Intelligent modular design with holonic fuzzy agents

doi:10.1007/s40436-020-00331-0

Advances in Manufacturing ›› 2021, Vol. 9 ›› Issue (1): 81-103.doi: 10.1007/s40436-020-00331-0

• ARTICLES • 上一篇

Intelligent modular design with holonic fuzzy agents

Egon Ostrosi¹, Alain-Jérôme Fougères², Zai-Fang Zhang³, Josip Stjepandić⁴

1 University of Technology of Belfort Montbéliard, ERCOS/ELLIADD EA4661, University Burgundy Franche-Comté, 90010 Belfort, France;
2 School of Engineering, ECAM Rennes, Bruz CS 29128, 35091 Rennes, France;
3 School of Mechatronic Engineering and Automation, Shanghai University, Shanghai 200240, People's Republic of China;
4 PROSTEP AG, Dolivostr.11, 64293 Darmstadt, Germany

收稿日期:2019-09-14 修回日期:2020-05-02 发布日期:2021-02-27
通讯作者: Egon Ostrosi E-mail:egon.ostrosi@utbm.fr
基金资助:
The project was supported by the National Natural Science Foundation of China (Grant No. 51205242), and Shanghai Science and Technology Innovation Action Plan (Grant No. 16111106402).

Intelligent modular design with holonic fuzzy agents

Egon Ostrosi¹, Alain-Jérôme Fougères², Zai-Fang Zhang³, Josip Stjepandić⁴

1 University of Technology of Belfort Montbéliard, ERCOS/ELLIADD EA4661, University Burgundy Franche-Comté, 90010 Belfort, France;
2 School of Engineering, ECAM Rennes, Bruz CS 29128, 35091 Rennes, France;
3 School of Mechatronic Engineering and Automation, Shanghai University, Shanghai 200240, People's Republic of China;
4 PROSTEP AG, Dolivostr.11, 64293 Darmstadt, Germany

Received:2019-09-14 Revised:2020-05-02 Published:2021-02-27
Contact: Egon Ostrosi E-mail:egon.ostrosi@utbm.fr
Supported by:
The project was supported by the National Natural Science Foundation of China (Grant No. 51205242), and Shanghai Science and Technology Innovation Action Plan (Grant No. 16111106402).

摘要/Abstract

摘要： Presently, modular designs use various technologies accompanied by multiple models. Although no integral solution is known, a plethora of approaches is used to resolve this trans disciplinary challenge, often by using local intelligence. However, the effective utilization of multiple models requires proper integration for them to work together as a cohesive system. This requirement calls for the development of intelligent models and tools that can be used for the development of intelligent modular products. Modular design based on these intelligent models and tools is called intelligent modular design. Intelligent modular design requires to be considered both dynamically and holistically by combining customer requirements, product functions, solutions, service specifications, and their fuzziness in order to structure a product into intelligent modules. This paper proposes the use of holonic fuzzy agents to fulfill both the properties of intelligent models and the requirements of intelligent modular design. The set of fuzzy function agents and their corresponding fuzzy solution agents are found from customization of the product-service system in the fuzzy function agent-fuzzy solution agent sub-network. On the basis of attractor agent recognition, the fuzzy function and fuzzy solution agents interact to form the holonic fuzzy module agents. Selfembedding of holonic fuzzy module agents, which is the fundamental property of the holonic structure, is also characterized by vertical and horizontal communication. The flexibility and agility of the software agent make the holonic structure of intelligent modules adaptable. An application illustrates the proposed intelligent modular design.

The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-020-00331-0

关键词: Modularity, Modular design, Intelligent design, Holonic agents, Product platform, Product variety

Abstract: Presently, modular designs use various technologies accompanied by multiple models. Although no integral solution is known, a plethora of approaches is used to resolve this trans disciplinary challenge, often by using local intelligence. However, the effective utilization of multiple models requires proper integration for them to work together as a cohesive system. This requirement calls for the development of intelligent models and tools that can be used for the development of intelligent modular products. Modular design based on these intelligent models and tools is called intelligent modular design. Intelligent modular design requires to be considered both dynamically and holistically by combining customer requirements, product functions, solutions, service specifications, and their fuzziness in order to structure a product into intelligent modules. This paper proposes the use of holonic fuzzy agents to fulfill both the properties of intelligent models and the requirements of intelligent modular design. The set of fuzzy function agents and their corresponding fuzzy solution agents are found from customization of the product-service system in the fuzzy function agent-fuzzy solution agent sub-network. On the basis of attractor agent recognition, the fuzzy function and fuzzy solution agents interact to form the holonic fuzzy module agents. Selfembedding of holonic fuzzy module agents, which is the fundamental property of the holonic structure, is also characterized by vertical and horizontal communication. The flexibility and agility of the software agent make the holonic structure of intelligent modules adaptable. An application illustrates the proposed intelligent modular design.

