Kinematic analysis and simulation of a new-type robot
with special structure

doi:10.1007/s40436-014-0094-x

Advances in Manufacturing ›› 2014, Vol. 2 ›› Issue (4): 295-302.doi: 10.1007/s40436-014-0094-x

Kinematic analysis and simulation of a new-type robot with special structure

Shuai Guo, Hua-Wei Li,Jian-Cheng Ji,Zhi-Fa Ming

Key Laboratory of Intelligent Manufacturing and Robotics, School of Mechatronics Engineering and Automation, Shanghai University

收稿日期:2014-03-12 出版日期:2014-12-25 发布日期:2014-12-25
通讯作者: e-mail: guoshuai@shu.edu.cn
作者简介:e-mail: guoshuai@shu.edu.cn

Kinematic analysis and simulation of a new-type robot with special structure

Shuai Guo, Hua-Wei Li,Jian-Cheng Ji,Zhi-Fa Ming

Key Laboratory of Intelligent Manufacturing and Robotics, School of Mechatronics Engineering and Automation, Shanghai University

Received:2014-03-12 Online:2014-12-25 Published:2014-12-25
Contact: e-mail: guoshuai@shu.edu.cn
About author:e-mail: guoshuai@shu.edu.cn

摘要/Abstract

摘要： Common methods, such as Denavit-Hartenberg (D-H) method, cannot be simply used in kinematic analysis of special robots with hybrid hinge as it is difficult to obtain the main parameters of this method. Hence, a homogeneous transformation theory is presented to solve this problem. Firstly, the kinematics characteristic of this special structure is analyzed on the basis of the closed-chain theory. In such a theory, closed chains can be transformed to open chains, which makes it easier to analyze this structure. Thus, it will become much easier to establish kinematics equations and get the solutions. Then, the robot model can be built in the Simmechanics (a tool box of MATLAB) with these equation solutions. It is necessary to design a graphical user interface (GUI) for robot simulation. After that, the model robot and real robot will respectively move to some spatial points under the same circumstances. At last, all data of kinematic analysis will be verified based on comparison between data got from simulation and real robot.

关键词: Mixed hinge structure , Homogeneous transformation , Kinematic analysis , Kinematic simulation

Abstract: Common methods, such as Denavit-Hartenberg (D-H) method, cannot be simply used in kinematic analysis of special robots with hybrid hinge as it is difficult to obtain the main parameters of this method. Hence, a homogeneous transformation theory is presented to solve this problem. Firstly, the kinematics characteristic of this special structure is analyzed on the basis of the closed-chain theory. In such a theory, closed chains can be transformed to open chains, which makes it easier to analyze this structure. Thus, it will become much easier to establish kinematics equations and get the solutions. Then, the robot model can be built in the Simmechanics (a tool box of MATLAB) with these equation solutions. It is necessary to design a graphical user interface (GUI) for robot simulation. After that, the model robot and real robot will respectively move to some spatial points under the same circumstances. At last, all data of kinematic analysis will be verified based on comparison between data got from simulation and real robot.

Key words: Mixed hinge structure , Homogeneous transformation , Kinematic analysis , Kinematic simulation

Shuai Guo, Hua-Wei Li,Jian-Cheng Ji,Zhi-Fa Ming. Kinematic analysis and simulation of a new-type robot with special structure[J]. Advances in Manufacturing, 2014, 2(4): 295-302.

