Research progress of magnetorheological polishing technology: a review

doi:10.1007/s40436-024-00490-4

Advances in Manufacturing ›› 2024, Vol. 12 ›› Issue (4): 642-678.doi: 10.1007/s40436-024-00490-4

• • 上一篇

Research progress of magnetorheological polishing technology: a review

Ming-Ming Lu¹, Ya-Kun Yang¹, Jie-Qiong Lin¹, Yong-Sheng Du¹, Xiao-Qin Zhou²

1. School of Mechanical and Electrical Engineering, Changchun University of Technology, Changchun, 130012, People's Republic of China;
2. School of Mechanical and Aerospace Engineering, Jilin University, Changchun, 130012, People's Republic of China

收稿日期:2023-04-25 修回日期:2023-10-16 发布日期:2024-12-06
通讯作者: Jie-Qiong Lin,E-mail:linjieqiong@ccut.edu.cn E-mail:linjieqiong@ccut.edu.cn
作者简介:Ming-Ming Lu received a doctorate degree from Jilin University in 2014. He is now a master tutor and doctoral tutor at the School of Mechatronic Engineering, Changchun University of Technology. His research interests include micro-nano and ultraprecision manufacturing technology, vibration-assisted processing technology, etc. Ya-Kun Yang was born in Kaifeng, Henan province, China in 1996. He is currently a doctoral student majoring in mechanical engineering at Changchun University of Technology. His main research includes but is not limited to precision machining and inspection technology, difficult-to-machine material processing, Magnetor-heological polishing technology. Jie-Qiong Lin was born in Changchun, Jilin Province. She is now the vice president of Changchun University of Technology, graduate supervisor and doctoral supervisor. Received a doctorate degree from Jilin University in 2005, mainly engaged in micro-nano and ultra-precision manufacturing, large-area laser processing, precision polishing and error compensation. Yong-Sheng Du was born in Jilin, Jilin province, China in 1996. He received the B.S. degree in Mechanical Engineering from Changchun University of Technology, China, in 2015. He is currently a doctoral student majoring in mechanical engineering at Changchun University of Technology. His main research includes but is not limited to precision machining and inspection technology, difficultto-machine material processing, composite material processing and model simulation. Xiao-Qin Zhou is now a master tutor and doctoral tutor at the School of Mechanical and Aerospace Engineering, Jilin University. His research interests include micro-nano and ultraprecision manufacturing technology, vibration-assisted processing technology, etc.
基金资助:
This work was supported by the National Natural Science Foundation of China (Grant No. U19A20104), the Natural Science Foundation of Jilin Province (Grant No. YDZJ202201ZYTS534), Jilin Provincial International Cooperation Key Laboratory for High-Performance Manufacturing and Testing (Grant No.20220502003GH).

Research progress of magnetorheological polishing technology: a review

Ming-Ming Lu¹, Ya-Kun Yang¹, Jie-Qiong Lin¹, Yong-Sheng Du¹, Xiao-Qin Zhou²

1. School of Mechanical and Electrical Engineering, Changchun University of Technology, Changchun, 130012, People's Republic of China;
2. School of Mechanical and Aerospace Engineering, Jilin University, Changchun, 130012, People's Republic of China

Received:2023-04-25 Revised:2023-10-16 Published:2024-12-06
Contact: Jie-Qiong Lin,E-mail:linjieqiong@ccut.edu.cn E-mail:linjieqiong@ccut.edu.cn
Supported by:
This work was supported by the National Natural Science Foundation of China (Grant No. U19A20104), the Natural Science Foundation of Jilin Province (Grant No. YDZJ202201ZYTS534), Jilin Provincial International Cooperation Key Laboratory for High-Performance Manufacturing and Testing (Grant No.20220502003GH).

