et al (2022) The interplay between vapour, liquid, and solid phases in laser powder bed fusion. Nat Commun 13:1-12. https://doi.org/10.1038/s41467-022-30667-z
[68] Gan Z, Kafka OL, Parab N et al (2021) Universal scaling laws of keyhole stability and porosity in 3D printing of metals. Nat Commun 2:1-8. https://doi.org/10.1038/s41467-021-22704-0
[69] Zhang Y, Wu S, Guo Z et al (2025) Defects caused by powder spattering and entrainment in laser powder bed fusion process: high-fidelity modeling of gas, melt pool and powder dynamics. Acta Mater 288:120816. https://doi.org/10.1016/J.ACTAMAT.2025.120816
[70] Khairallah SA, Anderson AT, Rubenchik A et al (2016) Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones. Acta Mater 108:36-45. https://doi.org/10.1016/J.ACTAMAT.2016.02.014
[71] Hojjatzadeh SMH, Parab ND, Yan W et al (2019) Pore elimination mechanisms during 3D printing of metals. Nat Commun 10:3088. https://doi.org/10.1038/s41467-019-10973-9
[72] King WE, Barth HD, Castillo VM et al (2014) Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing. J Mater Process Technol 214:2915-2925. https://doi.org/10.1016/j.jmatprotec.2014.06.005
[73] Narasimharaju SR, Zeng W, See TL et al (2022) A comprehensive review on laser powder bed fusion of steels: processing, microstructure, defects and control methods, mechanical properties, current challenges and future trends. J Manuf Process 75:375-414. https://doi.org/10.1016/J.JMAPRO.2021.12.033
[74] Beretta S, Romano S (2017) A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes. Int J Fatigue 94:178-191. https://doi.org/10.1016/J.IJFATIGUE.2016.06.020
[75] Leung CLA, Marussi S, Towrie M et al (2019) The effect of powder oxidation on defect formation in laser additive manufacturing. Acta Mater 166:294-305. https://doi.org/10.1016/j.actamat.2018.12.027
[76] Huang XK, Tian XY, Zhong Q et al (2020) Real-time process control of powder bed fusion by monitoring dynamic temperature field. Adv Manuf 8:380-391. https://doi.org/10.1007/S40436-020-00317-Y
[77] Stavrou AG, Hare C, Hassanpour A et al (2020) Investigation of powder flowability at low stresses: influence of particle size and size distribution. Powder Technol 364:98-114. https://doi.org/10.1016/J.POWTEC.2020.01.068
[78] Wang L, Liu Y, Chang S (2016) Fabrication of spherical AlSi10Mg powders by radio frequency plasma spheroidization. Metall Mater Trans A 47:2444-2453. https://doi.org/10.1007/s11661-016-3384-z
[79] Martin JH, Barnes JE, Rogers KA et al (2023) Additive manufacturing of a high-performance aluminum alloy from cold mechanically derived non-spherical powder. Commun Mater 4:39. https://doi.org/10.1038/s43246-023-00365-4
[80] Tang M, Pistorius PC (2017) Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting. Int J Fatigue 94:192-201. https://doi.org/10.1016/J.IJFATIGUE.2016.06.002
[81] Guzmán J, de Moura NR, Rodrigues JDL et al (2021) Comparing spherical and irregularly shaped powders in laser powder bed fusion of Nb47Ti alloy. J Mater Eng Perform 30:6557-6567. https://doi.org/10.1007/S11665-021-05916-9
[82] Mussatto A, Groarke R, O’Neill A et al (2021) Influences of powder morphology and spreading parameters on the powder bed topography uniformity in powder bed fusion metal additive manufacturing. Addit Manuf 38:101807. https://doi.org/10.1016/J.ADDMA.2020.101807
[83] Antony LVM, Reddy RG (2003) Processes for production of high-purity metal powders. JOM 55:14-18. https://doi.org/10.1007/s11837-003-0153-4
