Dual phase titanium alloy hot forging process design: experiments and numerical modeling

doi:10.1007/s40436-015-0127-0

Abstract

Abstract: Titanium alloys are considered desirable materials when both good mechanical properties and weight reduction are required at the same time. This class of materials is widely used in those fields (aeronautics, aerospace) in which common steels and light-weight materials, e.g., aluminum alloys, are not able to satisfy all operative service conditions. During the last decade, forging of titanium alloys has attracted greater attention from both industrial and scientific/academic researchers because of their potential in providing a near net shaped part with minimal need for machining. In this paper, a numerical model of the forging sequences for a Ti-6Al-4V titanium alloy aerospace component is presented. The model was tested and validated against experimental forgings. The model is then applied to predict loads final microstructure and defects of an aeronautical component. In addition to metal flow and die stresses, microstructural transformations (α and β phases) are considered for the determination of proper process parameters. It is found that transformation from α/β to b phase during forging and reverse transformations in post-forge cooling needs to be considered in the computational model for reasonable prediction of forging loads and product properties.

Key words: Finite element method (FEM), Ti-6Al-4V, Hot forging, Phase prediction

A. Ducato, G. Buffa, L. Fratini, R. Shivpuri. Dual phase titanium alloy hot forging process design: experiments and numerical modeling[J]. Advances in Manufacturing, 2015, 3(4): 269-281.

TrendMD

References

1. Kuhlman GW (2005) Forging of titanium alloys. ASM handbook: metalworking. Bulk Forming 14A:331-353

2. Pishko R, Ripepi MA, Kuhlman GW et al (1987) Modeling of deformation and structure during conventional forging of titanium- alloys. J Metals 39(10):A2-A2

3. Boyer RR (1996) An overview on the use of titanium in the aerospace industry. Mat Sci Eng a-Struct 213(1-2):103-114

4. Baufeld B, Biest OVD, Gault R (2010) Additive manufacturing of Ti-6Al-4V components by shaped metal deposition: microstructure and mechanical properties. Mater Design 31:S106-S111

5. Park NK, Yeom JT, Na YS (2002) Characterization of deformation stability in hot forging of conventional Ti-6Al-4V using processing maps. J Mater Process Technol 130:540-545

6. Lutjering G, Williams JC (2003) Titanium matrix composites. Eng Mater Process 2003:313-328

7. Wang J, Fu P, Liu H et al (2012) Shrinkage porosity criteria and optimized design of a 100-ton 30Cr2Ni4MoV forging ingot. Mater Des 35:446-456

8. Bariani PF, Negro DT, Bruschi S (2004) Testing and modelling of material response to deformation in bulk metal forming. Ann Cirp 53(2):573-595

9. Astarita A, Testani C, Scherillo F et al (2014) Beta forging of a Ti6Al4V Component for aeronautic applications: microstructure evolution. Metallogr Microstruct Anal 3(6):460-467

10. Astarita A, Ducato A, Fratini L et al (2013) Beta forging of Ti-6Al-4V: microstructure evolution and mechanical properties. Key Eng Mater 554-557:359-371

11. Ducato A, Fratini L, Micari F (2013) Advanced numerical models for the thermo-mechanical-metallurgical analysis in hot forging processes. AIP Conf Proc 1532(3):3-14

12. Cai J, Li FG, Liu TY et al (2011) Constitutive equations for elevated temperature flow stress of Ti-6Al-4V alloy considering the effect of strain. Mater Des 32(3):1144-1151

13. Seshacharyulu T, Medeiros SC, Frazier WG et al (2000) Hot working of commercial Ti-6Al-4V with an equiaxed a-b microstructure: materials modeling considerations. Mater Sci Eng A 284(1-2):184-194

14. Semiatin SL, Goetz RL, Seetharaman V et al (1999) Cavitation and failure during hot forging of Ti-6Al-4V. Metall Mater Trans A 30(5):1411-1424