摘要/Abstract

摘要： As an essential link in ultra-precision machining technology, various new surface polishing technologies and processes have always attracted continuous in-depth research and exploration by researchers. As a new research direction of ultra-precision machining technology, magnetorheological polishing technology has become an important part. The polishing materials and magnetorheological fluids involved in the process of magnetorheological polishing are reviewed. The polishing principle, equipment development, theoretical research and process research of magnetorheological polishing technologies, such as the wheel-type, cluster-type, ball-type, disc-type and other types, derived from the magnetorheological polishing process, are reviewed. The above magnetorheological polishing technologies are analyzed and compared from the perspective of processing accuracy, processing efficiency and application range. The curvature adaptive magnetorheological polishing technology with a circulatory system is proposed to achieve high efficiency and high-quality polishing.

The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-024-00490-4

关键词: Ultra-precision machining, Magnetorheological polishing, Research progress, Curvature adaptive, Development trend

Abstract: As an essential link in ultra-precision machining technology, various new surface polishing technologies and processes have always attracted continuous in-depth research and exploration by researchers. As a new research direction of ultra-precision machining technology, magnetorheological polishing technology has become an important part. The polishing materials and magnetorheological fluids involved in the process of magnetorheological polishing are reviewed. The polishing principle, equipment development, theoretical research and process research of magnetorheological polishing technologies, such as the wheel-type, cluster-type, ball-type, disc-type and other types, derived from the magnetorheological polishing process, are reviewed. The above magnetorheological polishing technologies are analyzed and compared from the perspective of processing accuracy, processing efficiency and application range. The curvature adaptive magnetorheological polishing technology with a circulatory system is proposed to achieve high efficiency and high-quality polishing.

The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-024-00490-4

Key words: Ultra-precision machining, Magnetorheological polishing, Research progress, Curvature adaptive, Development trend

Ming-Ming Lu, Ya-Kun Yang, Jie-Qiong Lin, Yong-Sheng Du, Xiao-Qin Zhou. Research progress of magnetorheological polishing technology: a review[J]. Advances in Manufacturing, 2024, 12(4): 642-678.