[84] Chen G, Zhao SY, Tan P et al (2018) A comparative study of Ti-6Al-4V powders for additive manufacturing by gas atomization, plasma rotating electrode process and plasma atomization. Powder Technol 333:38-46. https://doi.org/10.1016/j.powtec.2018.04.013
[85] Anderson IE, White EMH, Dehoff R (2018) Feedstock powder processing research needs for additive manufacturing development. Curr Opin Solid State Mater Sci 22:8-15. https://doi.org/10.1016/j.cossms.2018.01.002
[86] Rabin BH, Smolik GR, Korth GE (1990) Characterization of entrapped gases in rapidly solidified powders. Mater Sci Eng A 124:1-7. https://doi.org/10.1016/0921-5093(90)90328-Z
[87] Tseng KH, Chen PY (2016) Effect of TiO2 crystalline phase on performance of flux assisted GTA welds. Mater Manuf Process 31:359-365. https://doi.org/10.1080/10426914.2015.1058952
[88] Suzuki M, Yamaguchi R, Murakami K et al (2001) Inclusion particle growth during solidification of stainless steel. ISIJ Int 41:247-256. https://doi.org/10.2355/ISIJINTERNATIONAL.41.247
[89] Yin X, Sun YH, Yang YD et al (2016) Inclusion evolution during refining and continuous casting of 316L stainless steel. Ironmak Steelmak 43:533-540. https://doi.org/10.1080/03019233.2015.1125599
[90] Cooper AJ, Dhers J, Sherry AH (2016) Mechanistic studies on type 300 stainless steels manufactured by hot isostatic pressing: the impact of oxygen involvement on fracture behaviour. In: ASME 2016 pressure vessels and piping conference, Vancouver, ASME. https://doi.org/10.1115/PVP2016-63033
[91] Cooper AJ, Cooper NI, Dhers J et al (2016) Effect of oxygen content upon the microstructural and mechanical properties of type 316L austenitic stainless steel manufactured by hot isostatic pressing. Metall Mater Trans A Phys Metall Mater Sci 47:4467-4475. https://doi.org/10.1007/s11661-016-3612-6
[92] Hojo M, Nakao R, Umezaki T et al (1996) Oxide inclusion control in ladle and tundish for producing clean stainless steel. ISIJ Int 36:S128-S131. https://doi.org/10.2355/ISIJINTERNATIONAL.36.SUPPL_S128
[93] Sgobba S, Daniellou T (2003) Effects of thermocapillary forces during welding of 316L-type wrought, cast and powder metallurgy austenitic stainless steels. J Mater Process Technol 143/144:578-583. https://doi.org/10.1016/S0924-0136(03)00373-X
[94] Deng P, Karadge M, Rebak RB et al (2020) The origin and formation of oxygen inclusions in austenitic stainless steels manufactured by laser powder bed fusion. Addit Manuf 35:101334. https://doi.org/10.1016/J.ADDMA.2020.101334
[95] Dopler M (2021) Influence of material properties on spheroidisation of gas atomization process. SSRN Electron J 3785861. https://papers.ssrn.com/sol3/papers.cfm?abstract_id=3785861
[96] Chu F, Zhang K, Shen H et al (2021) Influence of satellite and agglomeration of powder on the processability of AlSi10Mg powder in laser powder bed fusion. Mater Res Technol 11:2059-2073. https://doi.org/10.1016/j.jmrt.2021.02.015
[97] Escano LI, Parab ND, Xiong L et al (2018) Revealing particle-scale powder spreading dynamics in powder-bed-based additive manufacturing process by high-speed X-ray imaging. Sci Rep 8:15079. https://doi.org/10.1038/s41598-018-33376-0
[98] Yim S, Bian H, Aoyagi K et al (2022) Spreading behavior of Ti-48Al-2Cr-2Nb powders in powder bed fusion additive manufacturing process: experimental and discrete element method study. Addit Manuf 49:102489. https://doi.org/10.1016/j.addma.2021.102489
[99] Özbilen S (1999) Satellite formation mechanism in gas atomised powders. Powder Metall 42:70-78. https://doi.org/10.1179/pom.1999.42.1.70
[100] Li X, Zhu Q, Shu S et al (2019) Fine spherical powder production during gas atomization of pressurized melts through melt nozzles with a small inner diameter. Powder Technol 356:759-768. https://doi.org/10.1016/j.powtec.2019.09.023
