A wheel-type in-pipe robot for grinding weld beads

doi:10.1007/s40436-017-0174-9

Advances in Manufacturing ›› 2017, Vol. 5 ›› Issue (2): 182-190.doi: 10.1007/s40436-017-0174-9

• • 上一篇

A wheel-type in-pipe robot for grinding weld beads

Zi-Li Xu¹, Song Lu¹, Jun Yang², Yong-Hui Feng¹, Chun-Tai Shen²

1. School of Mechatronic Engineering and Automation, Shanghai University, Shanghai 200072, People's Republic of China;
2. Shanghai Electric Central Research Institute, Shanghai 200063, People's Republic of China

收稿日期:2016-04-18 修回日期:2017-04-17 出版日期:2017-06-25 发布日期:2017-06-25
通讯作者: Song Lu E-mail:623884179@qq.com

A wheel-type in-pipe robot for grinding weld beads

Zi-Li Xu¹, Song Lu¹, Jun Yang², Yong-Hui Feng¹, Chun-Tai Shen²

1. School of Mechatronic Engineering and Automation, Shanghai University, Shanghai 200072, People's Republic of China;
2. Shanghai Electric Central Research Institute, Shanghai 200063, People's Republic of China

Received:2016-04-18 Revised:2017-04-17 Online:2017-06-25 Published:2017-06-25
Contact: Song Lu E-mail:623884179@qq.com

摘要/Abstract

摘要：

To improve the safety and efficiency of polishing operations in circular boiler headers, a new type of wheel-drive polishing robot was developed in this study. The robot was designed to grind weld beads on the inner walls of pipes in diameter between 550 mm and 714 mm. The robot consists of a moving structure, a positioning structure, and a polishing structure. Charge coupled device (CCD) cameras and line lasers are used in the robot's vision system, thus the robot can be manually controlled to move, locate, and grind quickly and accurately. The experimental results showed that the robot performed well in practical applications.

关键词: Grinding robot, In-pipe robot, Circular boiler header, Weld bead

Abstract:

Key words: Grinding robot, In-pipe robot, Circular boiler header, Weld bead

Zi-Li Xu, Song Lu, Jun Yang, Yong-Hui Feng, Chun-Tai Shen. A wheel-type in-pipe robot for grinding weld beads[J]. Advances in Manufacturing, 2017, 5(2): 182-190.

参考文献

1. Yang HJ (1996) Safety monitoring of boiler pressure vessel in power station. China Water & Power Press, Beijing, pp 96-126
2. Zhang HM, Yang XC (2012) Interface between LabVIEW and FANUC robot. Adv Mater Res 443:464-470
3. Rafieian F, Girardin F, Liu Z et al (2014) Angular analysis of the cyclic impacting oscillations in a robotic grinding process. Mech Syst Signal Process 44:160-176
4. Chen Q, Sun Z, Zhang W et al (2008) A robot for welding repair of hydraulic turbine blade. In: IEEE conference on robotics, automation and mechatronics, Chengdu, China. pp 155-159
5. KASRO working robot. http://prokasro.de/en/products/workingrobots- pneumatic. Accessed 20 Apr. 2016
6. Mirats Josep M, Tur William Garthwaite (2010) Robotic devices for water main in-pipe inspection: a survey. J Field Robot 27(4):491-508
7. Luis AM, Markus V (2011) Developing water loss prevention- DeWaLoP in-pipe robot system. In: 20th international workshop on robotics in alpe-adria-danube region, Bron, Czech Republic, pp 1-9
8. Mateos LA, Zhou K, Vincze M (2012) Towards efficient pipe maintenance: DeWaLoP in-pipe robot stability controller. In: international conference on mechatronics and automation, Chengdu, China, pp 1-6
9. Mateos LA, Vincze M (2013) LaMMos-Latching mechanism based on motorized-screw for reconfigurable robots. In: international conference on advanced robotics, Montevideo, Uruguay, pp 1-8
10. Mateos LA, Vincze M (2012) DeWaLoP in-pipe robot position from visual patterns. Mex Int Conf Adv Artif. 7629:239-248
11. Qiao JW, Shang JZ (2013) Application of axiomatic design method in in-pipe robot design. Robot Comput Integr Manuf 29(4):49-57
12. Park JJ, Moon JW, Kim H et al (2013) Development of the untethered in-pipe inspection robot for natural gas pipelines. In: international conference on ubiquitous robots and ambient intelligence, Jeju, Korea, pp 55-58
13. Min J, Setiawan YD, Pratama PS et al (2014) Development and controller design of wheeled-type pipe inspection robot. In: international conference on advances in computing, communications and informatics. Delhi, India, pp 789-795
14. Ye C, Liu L, Xu X et al (2015) Development of an in-pipe robot with two steerable driving wheels. In: international conference on mechatronics and automation, Beijing, China, pp 1955-1959
15. Kakogawa A, Ma S, Hirose S (2014) An in-pipe robot with underactuated parallelogram crawler modules. In: IEEE international conference on robotics and automation, Hong Kong, China, pp 1687-1692
16. Sahari KSM, Anuar A, Mohideen SSK et al (2012) Development of robotic boiler header inspection device. In: joint international conference on soft computing and intelligent systems, Kobe, Japan, pp 769-773
17. Qiao J, Shang J, Goldenberg A (2013) Development of inchworm in-pipe robot based on self-locking mechanism. IEEE/ASME Trans Mechatron 18(2):799-806
18. Tanaka T, Harigaya K, Nakamura T (2014) Development of a peristaltic crawling robot for long-distance inspection of sewer pipes. In: IEEE international conference on advanced intelligent mechatronics, Besancon, France, pp 1552-1557
19. Yu X, Chen Y, Chen M et al (2015) Development of a novel inpipe walking robot. In: IEEE international conference on information and automation, Lijiang, China, pp 364-368
20. Galvez JA, Santos PGD, Pfeiffer F (2001) Intrinsic tactile sensing for the optimization of force distribution in a pipe crawling robot. IEEE/ASME Trans Mechatron 6(1):26-35
21. Nayak A, Pradhan SK (2014) Design of a new in-pipe inspection robot. Proced Eng 97:2081-2091
22. Li T, Ma S, Li B et al (2015) Design and locomotion control strategy for a steerable in-pipe robot. In: IEEE international conference on mechatronics and automation, Beijing, China, pp 1228-1233
23. Yin QH, Kong FR (2012) Crossing ability analysis of triaxial differential pipeline robot. J Mech Electr Eng 29(12):1371-1375

A wheel-type in-pipe robot for grinding weld beads

A wheel-type in-pipe robot for grinding weld beads

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价