参考文献

[1] Dong K (2022) Interpretation of the “14th Five-Year Plan” intelligent manufacturing development plan and trend research. China Ind Inf Technol 1:24-29
[2] Xu H (2022) Vigorously develop high-end equipment manufacturing. China Electron News. https://doi.org/10.28065/n.cnki.ncdzb.2022.001097
[3] Huang KT, Gong H, Chen XB (2022) Study of ultra-precision turning path calculation of freeform surface with free contours. Int J Adv Manuf Technol 121:5451-5462
[4] Zhong YY, Dai YF, Xiao H et al (2021) Experimental study on surface integrity and subsurface damage of fused silica in ultra-precision grinding. Int J Adv Manuf Technol 115:4021-4033
[5] Zhang SJ, Zhou YP, Zhang HJ et al (2019) Advances in ultra-precision machining of micro-structured functional surfaces and their typical applications. Int J Mach Tool Manuf 142:16-41
[6] Zhu WL, Beaucamp A (2020) Compliant grinding and polishing: a review. Int J Mach Tool Manuf 158:103634. https://doi.org/10.1016/j.ijmachtools.2020.103634
[7] Yang YK, Wang ZK, Pang MH et al (2022) The effect of process parameters on chemical mechanical polishing of quartz glass. Int J Mod Phys B 36:2240032. https://doi.org/10.1142/S021797922240032X
[8] Yuan JL, Zhang FH, Dai YF et al (2010) Development research of science and technologies in ultra-precision machining field. Chin J Mech Eng 46(15):161-177
[9] Zhang J, Dai L, Wang F et al (2013) Restraint of mid-spatial-frequency error aspheric surface by small-tool adaptive polishing. Acta Opt Sin 33(8):202-208
[10] Xu J, Zou P, Kang D et al (2021) Theoretical and experimental study of bulge formation in laser polishing of 304 stainless steel. J Manuf Process 66:39-52
[11] Peng YF, Yang L, Liu XY (2022) Polishing process and progress of calcium fluoride. Aeronaut Manuf Technol 65(13):14-25
[12] Seo J (2021) A review on chemical and mechanical phenomena at the wafer interface during chemical mechanical planarization. J Mater Res 36:235-257
[13] Subramani K, Vasudevan K, Karthik K et al (2022) Insights of abrasive water jet polishing process characteristics and its advancements. Mater Today Proc 52(3):1113-1120
[14] Xiao H, Dai Y, Duan J et al (2021) Material removal and surface evolution of single crystal silicon during ion beam polishing. Appl Surf Sci 544(1):148954. https://doi.org/10.1016/J.APSUSC.2021.148954
[15] Yin SH, Deng ZM, Guo YF et al (2020) Magnetorheological polishing using large polishing tool excited by electromagnetic field for silicon carbide wafer. Surf Technol 49(10):309-315
[16] Lv HF (2010) Research on removing subsurface damage by using magnetorheological finishing technology. Dissertation, National University of Defense Technology
[17] Li SY, Peng XQ (2013) Basic theory and method of controllable compliant tools for optic elements manufacturing. J Mech Eng 49(17):1-9
[18] Shi F, Dai YF, Peng XQ et al (2010) Removal of subsurface damage in grinding by magnetorheological finishing. Opt Precis Eng 18(1):162-168
[19] Lv HF, Zheng ZW, Peng XQ et al (2010) Research on removing subsurface damage by using magnetorheological finishing technology. Aviat Precis Manuf Technol 46(4):20-23
[20] Lu MM, Zhuang XL, Zhou JK et al (2021) Distribution model and optimization design of cluster magnetorheological field. Manuf Technol Mach Tool 10:45-49
[21] Rabinow J (1948) The magnetic fluid clutch. Trans Am Inst Electr Eng 67(2):1308-1315
[22] Lu JY (2008) Research on inverted device for magnetorheological finishing. Dissertation, Harbin Institute of Technology
[23] Kordonski WI, Jacobs SD (1996) Magnetorheological finishing. Int J Mod Phys B 10:2837-2848
[24] Harris DC (2011) History of magnetorheological finishing. Proc SPIE 8016(4):561-566
[25] Li LX (2016) Study on the key techniques of magnetorheological finishing for large aspheric optics. Dissertation, University of Chinese Academy of Sciences
[26] Li Z (2016) Research on the key technology of combined magnetorheological finishing. Dissertation, Hunan University
[27] Golini D, Kordonski WI, Dumas P et al (1999) Magnetorheological finishing (MRF) in commercial precision optics manufacturing. Proc SPIE 3782:80-91
