Ultrasonic cutting is an advanced machining technology applied to Nomex honeycomb cores. However, during the finishing process, machining errors exceeding the allowable tolerances occur owing to the lack of an effective path planning method. This study addresses this issue by examining tool path planning for finishing off various typical honeycomb core features. Initially, a theoretical and experimental comparison of the residual heights of the honeycomb core plane features revealed that machining accuracy was superior along the double-wall direction to that along the perpendicular double-wall direction. Thereafter, the theoretical model of the plane features was used to predict the residual heights of the lead angle in the range of 0°-0.5° along the double-wall direction. In addition, theoretical models for residual height were derived for convex and concave surface features using transverse and longitudinal cutting methods, respectively. This study introduces algorithms for tool interference checking and tool posture adjustment to determine the critical lead angle preventing interference. By integrating these algorithms, a honeycomb core finishing path planning processor was developed on the MATLAB platform. Finally, simulations of the solid model were performed using VERICUT software to verify the feasibility of the proposed algorithms. Actual machining of honeycomb core feature parts demonstrated that the developed finishing processor had the ability to achieve high-precision results.
The full text can be downloaded at https://doi.org/10.1007/s40436-025-00583-8
Heng Luo
,
Zhi-Gang Dong
,
Yan Qin
,
Ren-Ke Kang
,
Yi-Dan Wang
. Finishing path planning of Nomex honeycomb core via ultrasonic cutting[J]. Advances in Manufacturing, 2026
, 14(3)
: 711
-729
.
DOI: 10.1007/s40436-025-00583-8
[1] Ge YM, Xue JY, Liu LP et al (2024) Advances in multiple assembly acoustic structural design strategies for honeycomb composites: a review. Mater Today Commun 38:108013. https://doi.org/10.1016/j.mtcomm.2023.108013
[2] Zhou HL, Zhao M, He NH et al (2024) Compressive response and energy absorption of additive manufactured Ti-6Al-4V triply periodic minimal surface honeycomb structure. J Alloy Compd 982:173744. https://doi.org/10.1016/j.jallcom.2024.173744
[3] Kmita-Fudalej G, Kolakowski Z, Szewczyk W (2024) Method for calculating the bending stiffness of honeycomb paperboard. Materials 17(4):878. https://doi.org/10.3390/ma17040878
[4] Shi P, Chen Y, Wei JL et al (2024) Design and low-velocity impact behavior of an origami-bellow foldcore honeycomb acoustic metastructure. Thin-Walled Struct 197:111607. https://doi.org/10.1016/j.tws.2024.111607
[5] Chang BH, Wang ZN, Bi GJ (2024) Study on the energy absorption characteristics of different composite honeycomb sandwich structures under impact energy. Appl Sci-Basel 14(7):2832. https://doi.org/10.3390/app14072832
[6] Fan JB, Li PH, Guo WQ et al (2023) Flatwise compression behaviour and mechanical properties of gradient-tandem Nomex honeycomb sandwich panels. J Sandw Struct Mater 26(4):449-471. https://doi.org/10.1177/10996362231212558
[7] Naresh K, Alia RA, Cantwell WJ et al (2023) Influence of face sheet thickness on flexural strength characteristics of carbon/epoxy/Nomex honeycomb sandwich panels. J Sandw Struct Mater 25(5):537-554. https://doi.org/10.1177/10996362231159925
[8] Deng YF, Hu XY, Yang XY et al (2022) Dynamic response of Nomex honeycomb sandwich panels subjected to aluminum foam projectile impact─an experimental study. Polym Compos 44(2):1017-1037. https://doi.org/10.1002/pc.27151
[9] Zarrouk T, Nouari M, Benbouaza A et al (2023) Influence of cutting tool geometry when milling Nomex honeycomb structure. Int J Adv Manuf Technol 130(1/2):649-663. https://doi.org/10.1007/s00170-023-12729-8
[10] Jaafar M, Makich H, Nouari M (2021) A new criterion to evaluate the machined surface quality of the Nomex® honeycomb materials. J Manuf Process 69:567-582. https://doi.org/10.1016/j.jmapro.2021.07.062
[11] Jiang J, Liu Z (2021) Formation mechanism of tearing defects in machining Nomex honeycomb core. Int J Adv Manuf Technol 112(11/12):3167-3176. https://doi.org/10.1007/s00170-021-06603-8
[12] Xu QH, Bao YJ, Wang YQ et al (2021) Investigation on damage reduction method by varying cutting angles in the cutting process of rectangular Nomex honeycomb core. J Manuf Process 68:1803-1813. https://doi.org/10.1016/j.jmapro.2021.07.006
