Making aviation green

doi:10.1007/s40436-013-0008-3

Advances in Manufacturing ›› 2013, Vol. 1 ›› Issue (1): 42-49.doi: 10.1007/s40436-013-0008-3

Making aviation green

Zuo-Ming Lin

Aviation Industry Corporation of China, Beijing 100022, People’s Republic of China

收稿日期:2012-06-14 出版日期:2012-03-01 发布日期:2012-03-01

Making aviation green

Zuo-Ming Lin

Aviation Industry Corporation of China, Beijing 100022, People’s Republic of China

Received:2012-06-14 Online:2012-03-01 Published:2012-03-01

摘要/Abstract

摘要： With rapid economic progress and tremendous advances of science and technology, awareness of environmental protection has become worldwide consensus. Saving energy, reducing emission and dealing with climate changes are global objectives. The aviation industry belongs to the manufacturing industry. Air transportation is a major consumer of natural resources and energy. Development of green technology in aviation manufacturing will have significant impacts on air transportation. On the basis of the international situation, this article focuses on the current development of green aviation manufacturing in China, depicting AVIC’s objectives and commitments to achieving this.

关键词: Green aviation , , Low carbon manufacturing , Energy saving , Emission reduction

Abstract: With rapid economic progress and tremendous advances of science and technology, awareness of environmental protection has become worldwide consensus. Saving energy, reducing emission and dealing with climate changes are global objectives. The aviation industry belongs to the manufacturing industry. Air transportation is a major consumer of natural resources and energy. Development of green technology in aviation manufacturing will have significant impacts on air transportation. On the basis of the international situation, this article focuses on the current development of green aviation manufacturing in China, depicting AVIC’s objectives and commitments to achieving this.

Key words: Green aviation , , Low carbon manufacturing , Energy saving , Emission reduction

Zuo-Ming Lin. Making aviation green[J]. Advances in Manufacturing, 2013, 1(1): 42-49.

[1]	A. P. Tiwary,B. B. Pradhan,B. Bhattacharyya. Application of multi-criteria decision making methods for selection of micro-EDM process parameters[J]. Advances in Manufacturing, 2014, 2(3): 251-258.
[2]	Xin-Hua Yi,Xiao-Min Cheng,Feng-Lian Niu,Hong-Chao Fan. CFD simulation of micro-particle trapping under water tweezers[J]. Advances in Manufacturing, 2014, 2(3): 259-264.
[3]	Min Jiang,Li-Na Chen,Jin He,Guang-Yao Chen,Chong-He Li,Xiong-Gang Lu. Effect of controlled rolling/controlled cooling parameters on microstructure and mechanical properties of the novel pipeline steel[J]. Advances in Manufacturing, 2014, 2(3): 265-274.
[4]	Marius Spo¨ttl,Hardy Mohrbacher. Laser-based manufacturing concepts for efficient production of tailor welded sheet metals[J]. Advances in Manufacturing, 2014, 2(3): 193-202.
[5]	Lapo Chirici,Ke-Sheng Wang. Tackling the storage problem through genetic algorithms[J]. Advances in Manufacturing, 2014, 2(3): 203-211.
[6]	Pierre Coddet,Han-lin Liao,Christian Coddet. A review on high power SOFC electrolyte layer manufacturing using thermal spray and physical vapour deposition technologies[J]. Advances in Manufacturing, 2014, 2(3): 212-221.
[7]	V. B. Saputra,S. K. Ong,A. Y. C. Nee. Optimum calibration of a parallel kinematic manipulator using digital indicators[J]. Advances in Manufacturing, 2014, 2(3): 222-230.
[8]	Yong-Ze Yu,Lu-Lu Zheng,Hai-Ping Chen,Wei-Hua Chen,Qing-Xi Hu. Fabrication of hierarchical polycaprolactone/gel scaffolds via combined 3D bioprinting and electrospinning for tissue engineering[J]. Advances in Manufacturing, 2014, 2(3): 231-238.
[9]	Pushparajah Rajaguru,Hua Lu,Chris Bailey. Application of nonlinear fatigue damage models in power electronic module wirebond structure under various amplitude loadings[J]. Advances in Manufacturing, 2014, 2(3): 239-250.
[10]	Rishad Rayyaan ? Yi Wang ? Richard Kennon. Ontology-based interoperability solutions for textile supply chain[J]. Advances in Manufacturing, 2014, 2(2): 97-105.
[11]	Ke-Sheng Wang. Intelligent and integrated RFID (II-RFID) system for improving traceability in manufacturing[J]. Advances in Manufacturing, 2014, 2(2): 106-120.
[12]	Alemu Moges Belay ? Torgeir Welo ?Petri Helo. Approaching lean product development using system dynamics:investigating front-load effects[J]. Advances in Manufacturing, 2014, 2(2): 130-140.
[13]	B?rge Sj?bakk ? Maria Kollberg Thomassen ?Erlend Alfnes. Implications of automation in engineer-to-order production:a case study[J]. Advances in Manufacturing, 2014, 2(2): 141-149.
[14]	Xue-Hua Sun ? Xue-Jian Chu ? Zhong-Dai Wu. Incentive regulation of banks on third party logistics enterprises in principal-agent-based inventory financing[J]. Advances in Manufacturing, 2014, 2(2): 150-157.
[15]	Emrah Arica ? Daryl J. Powell. A framework for ICT-enabled real-time production planning and control[J]. Advances in Manufacturing, 2014, 2(2): 158-164.

Making aviation green

Making aviation green

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价