The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-020-00331-0

Key words: Modularity, Modular design, Intelligent design, Holonic agents, Product platform, Product variety

Egon Ostrosi, Alain-Jérôme Fougères, Zai-Fang Zhang, Josip Stjepandić. Intelligent modular design with holonic fuzzy agents[J]. Advances in Manufacturing, 2021, 9(1): 81-103.

参考文献

1. Fodor JA (1983) The modularity of mind. MIT Press, Cambridge
2. Salvador F (2007) Toward a product system modularity construct:literature review and reconceptualization. IEEE Trans Eng Manag 54:219-240
3. Sosa ME, Eppinger SD, Rowles CM (2007) A network approach to define modularity of components in complex products. J Mech Des 129:1118-1129
4. Bonvoisin J, Halstenberg F, Buchert T et al (2016) A systematic literature review on modular product design. J Eng Des 27:488-514
5. Kashkoush M, El Maraghy H (2017) Designing modular product architecture for optimal overall product modularity. J Eng Des 28:293-316
6. Issa H, Ostrosi E, Lenczner M et al (2017) Fuzzy holons for intelligent multi-scale design in cloud-based design for configurations. J Intell Manuf 28:1219-1247
7. Ong SK, Xu QL, Nee AYC (2008) Design reuse in product development modeling, analysis and optimization. World Scientific Publishing, Singapore
8. Fogliatto FS, da Silveira GJ (eds) (2011) Mass customization:engineering and managing global operations. Springer, London
9. Stone RB, Wood KL (2000) Development of a functional basis for design. J Mech Des 122:359-370
10. Suh NP (2001) Axiomatic design:advances and applications. Oxford University Press, New York
11. Browning TR (2001) Applying the design structure matrix to system decomposition and integration problems:a review and new directions. IEEE Trans Eng Manag 48:292-306
12. Lange MW, Imsdahl A (2014) Modular function deployment:using module drivers to impart strategies to a product architecture. In:Siddique Z, Hölttä-Otto K, Simpson TW et al (eds) Advances in product family and product platform design. Springer, New York, pp 91-118
13. Fischer JO (2008) Cost-conscious design:proven methods and information systems for the design process. Springer-Verlag, Berlin
14. Schuh G, Arnoscht J, Aleksic S (2012) Systematic design of communalities in products and processes. ZWF Z Für Wirtsch Fabr 107:322-326
15. Ostrosi E, Stjepandić J, Fukuda S et al (2014) Modularity:new trends for product platform strategy support in concurrent engineering. Adv Transdiscipl Eng. https://doi.org/10.3233/978-1-61499-440-4-414
16. Zhuo L, Yoke SW, Kim SL (2008) Integrated approach to modularize the conceptual product family architecture. Int J Adv Manuf Technol 36:83-96
17. Baylis K, Zhang G, McAdams DA (2018) Product family platform selection using a Pareto front of maximum commonality and strategic modularity. Res Eng Des 29:547-563
18. Raudberget D, Elgh F, Stolt R et al (2019) Developing agile platform assets-exploring ways to reach beyond modularisation at five product development companies. Int J Agile Syst Manag 12:311-331
19. Jiao J, Simpson TW, Siddique Z (2007) Product family design and platform-based product development:a state-of-the-art review. J Intell Manuf 18:5-29
20. Stjepandić J, Ostrosi E, Fougères AJ et al (2015) Modularity and supporting tools and methods. In:Stjepandić J, Wognum N, Verhagen JCW (eds) Concurrent engineering in the 21st century. Springer International Publishing, Cham, pp 389-420
21. Bruun HPL, Mortensen NH, Harlou U et al (2015) PLM system support for modular product development. Comput Ind 67:97-111
22. Sun J, Chai N, Pi G et al (2017) Modularization of product service system based on functional requirement. Procedia CIRP 64:301-305
23. Tinnilä M, Lipponen M, Rajahonka M et al (2010) The concept of modularity:diffusion from manufacturing to service production. J Manuf Technol Manag 21:355-375
24. Jung M (2005) Controlling of modular product families in the automotive industry. Dissertation, Deutscher University, Wiesbaden
25. Piller FT, Tseng MM (2010) Handbook of research in mass customization and personalization. World Scientific, Singapore
26. Custódio DT, Roehe VGL, Nunes FL et al (2018) Variant product configuration of industrial air handling units in a MTO environment. Int J Adv Manuf Technol 95:1025-1037
27. Kreng VB, Lee TP (2004) Modular product design with grouping genetic algorithm-a case study. Comput Ind Eng 46:443-460
28. Sinha K, Suh ES (2018) Pareto-optimization of complex system architecture for structural complexity and modularity. Res Eng Des 29:123-141
29. Xu X, Zhang W, Ding X (2018) Modular design method for filament winding process equipment based on GGA and NSGAII. Int J Adv Manuf Technol 94:2057-2076
