Experimental investigation of cutting parameters in machining of 100Cr6 with tangential turn-milling method

doi:10.1007/s40436-016-0134-9

Advances in Manufacturing ›› 2016, Vol. 4 ›› Issue (1): 97-104.doi: 10.1007/s40436-016-0134-9

• • 上一篇

Experimental investigation of cutting parameters in machining of 100Cr6 with tangential turn-milling method

Vedat Savas¹, Cetin Ozay¹, Hasan Ballikaya²

1 Department of Mechanical Engineering, Faculty of Technology, University of Firat, 23119 Elazig, Turkey;
2 Ortakoy Vocational High School, University of Aksaray, Aksaray, Turkey

收稿日期:2014-04-03 修回日期:2016-01-16 出版日期:2016-03-25 发布日期:2016-03-02
通讯作者: Vedat Savas E-mail:vsavas@firat.edu.tr

Experimental investigation of cutting parameters in machining of 100Cr6 with tangential turn-milling method

Vedat Savas¹, Cetin Ozay¹, Hasan Ballikaya²

1 Department of Mechanical Engineering, Faculty of Technology, University of Firat, 23119 Elazig, Turkey;
2 Ortakoy Vocational High School, University of Aksaray, Aksaray, Turkey

Received:2014-04-03 Revised:2016-01-16 Online:2016-03-25 Published:2016-03-02
Contact: Vedat Savas E-mail:vsavas@firat.edu.tr

摘要/Abstract

摘要： The turn-milling methods for machining operation have been developed to increase efficiency of conventional machines recently. These methods are used especially by coupling some apparatuses on the computer numerical control (CNC) machine to decrease the production time and machine costs, ensure the maximum production and increase the quality of machining. In this study, 100Cr6 bearing steel extensively used in industry has been machined by tangential turn-milling method. This paper presents an approach for optimization of the effects of the cutting parameters including cutter speed, workpiece speed, axial feed rate, and depth of cut on the surface roughness in the machining of 100Cr6 steel with tangential turn-milling method by using genetic algorithm (GA). Tangential turning-milling method has been determined to have optimum effects of cutting parameters on the machining of 100Cr6 steel. The experimental results show that the surface roughness quality is close to that of grinding process.

关键词: 100Cr6, Tangential turn-milling, Surface roughness, Genetic algorithm (GA)

Abstract: The turn-milling methods for machining operation have been developed to increase efficiency of conventional machines recently. These methods are used especially by coupling some apparatuses on the computer numerical control (CNC) machine to decrease the production time and machine costs, ensure the maximum production and increase the quality of machining. In this study, 100Cr6 bearing steel extensively used in industry has been machined by tangential turn-milling method. This paper presents an approach for optimization of the effects of the cutting parameters including cutter speed, workpiece speed, axial feed rate, and depth of cut on the surface roughness in the machining of 100Cr6 steel with tangential turn-milling method by using genetic algorithm (GA). Tangential turning-milling method has been determined to have optimum effects of cutting parameters on the machining of 100Cr6 steel. The experimental results show that the surface roughness quality is close to that of grinding process.

Key words: 100Cr6, Tangential turn-milling, Surface roughness, Genetic algorithm (GA)

Vedat Savas, Cetin Ozay, Hasan Ballikaya. Experimental investigation of cutting parameters in machining of 100Cr6 with tangential turn-milling method[J]. Advances in Manufacturing, 2016, 4(1): 97-104.

参考文献

1. Kountanya R, Al-Zkeri I, Altan T (2009) Effect of tool edge geometry and cutting conditions on experimental and simulated chip morphology in orthogonal hard turning of 100Cr6 steel. J Mater Process Technol 209:5068-5076

2. Umbrello D (2011) Influence of material microstructure changes on surface integrity in hard machining of AISI 52100 steel. Int J Adv Manuf Technol 54(9):887-898

3. Mao C, Zhou Z, Zhang J et al (2011) An experimental investigation of affected layers formed in grinding of AISI 52100 steel. Int J Adv Manuf Technol 54(5-8):515-523

4. Mulik RS, Pandey PM (2011) Magnetic abrasive finishing of hardened AISI 52100 steel. Int J Adv Manuf Technol 55(5):501-515

5. Savas V, Ozay C (2008) The optimization of the surface roughness in the process of tangential turn-milling using genetic algorithm. Int J Adv Manuf Technol 37:335-340

6. Savas V, Ozay C (2007) Analysis of the surface roughness of tangential turn-milling for machining with end milling cutter. J Mater Process Technol 186:279-283

7. Savas V, Ozay C (2009) Researching the effects of cutting parameters obtained from MS58 Brass tangential turning-milling processes on surface roughness. Electron J Mach Technol Cover 6(4):65-70

8. Karaguzela U, Bakkal M, Budak E (2012) Process modeling of turn-milling using analytical approach. In: 3rd CIRP conference on process machine interactions (3rd PMI), Procedia CIRP 4:131-139

