Proposition of atomic and close-to-atomic scale manufacturing

doi:10.1007/s40436-023-00442-4

Advances in Manufacturing ›› 2024, Vol. 12 ›› Issue (1): 1-5.doi: 10.1007/s40436-023-00442-4

• • 下一篇

Proposition of atomic and close-to-atomic scale manufacturing

Ju-Fan Zhang¹, Jens Ducree²

1. School of Mechanical and Materials Engineering, University College Dublin, Dublin 4, Ireland;
2. School of Physical Sciences, Dublin City University, Dublin, Ireland

出版日期:2024-03-14 发布日期:2024-03-14
通讯作者: Ju-Fan Zhang,E-mail:jufan.zhang@ucd.ie E-mail:jufan.zhang@ucd.ie
作者简介:Dr. Ju-Fan Zhang is an Assistant Professor in UCD School of Mechanical and Materials Engineering, Ireland. He is the Principal Investigator (PI) of over 10 research funding. He has over 40 publications in peer review journals and 7 patents. He gives 17 invited talks in international conferences/seminars in the recent two years. He is a Member of Irish Manufacturing Council (IMC), International Academy of Engineering and Technology (AET), International Society for Nanomanufacturing (ISNM). His research interests mainly include ACSM, fabrication of solid-state nanopore array and medical devices, microneedles, microtextured artifcial joints, geometrical waveguide for AR display;
Dr. Jens Ducrée holds a Full Professorship of Microsystems in the School of Physical Sciences at Dublin City University (DCU), Ireland. He has been the founding director of FPC@DCU – Ireland’s frst Fraunhofer Project Centre for Embedded Bioanalytical Systems, a joint initiative of Science Foundation Ireland and Fraunhofer-Gesellschaft. Dr. Ducrée is also academic member of the National Centre for Sensor Research (NCSR) and the 3U Joint Institute of Global Health (JIGH), and a principal investigator at the Biodesign Europe (BDE).The main part of his research is directed towards novel microfuidic systems and associated actuation, detection, fabrication and instrumentation technologies for the integration, automation, miniaturization and parallelization of bioanalytical protocols (e.g., immunoassays, nucleic acid testing, general chemistry and cell counting including sample preparation).
基金资助:
The authors would like to thank Professor Fengzhou Fang for the discussion in understanding the concept of the three paradigms of manufacturing advancement.

Proposition of atomic and close-to-atomic scale manufacturing

Ju-Fan Zhang¹, Jens Ducree²

1. School of Mechanical and Materials Engineering, University College Dublin, Dublin 4, Ireland;
2. School of Physical Sciences, Dublin City University, Dublin, Ireland

Online:2024-03-14 Published:2024-03-14
Contact: Ju-Fan Zhang,E-mail:jufan.zhang@ucd.ie E-mail:jufan.zhang@ucd.ie
Supported by:
The authors would like to thank Professor Fengzhou Fang for the discussion in understanding the concept of the three paradigms of manufacturing advancement.

摘要/Abstract

摘要： Atomic and close-to-atomic scale manufacturing (ACSM) is the core competence of Manufacturing III. Unlike other conceptions or terminologies that only focus on the atomic level precision, ACSM defines a new realm of manufacturing where quantum mechanics plays the dominant role in the atom/molecule addition, migration and removal, considering the uncertainty principle and the discrete nature of particles. As ACSM is still in its infant stage, only little has been systematically elaborated at the core proposition of ACSM by now, hence there is a need to understand its concept and vision. This article elucidates the development of ACSM and clarifies its proposition, which aims to achieve a clearer understanding on ACSM and direct more effective efforts toward this promising area.

The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-023-00442-4

关键词: Atomic and close-to-atomic scale manufacturing (ACSM), Atomic, Precision, Manufacturing, Paradigm, Manufacturing III

Abstract: Atomic and close-to-atomic scale manufacturing (ACSM) is the core competence of Manufacturing III. Unlike other conceptions or terminologies that only focus on the atomic level precision, ACSM defines a new realm of manufacturing where quantum mechanics plays the dominant role in the atom/molecule addition, migration and removal, considering the uncertainty principle and the discrete nature of particles. As ACSM is still in its infant stage, only little has been systematically elaborated at the core proposition of ACSM by now, hence there is a need to understand its concept and vision. This article elucidates the development of ACSM and clarifies its proposition, which aims to achieve a clearer understanding on ACSM and direct more effective efforts toward this promising area.

The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-023-00442-4

Key words: Atomic and close-to-atomic scale manufacturing (ACSM), Atomic, Precision, Manufacturing, Paradigm, Manufacturing III

Ju-Fan Zhang, Jens Ducree. Proposition of atomic and close-to-atomic scale manufacturing[J]. Advances in Manufacturing, 2024, 12(1): 1-5.