30. Yu S, Yang Q, Tao J et al (2011) Product modular design incorporating life cycle issues-group genetic algorithm (GGA) based method. J Clean Prod 19:1016-1032
31. Lee MJ, Case K, Marshall R (2016) Product lifecycle optimisation of car climate controls using analytical hierarchical process (AHP) analysis and a multi-objective grouping genetic algorithm (MOGGA). J Eng Sci Technol 11:1-17
32. Pandremenos J, Chryssolouris G (2011) A neural network approach for the development of modular product architectures. Int J Comput Integr Manuf 24:879-887
33. Fougères AJ, Ostrosi E (2013) Fuzzy agent-based approach for consensual design synthesis in product configuration. Integr Comput-Aided Eng 20:259-274
34. Albrecht SV, Stone P (2018) Autonomous agents modelling other agents:a comprehensive survey and open problems. Artif Intell 258:66-95
35. Valckenaers P, Van Brussel H, Hadeli BO et al (2003) On the design of emergent systems:an investigation of integration and interoperability issues. Eng Appl Artif Intell 16:377-393
36. Deciu ER, Ostrosi E, Ferney M et al (2005) Configurable product design using multiple fuzzy models. J Eng Des 16:209-233
37. He B, Pan Q, Deng Z (2018) Product carbon footprint for product life cycle under uncertainty. J Clean Prod 187:459-472
38. Ostrosi E, Fougères AJ (2011) Optimization of product configuration assisted by fuzzy agents. Int J Interact Des Manuf 5:29-44
39. Ostrosi E, Haxhiaj L, Ferney M (2008) Configuration grammars:powerful tools for product modelling in CAD systems. In:Curran R, Chou SY, Trappey A (eds) Collaborative product and service life cycle management for a sustainable world. Springer, London, pp 469-481
40. Ostrosi E, Fougères AJ, Ferney M et al (2012) A fuzzy configuration multi-agent approach for product family modelling in conceptual design. J Intell Manuf 23:2565-2586
41. Huang CC (2004) A multi-agent approach to collaborative design of modular products. Concurr Eng 12:39-47
42. Issa H, Ostrosi E, Lenczner M et al (2013) Influence of functional knowledge structuring for modular design. Adv Mater Res 651:595-600
43. Overmeyer L, Bentlage A (2014) Small-scaled modular design for aircraft wings. In:Denkena B (ed) New production technologies in aerospace industry. Springer International Publishing, Berlin, pp 55-62
44. Kim S, Moon SK (2019) Eco-modular product architecture identification and assessment for product recovery. J Intell Manuf 30:383-403
45. Zhang Z, Chai N, Ostrosi E et al (2019) Extraction of association rules in the schematic design of product service system based on Pareto-MODGDFA. Comput Ind Eng 129:392-403
46. Elgh F (2014) Automated engineer-to-order systems-a taskoriented approach to enable traceability of design rationale. Int J Agile Syst Manag 7:324
47. André S, Elgh F (2018) Modeling of transdisciplinary engineering assets using the design platform approach for improved customization ability. Adv Eng Inform 38:277-290
48. Stjepandic J, Wognum N, Verhagen WJC (eds) (2019) Systems engineering in research and industrial practice:foundations, developments and challenges. Springer, Berlin. https://doi.org/10.1007/978-3-030-33312-6
49. Krstic D (2004) Computing with analyzed shapes. In:Design computing and cognition. Springer, pp 397-416
50. Valckenaers P, Van Brussel H (2005) Fundamental insights into holonic systems design. In:International conference on industrial applications of holonic and multi-agent systems. Springer, pp 11-22
51. Valckenaers P, Van Brussel H, Wyns J et al (1998) Designing holonic manufacturing systems. Robot Comput Integr Manuf 14:455-464
52. Van Brussel H, Bongaerts L, Wyns J et al (1999) A conceptual framework for holonic manufacturing:Identification of manufacturing holons. J Manuf Syst 18:35
53. Van Brussel H, Wyns J, Valckenaers P et al (1998) Reference architecture for holonic manufacturing systems:PROSA. Comput Ind 37:255-274
54. Leitão P, Restivo F (2008) A holonic approach to dynamic manufacturing scheduling. Robot Comput Integr Manuf 24:625-634
55. Leitão P, Restivo F (2006) ADACOR:a holonic architecture for agile and adaptive manufacturing control. Comput Ind 57:121-130
56. Arai T, Aiyama Y, Sugi M et al (2001) Holonic assembly system with plug and produce. Comput Ind 46:289-299
57. Hsieh FS (2008) Robustness analysis of holonic assembly/disassembly processes with Petri nets. Automatica 44:2538-2548
58. Hashemian M (2005) Design for adaptability. Dissertation, University of Saskatchewan, Saskatoon, Saskatchewan, Canada
59. Ostrosi E, Fougères AJ, Ferney M (2012) Fuzzy agents for product configuration in collaborative and distributed design process. Appl Soft Comput 12:2091-2105

Intelligent modular design with holonic fuzzy agents

Intelligent modular design with holonic fuzzy agents

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价