[13] Xu J, Zhang KX, Zha HT et al (2023) Surface integrity of Nomex honeycomb composites after ultrasonic vibration machining by using disc cutters. J Manuf Process 102:1010-1022. https://doi.org/10.1016/j.jmapro.2023.08.007
[14] Sun JS, Wang YD, Zhou P et al (2023) Equivalent mechanical model of resin-coated aramid paper of Nomex honeycomb. Int J Mech Sci 240:107935. https://doi.org/10.1016/j.ijmecsci.2022.107935
[15] Xu J, Wang CX, Feng PF et al (2023) Meso-scale cracks initiation of Nomex honeycomb composites in orthogonal cutting with a straight blade cutter. Compos Sci Technol 233:109914. https://doi.org/10.1016/j.compscitech.2023.109914
[16] Ma K, Wang JJ, Zhang JF et al (2022) A force-insensitive impedance compensation method for giant magnetostriction ultrasonic cutting system of Nomex honeycomb composites. Compos Struct 294:115708. https://doi.org/10.1016/j.compstruct.2022.115708
[17] Yu HF, Hu XP, Kong LY et al (2019) Process path planning based on efficiency model for ultrasonic cutting curved surface of honeycomb composite parts. Adv Mech Eng 11(10):1687814019884176. https://doi.org/10.1177/1687814019884176
[18] Sun JS, Kang RK, Zhou P et al (2023) Review on ultrasonic cutting of honeycomb core. J Mech Eng 59(9):298-319. https://doi.org/10.3901/JME.2023.09.298
[19] Wang N, Tang K (2008) Five-axis tool path generation for a flat-end tool based on iso-conic partitioning. Comput-Aided Des 40(12):1067-1079. https://doi.org/10.1016/j.cad.2008.09.005
[20] Jun CS, Cha K, Lee YS (2003) Optimizing tool orientations for 5-axis machining by configuration-space search method. Comput-Aided Des 35(6):549-566. https://doi.org/10.1016/S0010-4485(02)00077-5
[21] Chen YX, Ding Y (2023) Posture optimization in robotic flat-end milling based on sequential quadratic programming. J Manuf Sci Eng-Trans ASME 145(6):061001. https://doi.org/10.1115/1.4056707
[22] Zou X, Tam HY, Xu HY et al (2019) Flat-end tool orientation based on rotation-minimizing frame. Adv Manuf 7(3):257-269. https://doi.org/10.1007/s40436-019-00271-4
[23] Chiou CJ, Lee YS (2002) A machining potential field approach to tool path generation for multi-axis sculptured surface machining. Comput-Aided Des 34(5):357-371. https://doi.org/10.1016/S0010-4485(01)00102-6
[24] Yuan CM, Mi ZP, Jia XH et al (2021) Tool orientation optimization and path planning for 5-axis machining. J Syst Sci Complex 34(1):83-106. https://doi.org/10.1007/s11424-020-9270-1
[25] Wu BH, Liang MC, Zhang Y et al (2018) Optimization of machining strip width using effective cutting shape of flat-end cutter for five-axis free-form surface machining. Int J Adv Manuf Technol 94(5/8):2623-2633. https://doi.org/10.1007/s00170-017-0953-2
[26] Wang YD, Kang RK, Qin Y et al (2021) Effects of inclination angles of disc cutter on machining quality of Nomex honeycomb core in ultrasonic cutting. Front Mech Eng 16(2):285-297. https://doi.org/10.1007/s11465-021-0631-9
[27] Hu XP, Chen SY, Zhang ZC (2012) Research on curved surface forming of Nomex honeycomb material based on ultrasonic NC cutting. Adv Mater Res 538/541:1377-1381. https://doi.org/10.4028/www.scientific.net/AMR.538-541.1377
[28] Yang X, Hu ZW, Wang GX (2021) Research on numerical control programming of honeycomb core materials based on ultrasonic vibration cutting. Sci J Intell Syst Res 3(4):43-50
[29] Chen Y, Shi JY, Lu CH et al (2024) Hierarchical clustering-based collapse mode identification and design optimization of energy-dissipation braces inspired by the triangular resch pattern. J Struct Eng 150(5):04024037. https://doi.org/10.1061/JSENDH.STENG-12805
[30] Sun JS, Kang RK, Qin Y et al (2021) Simulated and experimental study on the ultrasonic cutting mechanism of aluminum honeycomb by disc cutter. Compos Struct 275:114431. https://doi.org/10.1016/j.compstruct.2021.114431
[31] Nazari S, Keshavarz MMP, Sareh P (2023) A multi-objective optimization approach to designing window and shading systems considering building energy consumption and occupant comfort. Eng Rep 5(10):e12726. https://doi.org/10.1002/eng2.12726
[32] Mughal KH, Jamil MF, Qureshi MAM et al (2024) Investigation of rotary ultrasonic vibration assisted machining of Nomex honeycomb composite structures. Int J Adv Manuf Technol 130(1/2):163-176. https://doi.org/10.1007/s00170-023-12652-y