[28] Lei LG (2021) Research on magnetorheological polishing technology of pseudo-random trajectory based on parametric grid. Dissertation, Jilin University
[29] Li Y (2019) Study on the wear mechanism and suppression method of magnetorheological polishing wheel. Dissertation, China Academy of Engineering Physics
[30] QED Technologies Inc (2012) QED Championship date. QED Technologies, Rochester. https://qedmrf.com/
[31] Zhang F, Yu JC, Zhang XJ et al (1999) Magnetorheological finishing technology. Opt Precis Eng 7(5):1-8
[32] Zhang F, Zhang XJ, Yu JC et al (2000) Foundation of mathematics model of magnetorheological finishing. Opt Technol 26(2):190-192
[33] Zhang F, Pan SF, Zhang XJ et al (2004) Research on material removal of magnetorheological finishing. Opt Technol 27(6):522-523
[34] Zhang Y, Feng ZJ, Zhao GM (2004) Magnetorheological finishing tool and removal function. J Tsinghua Univ 44(2):190-193
[35] Peng XQ, Dai YF, Li SY (2004) Material removal model of magnetorheological finishing. J Mech Eng 40(4):67-70
[36] You WW, Peng XQ, Dai YF (2004) MR fluids for finishing use. Opt Precis Eng 12(3):330-334
[37] Dai YF, Shi F, Peng XQ et al (2010) Deterministic figuring in optical machining by magnetorheological finishing. Acta Opt Sin 30(1):198-205
[38] Beier M, Scheiding S, Gebhardt A et al (2013) Fabrication of high precision metallic freeform mirrors with magnetorheological finishing (MRF). Proc SPIE 8884:139-152
[39] Schinhaerl M, Rascher R, Stamp R et al (2007) Filter algorithm for influence functions in the computer controlled polishing of high-quality optical lenses. Int J Mach Tool Manuf 47(1):107-111
[40] Kim DW, Cho MW, Lee JW et al (2009) Ultra-precision polishing of Si3N4 ceramics using magnetorheological fluids and diamond abrasives. J Ceram Process Res 10(3):290-295
[41] Huang W, Zhang YF, Zheng YC et al (2014) Magnetorheological finishing machine and technique based on two-polishing-head. J Appl Opt 35(3):494-499
[42] Yan QS, Tang AJ, Lu JB et al (2008) Development of a new plate polishing technique with an instantaneous tiny-grinding wheel cluster based on magnetorheological effect. Adv Mater Res 53/54:155-160
[43] Singh AK, Jha S, Pandey PM (2011) Design and development of nanofinishing process for 3D surfaces using ball end MR finishing tool. Int J Mach Tool Manuf 51(2):142-151
[44] Singh AK, Jha S, Pandey PM (2012) Nano-finishing of a typical 3D ferromagnetic workpiece using ball end magnetorheological finishing process. Int J Mach Tool Manuf 63(4):21-31
[45] Niranjan M, Jha S, Kotnala RK (2014) Ball end magnetorheological finishing using bidisperse magnetorheological polishing fluid. Mater Manuf Process 29(4):487-492
[46] Su YR, Li D, Liu HN et al (2013) Experiment research of polishing capability of magnetorheological finishing with a small permanent magnet ball-end tool. Key Eng Mater 589/590:497-501
[47] Wang YQ, Yin SH, Huang H et al (2015) Magnetorheological polishing using a permanent magnetic yoke with straight air gap for ultra-smooth surface planarization. Precis Eng 40:309-317
[48] Li T, Xie MJ, Du WZ (2021) The necessity and development direction of ultra-precision machining are briefly discussed. Ind Heat 50(8):42-44
[49] Liu HN, Qin B, Wang YZ et al (2022) Interference analysis and ultra-precision grinding technology of hemispherical resonator curved surface machining. Diam Abras Eng 42(1):10-17
[50] Wang B, Zhang WL, Shi F et al (2022) Study on the repair technology of laser damage-fused silica optics based on the neural network method. Materials 15(15):5274. https://doi.org/10.3390/MA15155274
[51] Zhang WY (2020) Research status and application progress of biomedical metal materials. Met World 2020(1):21-27
[52] Kunal A, Anant KS (2020) Magnetorheological finishing of UHMWPE acetabular cup surface and its performance analysis. Mater Manuf Process 35(14):1631-1649
[53] Yan QS, Zhao Y, Liang ZB et al (2021) Study on cluster magnetorheological finishing of medical titanium alloy with dynamic magnetic fields. Surf Technol 50(09):322-332, 378
[54] Sun BY, Yu BJ, Tan HQ et al (2022) Magnetorheological finishing process of CoCrMo alloy. Surf Technol 51(10):310-320