15. Hu ZM, Dean TA (2001) Aspects of forging of titanium alloys and the production of blade forms. J Mater Process Tech 111(1-3):10-19

16. Geijselaers HJM, Hue´tink H (2004) Thermo-mechanical analysis with phase transformations. AIP Conf Proc 712(1):1508-1513

17. Casotto S, Pascon F (2005) Thermo-mechanical-metallurgical model to predict geometrical distortions of rings during cooling phase after ring rolling operations. Int J Mach Tool Manu 45(6):657-664

18. Sha W, Malinov S (2009) Titanium alloys: modelling of microstructure, properties and applications. CRC Press, Woodhead

19. Boyer RF, Welsch G, Collings EW (1994) Materials properties handbook: titanium alloys. ASM international

20. Kim JH, Semiatin SL, Hwan Lee Y et al (2011) A self-consistent approach for modeling the flow behavior of the alpha and beta phases in Ti-6Al-4V. Metall Mater Trans A 42A(7):1805-1814

21. Semiatin SL, Montheillet F, Shen G et al (2002) Self-consistent modeling of the flow behavior of wrought alpha/beta titanium alloys under isothermal and nonisothermal hot-working conditions. Metall Mater Trans A 33(8):2719-2727

22. Ducato A, Fratini L, Cascia ML et al (2013) An automated visual inspection system for the classification of the phases of Ti-6Al-4V titanium alloy. In: Wilson R, Hancock E, Bors A, Smith W (eds) Computer analysis of images and patterns, vol 8048. Springer, Berlin Heidelberg, pp 362-369

23. Buffa G, Ducato A, Fratini L (2013) FEM based prediction of phase transformations during friction stir welding of Ti6Al4V titanium alloy. Mater Sci Eng A 581(10):56-65

24. Bruschi S, Buffa G, Ducato A et al (2015) Phase evolution in hot forging of dual phase titanium alloys: experiments and numerical analysis. J Manuf Process. doi:10.1016/j.jmapro.2014.12.001

25. Semiatin S, Knisley S, Fagin P et al (2003) Microstructure evolution during alpha-beta heat treatment of Ti-6Al-4V. Metall Mater Trans A 34(10):2377-2386

26. Seshacharyulu T,Medeiros S, FrazierWet al (2000)Hot working of commercial Ti-6Al-4V with an equiaxed α-β microstructure: materialsmodeling considerations.Mater SciEngA284(1):184-194

[1]	Ning Li, Yong-Jie Chen, Dong-Dong Kong. Multi-response optimization of Ti-6Al-4V turning operations using Taguchi-based grey relational analysis coupled with kernel principal component analysis [J]. Advances in Manufacturing, 2019, 7(2): 142-154.
[2]	Achilles Vairis, George Papazafeiropoulos, Andreas-Marios Tsainis. A comparison between friction stir welding, linear friction welding and rotary friction welding [J]. Advances in Manufacturing, 2016, 4(4): 296-304.
[3]	Ali Mamedov, Ismail Lazoglu. Micro ball-end milling of freeform titanium parts [J]. Advances in Manufacturing, 2015, 3(4): 263-268.
[4]	Nejah Tounsi, Tahany El-Wardany. Finite element analysis of chip formation and residual stresses induced by sequential cutting in side milling with microns to submicron uncut chip thickness and finite cutting edge radius [J]. Advances in Manufacturing, 2015, 3(4): 309-322.
[5]	A. P. Tiwary,B. B. Pradhan,B. Bhattacharyya. Application of multi-criteria decision making methods for selection of micro-EDM process parameters [J]. Advances in Manufacturing, 2014, 2(3): 251-258.
[6]	Satyanarayana Kosaraju Venu Gopal Anne. Optimal machining conditions for turning Ti-6Al-4V using response surface methodology [J]. Advances in Manufacturing, 2013, 1(4): 329-339.