[101] Lou X, Andresen PL, Rebak RB (2018) Oxide inclusions in laser additive manufactured stainless steel and their effects on impact toughness and stress corrosion cracking behavior. J Nucl Mater 499:182-190. https://doi.org/10.1016/j.jnucmat.2017.11.036
[102] Yan M, Xu W, Dargusch MS et al (2014) Review of effect of oxygen on room temperature ductility of titanium and titanium alloys. Powder Metall 57:251-257. https://doi.org/10.1179/1743290114Y.0000000108
[103] Sadeghi E, Karimi P, Israelsson N et al (2020) Inclusion-induced fatigue crack initiation in powder bed fusion of alloy 718. Addit Manuf 36:101670. https://doi.org/10.1016/j.addma.2020.101670
[104] Voisin T, Calta NP, Khairallah SA et al (2018) Defects-dictated tensile properties of selective laser melted Ti-6Al-4V. Mater Des 158:113-126. https://doi.org/10.1016/J.MATDES.2018.08.004
[105] Wycisk E, Solbach A, Siddique S et al (2014) Effects of defects in laser additive manufactured Ti-6Al-4V on fatigue properties. Phys Procedia 56:371-378. https://doi.org/10.1016/J.PHPRO.2014.08.120
[106] Masuo H, Tanaka Y, Morokoshi S et al (2018) Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing. Int J Fatigue 117:163-179. https://doi.org/10.1016/J.IJFATIGUE.2018.07.020
[107] Chastand V, Quaegebeur P, Maia W et al (2018) Comparative study of fatigue properties of Ti-6Al-4V specimens built by electron beam melting (EBM) and selective laser melting (SLM). Mater Charact 143:76-81. https://doi.org/10.1016/J.MATCHAR.2018.03.028
[108] Galati M, Defanti S, Saboori A et al (2022) An investigation on the processing conditions of Ti-6Al-2Sn-4Zr-2Mo by electron beam powder bed fusion: microstructure, defect distribution, mechanical properties and dimensional accuracy. Addit Manuf 50:102564. https://doi.org/10.1016/j.addma.2021.102564
[109] Larrosa NO, Wang W, Read N et al (2018) Linking microstructure and processing defects to mechanical properties of selectively laser melted AlSi10Mg alloy. Theor Appl Fract Mec 98:123-133. https://doi.org/10.1016/j.tafmec.2018.09.011
[110] Mertens A, Reginster S, Paydas H et al (2014) Mechanical properties of alloy Ti-6Al-4V and of stainless steel 316L processed by selective laser melting: influence of out-of-equilibrium microstructures. Powder Metall 57:184-189. https://doi.org/10.1179/1743290114Y0000000092
[111] Vilaro T, Colin C, Bartout JD (2011) As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting. Metall Mater Trans A Phys Metall Mater Sci 42:3190-3199. https://doi.org/10.1007/S11661-011-0731-Y/FIGURES/9
[112] Kan WH, Chiu LNS, Lim CVS et al (2022) A critical review on the effects of process-induced porosity on the mechanical properties of alloys fabricated by laser powder bed fusion. J Mater Sci 57:9818-9865. https://doi.org/10.1007/S10853-022-06990-7
[113] Mishurova T, Evsevleev S, Piault P et al (2023) Understanding the hot isostatic pressing effectiveness of laser powder bed fusion Ti-6Al-4V by in-situ X-ray imaging and diffraction experiments. Sci Rep 13:18433. https://doi.org/10.1038/s41598-023-45258-1
[114] Stephens RI, Fatemi A, Stephens RR et al (2000) Metal fatigue in engineering. 2nd edn. John Wiley & Sons, New York
[115] Hemmasian EA, Guo S, Raush J (2021) Corrosion performance of additively manufactured stainless steel parts: a review. Addit Manuf 37:101689. https://doi.org/10.1016/j.addma.2020.101689
[116] Ron T, Levy GK, Dolev O et al (2020) The effect of microstructural imperfections on corrosion fatigue of additively manufactured ER70S-6 alloy produced by wire arc deposition. Metals 10(1):98. https://doi.org/10.3390/met10010098