[55] Chen BS, Zheng C, Huang DC (2021) Experimental study on magnetorheological polishing process of 316L stainless steel formed by SLM. Tool Eng 55(10):82-86
[56] Paswan SK, Aggarwal A, Singh AK (2022) Investigation of magnetorheological fluid-based finishing process for improving the functional performance of hydraulic cylinder. Proc Inst Mech Eng E J Process 236(3):824-837
[57] Singh M, Singh AK (2021) Magnetorheological finishing of copper cylindrical roller for its improved performance in printing machine. Proc Inst Mech Eng E J Process 235(1):103-115
[58] Tang YK (2017) Research on wear characteristic of fixed abrasive pad. Dissertation, Nanjing University of Aeronautics and Astronautics
[59] Zhang P, Yang JF, Qiu HD (2021) Material removal rate of double-faced mechanical polishing of 4H-SiC substrate. Int J Adv Manuf Technol 118:3989-3993
[60] Yang C, Zhang NW, Bai Y (2022) High-efficiency and high-quality combined polishing method of zinc selenide crystal. Infrared Laser Eng 51(9):37-42
[61] Peng XQ, Jiao FF, Chen HF et al (2011) Novel magnetorheological figuring of KDP crystal. Chin Opt Lett 9(10):102201. https://doi.org/10.3788/COL201109.102201
[62] Pan JS, Yan QS, Lu JB et al (2014) Cluster magnetorheological effect plane polishing technology. J Mech Eng 50(1):205-212
[63] Mahender KG, Dinakara D, Inder MC et al (2021) Experimental investigation and machine parameter optimization for nano finishing of fused silica using magnetorheological finishing process. Optik 226:165908. https://doi.org/10.1016/j.ijleo.2020.165908
[64] Pan JS, Zheng K, Yan QS et al (2020) Optimization study on magnetorheological fluid components and process parameters of cluster magnetorheological finishing with dynamic magnetic field for sapphire substrates. Smart Mater Struct 29(11):114009. https://doi.org/10.1088/1361-665X/abb988
[65] Jian VK, Ranjan P, Suri VK et al (2010) Chemo-mechanical magnetorheological finishing (CMMRF) of silicon for microelectronics applications. CIRP Ann Manuf Technol 59(1):323-328
[66] Sun SL, Lu JB, Yan QS (2021) Technological experiment of cluster magnetorheological finishing of InP wafer with dynamic magnetic fields. Lubr Eng 46(11):40-45
[67] Chen XJ (2021) Research on plasma-assisted cluster magnetorheological finishing of single crystal SiC wafe. Dissertation, Guangdong University of Technology
[68] Guo MJ, Luo H, Wang CB et al (2018) Experimental study on magnetorheological finishing using large polishing tool for zirconia ceramic plane. Surf Technol 4(7):28-34
[69] Xiao XL, Li GX, Mei HJ et al (2020) Polishing of silicon nitride ceramic balls by clustered magnetorheological finish. Micromachines 11(3):304. https://doi.org/10.3390/mi11030304
[70] Huang YP (2015) The development prospect of modern optical processing technology and industry. China High Tech Enterp 28:1-2
[71] Li XZ, Xu JK, Tong L et al (2021) Study on the influence of amplitude on ultrasonic assisted grinding of hard and brittle materials. Mater Sci Forum 1047:57-61
[72] You K, Yan G, Luo X et al (2020) Advances in laser assisted machining of hard and brittle materials. J Manuf Process 58:677-692
[73] Xiong H, Luo YP, Wang WC et al (2019) Effect of surfactants with different HLB values on settling stability of magnetorheological fluid. Funct Mater 50(12):12126-12131
[74] Shu LF, Ni L, Xiang BP et al (2021) Effect of nonionic surfactant on the stability of water-based magnetorheological polishing. J Magn Mater Devices 52(5):73-78
[75] Yang J, Yan H, Hu Z et al (2016) Viscosity and sedimentation behaviors of the magnetorheological suspensions with oleic acid/dimer acid as surfactants. J Magn Magn Mater 417:214-221
[76] Niu FH, Hu ZD, Yan H et al (2018) Rheological properties of magnetorheological suspensions with PMMA/oleic acid as surfactants. Chem Ind Eng Prog 37(5):1888-1895
[77] Song KH, Park BJ, Choi HJ (2009) Effect of magnetic nanoparticle additive on characteristics of magnetorheological fluid. IEEE Ttans Magn 45(10):4045-4048