9. Mahesh G, Muthu S, Devadasan SR (2015) Prediction of surface roughness of end milling operation using genetic algorithm. Int J Adv Manuf Technol 77:369-381

10. Zhu L, Li H, Wang W (2013) Research on rotary surface topography by orthogonal turn-milling. Int J Adv Manuf Technol 69:2279-2292

11. Budak E, Armarego EJA, Altintas Y (1996) Prediction of milling force coefficients from orthogonal cutting data. J Eng Ind 118(2):216-224

12. Altintas Y (2012) Manufacturing automation: metal cutting mechanics, machine tool vibrations, and CNC design, seconded. Cambridge University Press, New York

13. Yuan SM, Zheng WW(2012) The surface roughness modeling on turn-milling process and analysis of influencing factors. Appl Mech Mater 117:1614-1620

14. Zhu L, Tang L, Su C et al (2008) Co-simulation of rigid-flexible coupling system for turn-milling center. In: Proceedings of the 7th world congress on intelligent control and automation June 25-27, Chongqing

15. Tekaüt I, Günay M, S? eker U (2009) Researching the effects of cutting tool vibrations in turning process on surface roughness. In: 5th International advanced technologies symposium, Karabük, pp 1293-1297, Accessed 13-15 May 2009

16. Quintana G, Ciurana J, Ribatallada J (2010) Surface roughness generation and material removal rate in ball end milling perations. Mater Manuf Process 25(6):386-398

17. Mansour A, Abdalla H (2002) Surface roughness model for end milling: a semi-free cutting carbon casehardening steel (EN 32) in dry condition. J Mater Process Technol 124(1-2):183-191

18. Alauddin M, El Baradie MA, Hashmi MSJ (1997) Prediction of tool life in end milling by response surface methodology. J Mater Process Technol 71(3):456-465

19. Chang H, Kim J, Kim IH et al (2007) In-process surface roughness prediction using displacement signals from spindle motion. Int J Mach Tools Manuf 47(6):1021-1026

20. Coker SA, Shin YC (1996) In-process control of surface roughness due to tool wear using a new ultrasonic system. Int J Mach Tools Manuf 36(3):411-422

21. Gologlu C, Sakarya N (2008) The effects of cutter path strategies on surface roughness of pocket milling of 1.2738 steel based on Taguchi method. J Mater Process Technol 206(1-3):7-15

22. Lou SJ, Chen JC (1999) In-process surface roughness recognition (ISRR) system in end-milling operations. Int J Adv Manuf Technol 15(3):200-209

23. Tsai Y, Chen JC, Lou S (1999) An in-process surface recognition system based on neural networks in end milling cutting operations. Int J Mach Tools Manuf 39(4):583-605

24. Benardos PG, Vosniakos GC (2002) Prediction of surface roughness in CNC face milling using neural networks and Taguchi's design of experiments. Robot Comput Integr Manuf 18(5-6):343-354

25. Chen JC, Lou MS (2000) Fuzzy-nets based approach using an accelerometer for in-process surface roughness prediction system in milling operations. J Comput Integr Manuf Syst 13(4):358-368

26. Holland JH (1975) Adaptation in natural and artificial systems. MIT press, Cambridge, pp 9-16

[1]	Wei Zhao, Asif Iqbal, Ding Fang, Ning He, Qi Yang. Experimental study on the meso-scale milling of tungsten carbide WC-17.5Co with PCD end mills[J]. Advances in Manufacturing, 2020, 8(2): 230-241.
[2]	Jia-Hua Zhang, Ai-Ping Li, Xue-Mei Liu. Hybrid genetic algorithm for a type-II robust mixed-model assembly line balancing problem with interval task times[J]. Advances in Manufacturing, 2019, 7(2): 117-132.
[3]	Ramanuj Kumar, Ashok Kumar Sahoo, Purna Chandra Mishra, Rabin Kumar Das. Comparative investigation towards machinability improvement in hard turning using coated and uncoated carbide inserts: part I experimental investigation[J]. Advances in Manufacturing, 2018, 6(1): 52-70.
[4]	Ravindra Nath Yadav. Development and experimental investigation of duplex turning process[J]. Advances in Manufacturing, 2017, 5(2): 149-157.
[5]	A. Pramanik, A. R. Dixit, S. Chattopadhyaya, M. S. Uddin, Yu Dong, A. K. Basak, G. Littlefair. Fatigue life of machined components[J]. Advances in Manufacturing, 2017, 5(1): 59-76.
[6]	Satyanarayana Kosaraju Venu Gopal Anne. Optimal machining conditions for turning Ti-6Al-4V using response surface methodology[J]. Advances in Manufacturing, 2013, 1(4): 329-339.

Experimental investigation of cutting parameters in machining of 100Cr6 with tangential turn-milling method

Experimental investigation of cutting parameters in machining of 100Cr6 with tangential turn-milling method

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 6

编辑推荐

Metrics

本文评价