[1]	Dong-Jiang Wu, Cheng-Xin Li, Ming-Ze Xu, Xue-Xin Yu, Guang-Yi Ma, Huan-Yue Zhang, Cong Zhou, Bi Zhang, Fang-Yong Niu. Holistic high-temperature assistance for laser directed energy deposition of Al₂O₃/ZrO₂ eutectic ceramics: cracking behavior[J]. Advances in Manufacturing, 2026, 14(2): 474-498.
[2]	Mao-Yuan Zhang, Yong-Hong Liu, Long-Fei Li, Chi Ma, Run-Sheng Li, Xin-Lei Wu, Yi-Bao Chen, Li-Xin Wang, Ren-Peng Bian, Zhen-Ye Su, Fan-Bo Meng. Study on arc behavior and droplet transfer mechanisms under complex paths[J]. Advances in Manufacturing, 2026, 14(1): 172-188.
[3]	Yan-Jun Lu, Ming-Rong Guo, Yong-Qi Dai, Qiang Wang, Hu Luo. Experimental study on ultrasonic vibration-assisted grinding of quartz glass microchannel[J]. Advances in Manufacturing, 2025, 13(4): 701-717.
[4]	Tong Zhu, Carman K. M. Lee, Sandy Suet To. Data-driven model for predicting machining cycle time in ultra-precision machining[J]. Advances in Manufacturing, 2025, 13(4): 831-846.
[5]	Bo-Han Feng, Bo-Yan Li, Xin-Ting Jiang, Qi Zhou, You-Yi Bi. BRMPNet: bidirectional recurrent motion planning networks for generic robotic platforms in smart manufacturing[J]. Advances in Manufacturing, 2025, 13(3): 477-492.
[6]	Kai-Xiong Hu, Kai Guo, Wei-Dong Li, Yang-Hui Wang. Temperature evolution prediction for laser directed energy deposition enabled by finite element modelling and bi-directional gated recurrent unit[J]. Advances in Manufacturing, 2025, 13(3): 668-687.
[7]	Toa Pečur, Frédéric Bosché, Gabrielis Cerniauskas, Frank Mill, Andrew Sherlock, Nan Yu. Prototype pipeline modelling using interval scanning point clouds[J]. Advances in Manufacturing, 2025, 13(2): 444-461.
[8]	Ana C. Martinez, Alexis Maurel, Bharat Yelamanchi, A. Alec Talin, Sylvie Grugeon, Stéphane Panier, Loic Dupont, Ana Aranzola, Eva Schiaffino, Sreeprasad T. Sreenivasan, Pedro Cortes, Eric MacDonald. Combining 3D printing of copper current collectors and electrophoretic deposition of electrode materials for structural lithium-ion batteries[J]. Advances in Manufacturing, 2025, 13(2): 462-475.
[9]	Xiao-Fei Lei, Wen-Feng Ding, Biao Zhao, Chuan Qian, Zi-Ang Liu, Qi Liu, Dong-Dong Xu, Yan-Jun Zhao, Jian-Hui Zhu. Grinding of particle-reinforced metal matrix composite materials: current status and prospects[J]. Advances in Manufacturing, 2025, 13(1): 43-68.
[10]	John O'Hara, Feng-Zhou Fang. Design and fabrication of an aluminium oxide cutting insert with an internal cooling channel[J]. Advances in Manufacturing, 2024, 12(4): 619-641.
[11]	Ming-Ming Lu, Ya-Kun Yang, Jie-Qiong Lin, Yong-Sheng Du, Xiao-Qin Zhou. Research progress of magnetorheological polishing technology: a review[J]. Advances in Manufacturing, 2024, 12(4): 642-678.
[12]	Shu-Lian Xie, Feng Xue, Wei-Min Zhang, Jia-Wei Zhu, Zi-Wei Jia. Multi-factor integrated configuration model and three-layer hybrid optimization algorithm framework: turnkey project-oriented rapid manufacturing system configuration[J]. Advances in Manufacturing, 2024, 12(4): 698-725.
[13]	Javid Sharifi, Vlad Paserin, Haniyeh (Ramona) Fayazfar. Sustainable direct metallization of 3D-printed metal-infused polymer parts: a novel green approach to direct copper electroless plating[J]. Advances in Manufacturing, 2024, 12(4): 784-797.
[14]	Sen-Lin Wang, Li-Chao Zhang, Chao Cai, Ming-Kai Tang, Si Chen, Jiang Huang, Yu-Sheng Shi. Universal and efficient hybrid modeling and direct slicing method for additive manufacturing processes[J]. Advances in Manufacturing, 2024, 12(2): 300-316.
[15]	Bao-Ri Zhang, Yong-Hua Shi. A novel weld-pool-length monitoring method based on pixel analysis in plasma arc additive manufacturing[J]. Advances in Manufacturing, 2024, 12(2): 335-348.

Proposition of atomic and close-to-atomic scale manufacturing

Proposition of atomic and close-to-atomic scale manufacturing

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价