[117] Günther J, Krewerth D, Lippmann T et al (2017) Fatigue life of additively manufactured Ti-6Al-4V in the very high cycle fatigue regime. Int J Fatigue 94:236-245. https://doi.org/10.1016/j.ijfatigue.2016.05.018
[118] Leung CLA, Marussi S, Atwood RC et al (2018) In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing. Nat Commun 9:1355. https://doi.org/10.1038/s41467-018-03734-7
[119] Edwards P, Ramulu M (2014) Fatigue performance evaluation of selective laser melted Ti-6Al-4V. Mater Sci Eng A 598:327-337. https://doi.org/10.1016/j.msea.2014.01.041
[120] Molaei R, Fatemi A, Sanaei N et al (2020) Fatigue of additive manufactured Ti-6Al-4V, Part II: the relationship between microstructure, material cyclic properties, and component performance. Int J Fatigue 132:105363. https://doi.org/10.1016/jijfatigue.2019.105363
[121] Yadollahi A, Mahtabi MJ, Khalili A et al (2018) Fatigue life prediction of additively manufactured material: effects of surface roughness, defect size, and shape. Fatigue Fract Eng Mater Struct 41:1602-1614. https://doi.org/10.1111/FFE.12799
[122] Tammas-Williams S, Withers PJ, Todd I et al (2017) The influence of porosity on fatigue crack initiation in additively manufactured titanium components. Sci Rep 7:7308. https://doi.org/10.1038/s41598-017-06504-5
[123] Prasad MRG, Biswas A, Geenen K et al (2020) Influence of pore characteristics on anisotropic mechanical behavior of laser powder bed fusion-manufactured metal by micromechanical modeling. Adv Eng Mater 22:2000641. https://doi.org/10.1002/ADEM.202000641
[124] Brennan MC, Keist JS, Palmer TA (2021) Defects in metal additive manufacturing processes. J Mater Eng Perform 30:4808-4818. https://doi.org/10.1007/s11665-021-05919-6
[125] Jia Q, Gu D (2014) Selective laser melting additive manufacturing of Inconel 718 superalloy parts: densification, microstructure and properties. J Alloys Compd 585:713-721. https://doi.org/10.1016/J.JALLCOM.2013.09.171
[126] Nassar AR, Gundermann MA, Reutzel EW et al (2019) Formation processes for large ejecta and interactions with melt pool formation in powder bed fusion additive manufacturing. Sci Rep 9:5038. https://doi.org/10.1038/s41598-019-41415-7
[127] Wits WW, Carmignato S, Zanini F et al (2016) Porosity testing methods for the quality assessment of selective laser melted parts. CIRP Ann 65:201-204. https://doi.org/10.1016/J.CIRP.2016.04.054
[128] Tang M, Pistorius PC, Beuth JL (2017) Prediction of lack-of-fusion porosity for powder bed fusion. Addit Manuf 14:39-48. https://doi.org/10.1016/j.addma.2016.12.001
[129] Mukherjee T, DebRoy T (2018) Mitigation of lack of fusion defects in powder bed fusion additive manufacturing. J Manuf Process 36:442-449. https://doi.org/10.1016/j.jmapro.2018.10.028
[130] Thomas M, Baxter GJ, Todd I (2016) Normalised model-based processing diagrams for additive layer manufacture of engineering alloys. Acta Mater 108:26-35. https://doi.org/10.1016/j.actamat.2016.02.025
[131] Du C, Zhao Y, Jiang J et al (2023) Pore defects in laser powder bed fusion: formation mechanism, control method, and perspectives. J Alloys Compd 944:169215. https://doi.org/10.1016/J.JALLCOM.2023.169215
[132] Shrestha S, Chou K (2022) Formation of keyhole and lack of fusion pores during the laser powder bed fusion process. Manuf Lett 32:19-23. https://doi.org/10.1016/J.MFGLET.2022.01.005
[133] Raza A, Hryha E, Koerner C et al (2021) Characterization of spatter and sublimation in alloy 718 during electron beam melting. Mater 14:5953. https://doi.org/10.3390/MA14205953