[78] Piao SH, Chae HS, Choi HJ (2015) Carbonyl iron suspension with core-shell structured Fe₃O₄@ SiO₂ nanoparticle additives and its magnetorheological property. IEEE Trans Magn 51(11):1-4
[79] Guo QY, Wang J, Ouyang Q (2018) Effect of SiO₂ with different specific surface areas on rheological properties and sedimentation stability of magnetorheological fluid. Mater Mech Eng 42(10):8-12
[80] Xiao Q, Wang JQ, Jin LP (2022) Research progress of key technology and process of magnetorheological polishing. Mater Rep 36(07):65-74
[81] Zhu XL, Sun HM, Liu NN et al (2019) Effect of magnetorheological fluids with different volume fractions on shear properties. Sci Technol Eng 19(14):183-186
[82] Xiao LJ, Wang CP, Wei J et al (2017) Experimental analysis of shear properties of magnetorheological fluids under magnetic fields. J Mater Sci Eng 35(4):659-622, 688
[83] Ginder JM, Davis LC (1994) Shear stress in magnetorheological fluids: role of magnetic saturation. Appl Phys Lett 65(26):3410-3412
[84] Zhao PH, Li XG, Tong Y et al (2021) Effect of the interface between magnetic particles and carrier liquids on magnetorheological properties and sedimentation of magnetorheological fluids: a molecular dynamics simulation and experimental insights. J Mol Liq 342:117377. https://doi.org/10.1016/j.molliq.2021.117377
[85] Zhu YS, Gong XL, Li H et al (2006) Numerical analysis on shear yield stress of magnetorheological fluids. J China Univ Min Technol 35(7):498-503
[86] Li LX (2022) Magnetorheological effect and sedimentation stability of ionic liquid-modified silicone oil-based magnetorheological fluid. Dissertation, Dalian University of Technology
[87] Bai Y (2015) Preparation of MR polishing fluid and study on the stability of removal function. Dissertation, University of Chinese Academy of Sciences
[88] Bai Y, Zhang F, Deng WJ et al (2014) Preparation of magnetorheological polishing fluid and its polishing stability. Acta Opt Sin 34(4):185-192
[89] Markus S, Elmar P, Andreas G et al (2005) Comparison of different magnetorheological polishing fluids. SPIE 5965:596528. https://doi.org/10.1117/12.656430
[90] Li LX, Liu ZY, Xue DL et al (2018) Rapid fabrication of a lightweight 2 m reaction-bonded SiC aspherical mirror. Results Phys 10:903-912
[91] Li LX, Zheng LG, Deng WJ et al (2015) Optimized dwell time algorithm in magnetorheological finishing. Int J Adv Manuf Technol 81(5):833-841
[92] Shi F, Dai YF, Peng XQ et al (2009) Magnetorheological finishing for high-precision optical surface. Opt Precis Eng 17(8):1859-1864
[93] Wang F, Feng ZJ, Cheng HB (2006) Renewable magnetorheological finishing tool combined self-rotation and co-rotation movement. J Tsinghua Univ (Sci Technol) 2:184-186
[94] Shu LF (2022) Design and performance study of arm type magnetorheological polishing machine and magnetorheological polishing fluid. Dissertation, Southwest University of Science and Technology
[95] Miao CL, Shaffir SN, Lambropoulos JC et al (2009) Shear stress in magnetorheological finishing for glasses. Appl Opt 48(13):2585-2594
[96] Miao CL, Lambropoulos JC, Jacobs SD (2010) Process parameter effects on material removal in magnetorheological finishing of borosilicate glass. Appl Opt 49(10):1951-1963
[97] Sidpara A, Jain VK (2012) Theoretical analysis of forces in magnetorheological fluid based finishing process. Int J Mech Sci 56(1):50-59
[98] Liu J, Li X, Zhang Y et al (2020) Predicting the material removal rate (MRR) in surface magnetorheological finishing (MRF) based on the synergistic effect of pressure and shear stress. Appl Surf Sci 504:144492. https://doi.org/10.1016/j.apsusc.2019.144492
[99] Liu SW, Wang HX, Zhang QH et al (2020) Regionalized modeling approach of tool influence function in magnetorheological finishing process for aspherical optics. Optik 206:164368. https://doi.org/10.1016/j.ijleo.2020.164368
[100] Bai Y, Zhang X, Yang C et al (2022) Material removal model of magnetorheological finishing based on dense granular flow theory. Light Adv Manuf 3:1-10

Research progress of magnetorheological polishing technology: a review

Research progress of magnetorheological polishing technology: a review

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价