参考文献

1. Bi LY, Liu LS (2012) 6-axis robot design and simulation based on simulationX. In: Yang DH (ed) Informatics in control, automation and robotics, vol 133. Springer, Heidelberg, pp 537–544
2. Song T, He YY, Wang P et al (2013) Kinematic analysis of series industrial robot with hybrid hinge structure. Mach Des Res 5:8–9
3. Fathi HG, Olivier C, Ruvinda G et al (2000) Modeling and set point control of closed-chain mechanisms: theory and experiment.IEEE Trans Control Syst Technol 8(8):801–815
4. Wang KS, Terje KL (1988) Structure design and kinematics of a robot manipulator. Robotica 6(4):299–309
5. Selig JM (2011) On the geometry of point-plane constraints on rigid-body displacements. Acta Appl Math 116:133–155
6. Suguru A, Masahiro S (2006) Human-like movements of robotic arms with redundant DOFs: virtual spring-damper hypothesis to tackle the Bernstein problem. In: Proceedings of IEEE international conference on robotics and automation, Orlando, May 2006
7. Choi HB, Konno A, Uchiyama M (2009) Closed-form forward kinematics solutions of a 4-DOF parallel robot. Int J Control Autom Syst 7(5):858–864
8. Pisla D, Gherman B, Vaida C et al (2012) Kinematic modeling of a 5-DOF hybrid parallel robot for laparoscopic surgery. Robotica 30(7):1095–1107
9. Gallardo-Alvarado J (2005) Kinematics of a hybrid manipulator by means of screw theory. Multibody Sys Dyn 14(3/4):345–366
10. Kuo SR, Yang YB (2013) A rigid-body-qualified plate theory for the nonlinear analysis of structures involving torsional actions.Eng Struct 47:2–15
11. Wang ZY, Zhao ZQ, Pang ZF et al (2011) Kinematics analysis and simulation of a new 3 degrees of freedom spatial robot mechanism composed by closed chain. In: The second international conference on mechanic automation and control engineering, Hohhot, July 2011
12. Wen GJ, Xu LH, He FL (2009) Offline kinematics simulation of 6-DOF welding robot. In: The 9th international conference on measuring technology and mechatronics automation, Zhangjiajie, April 2009
13. Xiao WL, Henning S, Torsten L et al (2011) Closed-form inverse kinematics of 6R milling robot with singularity avoidance. Prod Eng Devel 5:103–110
14. Wu Y, Cheng LH, Fan GF et al (2014) Inverse kinematics solution and optimization of 6-DOF handling robot. Appl Mech Mater 635–637:1355–1359
15. Gao JR, Wang YZ, Chen ZP (2014) Modeling and simulation of inverse kinematics for planar 3-RRR parallel robot based on SimMechanics. Adv Mater Res 898:510–513
16. Markus L (1994) Application of the general elimination method in robot kinematics. J Intell Rob Syst 11:109–116
17. Shi ZX, Ye MY, Luo YF et al (2011) The decoupled leading terms elimination algorithm and its application in inverse kinematic analysis of 5R robot. In: The international conference on computer science and service system, Nanjing, June 2011
18. Wang YS, Gai YX, Wu FY (2011) A robot kinematics simulation system based on OpenGL. In: The IEEE conference on robotics, automation and mechatronics, Qingdao, September 2011
19. Phung AS, Malzahn J, Hoffmann F et al (2011) Data based kinematic model of a multi-flexible-link robot arm for varying payloads. In: Proceedings of the the IEEE international conference on robotics and biomimetics, Karon Beach, December 2011
20. Toz M, Kucuk S (2008) Dynamics simulation toolbox for industrial robot manipulators. Comput Appl Eng Educ
18(2):319–330
21. Fatehi MH, Vali AR, Eghtesad M et al (2011) Modeling and control of 3-PRS parallel robot and simulation based on Sim-Mechanics in MATLAB. In: 2nd international conference on control, instrumentation and automation, Shiraz, December 2011
22. Dean-Leon E, Nair S, Knoll A (2012) User friendly MATLABToolbox for symbolic robot dynamic modeling used for control design. In: Proceedings of the IEEE international conference on robotics and biomimetics, Guangzhou, December 2012

编辑推荐 0

Metrics

阅读次数

全文

182

HTML			PDF

最新录用	在线预览	正式出版	最新录用	在线预览	正式出版
0	0	0	0	0	182

来源	本网站	其他网站

次数	128	54
比例	70%	30%

摘要

338

最新录用	在线预览	正式出版

0	0	338

来源	本网站	其他网站

次数	234	104
比例	69%	31%

Kinematic analysis and simulation of a new-type robot with special structure

Kinematic analysis and simulation of a new-type robot with special structure

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐 0

Metrics

本文评价