[134] Laleh M, Hughes AE, Yang S et al (2021) A critical insight into lack-of-fusion pore structures in additively manufactured stainless steel. Addit Manuf 38:101762. https://doi.org/10.1016/J.ADDMA.2020.101762
[135] Zafer YE, Goel S, Ganvir A et al (2020) Encapsulation of electron beam melting produced alloy 718 to reduce surface connected defects by hot isostatic pressing. Mater 13:1226. https://doi.org/10.3390/MA13051226
[136] Damri E, Tiferet E, Braun D et al (2021) Effects of gas pressure during electron beam energy deposition in the EBM additive manufacturing process. Metals 11:601. https://doi.org/10.3390/MET11040601
[137] Hojjatzadeh SMH, Parab ND, Guo Q et al (2020) Direct observation of pore formation mechanisms during LPBF additive manufacturing process and high energy density laser welding. Int J Mach Tools Manuf 153:103555. https://doi.org/10.1016/j.ijmachtools.2020.103555
[138] Ge W, Fuh JYH, Na SJ (2021) Numerical modelling of keyhole formation in selective laser melting of Ti6Al4V. J Manuf Process 62:646-654. https://doi.org/10.1016/j.jmapro.2021.01.005
[139] Khairallah SA, Martin AA, Lee JRI et al (2020) Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing. Science 368:660-665. https://doi.org/10.1126/science.aay7830
[140] Wang L, Zhang Y, Chia HY et al (2022) Mechanism of keyhole pore formation in metal additive manufacturing. NPJ Comput Mater 8:22. https://doi.org/10.1038/s41524-022-00699-6
[141] Martin JH, Yahata BD, Hundley JM et al (2017) 3D printing of high-strength aluminium alloys. Nature 549:365-369. https://doi.org/10.1038/nature23894
[142] Jost EW, Miers JC, Robbins A et al (2021) Effects of spatial energy distribution-induced porosity on mechanical properties of laser powder bed fusion 316L stainless steel. Addit Manuf 39:101875. https://doi.org/10.1016/j.addma.2021.101875
[143] Li E, Zhou Z, Wang L et al (2022) Modelling of keyhole dynamics and melt pool flow in laser powder bed fusion process. Powder Technol 400:117262. https://doi.org/10.1016/j.powtec.2022.117262
[144] Tan W, Shin YC (2014) Analysis of multi-phase interaction and its effects on keyhole dynamics with a multi-physics numerical model. J Phys D Appl Phys 47:345501. https://doi.org/10.1088/0022-3727/47/34/345501
[145] Bayat M, Thanki A, Mohanty S et al (2019) Keyhole-induced porosities in laser-based powder bed fusion (L-PBF) of Ti6Al4V: high-fidelity modelling and experimental validation. Addit Manuf 30:100835. https://doi.org/10.1016/j.addma.2019.100835
[146] Chen Y, Clark SJ, Leung CLA et al (2020) In-situ synchrotron imaging of keyhole mode multi-layer laser powder bed fusion additive manufacturing. Appl Mater Today 20:100650. https://doi.org/10.1016/j.apmt.2020.100650
[147] Guo Q, Zhao C, Qu M et al (2020) In-situ full-field mapping of melt flow dynamics in laser metal additive manufacturing. Addit Manuf 31:100939. https://doi.org/10.1016/j.addma.2019.100939
[148] Panwisawas C, Perumal B, Ward RM et al (2017) Keyhole formation and thermal fluid flow-induced porosity during laser fusion welding in titanium alloys: experimental and modelling. Acta Mater 126:251-263. https://doi.org/10.1016/j.actamat.2016.12.062
[149] Cunningham R, Zhao C, Parab N et al (2019) Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed X-ray imaging. Science 363:849-852. https://doi.org/10.1126/science.aav4687
[150] Zhao C, Parab ND, Li X et al (2020) Critical instability at moving keyhole tip generates porosity in laser melting. Science 370:1080-1086. https://doi.org/10.1126/science.abd1587
