Old Version
AiM

Advances in Manufacturing ›› 2016, Vol. 4 ›› Issue (3): 248-256.doi: 10.1007/s40436-016-0147-4

• • 上一篇    下一篇

Experimental evaluation of blanking and piercing of PVC based composite and hybrid laminates

Vahid Zal1, Hassan Moslemi Naeini1, Ahmad Reza Bahramian2, Behnam Abbaszadeh1   

  1. 1. Faculty of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran;
    2. Faculty of Chemical Engineering, Tarbiat Modares University, Tehran, Iran
  • 收稿日期:2015-12-13 修回日期:2016-07-08 出版日期:2016-09-25 发布日期:2016-09-25
  • 通讯作者: Vahid Zal, Hassan Moslemi Naeini E-mail:vahid.zal@modares.ac.ir;Moslemi@modares.ac.ir

Experimental evaluation of blanking and piercing of PVC based composite and hybrid laminates

Vahid Zal1, Hassan Moslemi Naeini1, Ahmad Reza Bahramian2, Behnam Abbaszadeh1   

  1. 1. Faculty of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran;
    2. Faculty of Chemical Engineering, Tarbiat Modares University, Tehran, Iran
  • Received:2015-12-13 Revised:2016-07-08 Online:2016-09-25 Published:2016-09-25

PDF

587

被引次数

1

摘要：

Blanking is one of the high speed processes to produce flat products from sheets economically. In order to expand this process to new materials, the blanking of polyvinyl chloride (PVC)/fiberglass thermoplastic composite laminates and composite/aluminum hybrid laminates was investigated. The laminates were produced by the film stacking procedure and then blanked by circular die and punches. The blanking process was done in two levels of clearance including 4% and 8% of the laminates thickness, two levels of punch speed including 40 mm/min and 200 mm/min and at two levels of temperature (room temperature and 80℃) for both composite and hybrid laminates. The effects of the parameters on the maximum blanking force, cutting energy, and quality and precision of sheared edges were studied. Cutting mechanism for blanking in different conditions was explained. It was concluded that at room temperature, blanked composite and hybrid laminates had a high quality of sheared edges but at elevated temperature, although the maximum blanking force was reduced, the quality of sheared edge was reduced significantly.

关键词: Composite laminate, Hybrid laminate, Blanking, Fiberglass, Polyvinyl chloride (PVC)

Abstract:

Blanking is one of the high speed processes to produce flat products from sheets economically. In order to expand this process to new materials, the blanking of polyvinyl chloride (PVC)/fiberglass thermoplastic composite laminates and composite/aluminum hybrid laminates was investigated. The laminates were produced by the film stacking procedure and then blanked by circular die and punches. The blanking process was done in two levels of clearance including 4% and 8% of the laminates thickness, two levels of punch speed including 40 mm/min and 200 mm/min and at two levels of temperature (room temperature and 80℃) for both composite and hybrid laminates. The effects of the parameters on the maximum blanking force, cutting energy, and quality and precision of sheared edges were studied. Cutting mechanism for blanking in different conditions was explained. It was concluded that at room temperature, blanked composite and hybrid laminates had a high quality of sheared edges but at elevated temperature, although the maximum blanking force was reduced, the quality of sheared edge was reduced significantly.

Key words: Composite laminate, Hybrid laminate, Blanking, Fiberglass, Polyvinyl chloride (PVC)

Copyright © Advances in Manufacturing
Address：P. O. Box 124, Shanghai University, 99 Shangda Road, Shanghai 200444, China

Tel: 86-21-66135510　 Fax: 86-21-66132736　 E-mail: aim@oa.shu.edu.cn