Investigation into material removal mechanism of high-volume-fraction SiCp/Al composite by fast ED milling

doi:10.1007/s40436-025-00575-8

Abstract

Abstract: High-volume-fraction SiC particle-reinforced aluminum (SiCp/Al) metal matrix composites (MMCs) are widely utilized in the electronic packaging of aerospace equipment because of their low density and high thermal conductivity. However, the extremely high hardness of SiC and compact structure of electronic packaging components pose significant challenges to conventional manufacturing techniques. Severe tool wear can reduce the processing efficiency and increase the manufacturing costs. Therefore, this work introduces a fast electrical discharge (ED) milling approach for machining high-volume-fraction SiCp/Al MMCs. This method was successfully applied to the fabrication of gas-film holes. Nevertheless, Ni-based superalloys differ significantly from SiCp/Al, and their material-removal mechanisms and machining capabilities represent core knowledge gaps. Consequently, this study employed an observation setup based on a high-speed camera to capture the gap discharge phenomenon and analyze the machined surfaces and generated debris. This analysis revealed the material-removal processes and mechanisms under two processing conditions with pulse durations of 50 μs and 500 μs. Additionally, the capability of fast ED milling to process high-volume-fraction SiCp/Al MMCs was initially verified through sample machining. The experimental results demonstrated that this method could create parts with complex and precise geometries, achieving satisfactory results in terms of machining accuracy and surface quality. Dimensional errors could be controlled within ± 50 μm, and the average surface roughness was less than 3 μm.

The full text can be downloaded at https://doi.org/10.1007/s40436-025-00575-8

Key words: SiC particle-reinforced aluminum (SiCp/Al), Material-removal mechanism, Gap discharge phenomena, Fast electrical discharge (ED) milling

Jun-Cheng Lu, Jian Wang, Qiang Gao, Qian Zheng, Yi-Fan Lu, Ya-Ou Zhang, Wan-Sheng Zhao. Investigation into material removal mechanism of high-volume-fraction SiCp/Al composite by fast ED milling[J]. Advances in Manufacturing, 2026, 14(2): 397-415.

TrendMD

References

[1] Mohn WR, Vukobratovich D (1998) Recent applications of metal matrix composites in precision instruments and optical systems. J Mater Eng 10(3):225-235
[2] Cui Y, Wang LF, Ren JY (2008) Multi-functional SiC/Al composites for aerospace applications. Chin J Aeronaut 21(6):578-584
[3] Occhionero MA, Hay RA, Adams RW et al (1999) Aluminum silicon carbide (AlSiC) thermal management packaging for high density packaging applications. Proc SPIE-Int Soc Opt Eng 1(6):34-39
[4] Zhang XC, Li XJ, Chi FH et al (2024) Synergistic enhancement of modulus and ductility in Mg matrix composites: a new strategy for GNPs&MgOnp and SiCp hybrid reinforcement. Compos Part A-Appl S 187:108448. https://doi.org/10.1016/j.compositesa.2024.108448
[5] Liu DW, Li CH, Xu PM et al (2024) SiCp/Al composites from conventional to empowered machining: mechanisms and processability. Compos Struct 346:118433. https://doi.org/10.1016/j.compstruct.2024.118433
[6] Dandekar CR, Shin YC (2012) Modeling of machining of composite materials: a review. Int J Mach Tool Manu 57:102-121
[7] Gao T, Xu PM, Wang W (2024) Force model of ultrasonic empowered minimum quantity lubrication grinding CFRP. Int J Mech Sci 280:109522. https://doi.org/10.1016/j.ijmecsci.2024.109522
[8] Zhou YG, Liu J et al (2024) Study on the removal mechanism and milling quality of helical milling hole of SiCp/Al composites. J Manuf Process 109:379-393
[9] Du YS, Lu MS, Lin JQ et al (2024) Investigation on machinability of SiCp/Al composites under the synergistic effect of pulsed laser assisted and ultrasonic elliptical vibration cutting. J Mater Process Tech 332:118561. https://doi.org/10.1016/j.jmatprotec.2024.118561
[10] Sheng PY, Chen Y, Sun W et al (2024) Investigation on cutting deformation behavior of Al/SiCp composites considering particle feature distributions. J Manuf Process 119:204-223
[11] Occhionero MA, Adams RW (2005) AlSiC, and AlSiC hybrid composites for flip chips, optoelectronics, power, and high brightness LED thermal management solutions. In: 2005 IEEE 6th international conference on electronic packaging technology, Shenzhen, China, pp 1-5 https://doi.org/10.1109/ICEPT.2005.1564720
[12] Chen JP, Gu L, He GJ (2020) A review on conventional and nonconventional machining of SiC particle-reinforced aluminium matrix composites. Adv Manuf 8:279-315
[13] Bushlya V, Lenrick F, Gutnichenko O (2017) Performance and wear mechanisms of novel superhard diamond and boron nitride based tools in machining Al-SiCp metal matrix composite. Wear 376/377:152-164
[14] Xiang JF, Xie LJ, Gao FN et al (2018) Diamond tools wear in drilling of SiCp/Al matrix composites containing copper. Ceram Int 44(5):5341-5351
[15] Du JG, Zhang HZ, He WB et al (2019) Simulation and experimental study on surface formation mechanism in machining of SiCp/Al composites. Appl Compos Mater 26:29-40
[16] Yu WW, Chen J, Ming WW et al (2021) Experimental and FEM study of cutting mechanism and damage behavior of ceramic particles in orthogonal cutting SiCp/Al composites. Ceram Int 47:7183-7194
[17] Bai W, Roy A, Sun RL et al (2019) Enhanced machinability of SiC reinforced metal-matrix composite with hybrid turning. J Mater Process Technol 268:149-161
[18] Wang ZY, He YJ, Yu TB (2022) Surface quality and milling force of SiCp/Al ceramic for ultrasonic vibration-assisted milling. Ceram Int 48(22):33819-33834
[19] Zhao GL, Hu MS, Li L et al (2020) Enhanced machinability of SiCp/Al composites with laser-induced oxidation assisted milling. Ceram Int 46(11):18592-18600
[20] Zhao GL, Mao PC, Li L et al (2020) Micro-milling of 65 vol% SiCp/Al composites with a novel laser-assisted hybrid process. Ceram Int 46(16):26121-26128
[21] Peng PC, Xiang DH, Li YQ et al (2022) Experimental study on laser assisted ultrasonic elliptical vibration turning (LA-UEVT) of 70% SiCp/Al composites. Ceram Int 48(22):33538-33552
[22] Guo S, Lu SX, Zhang B et al (2022) Surface integrity and material removal mechanisms in high-speed grinding of Al/SiCp metal matrix composites. Int J Mach Tool Manu 178:103906. https://doi.org/10.1016/j.ijmachtools.2022.103906
[23] Chen JP, Gu L, Zhu YM et al (2018) High efficiency blasting erosion arc machining of 50 vol.% SiC/Al matrix composites. P I Mech Eng B-J Eng 232(12):2226-2235
[24] Zhang Z, Zhang Y, Lin LQ (2021) Study on productivity and aerosol emissions of magnetic field-assisted EDM process of SiCp/Al composite with high volume fractions. J Clean Prod 292:126018. https://doi.org/10.1016/j.jclepro.2021.126018
[25] Gao X, Li JC, Xing QX et al (2022) Research on ultrasonic vibration-assisted electrical discharge machining SiCp/Al composite. Int J Adv Manuf Tech 121:2095-2113
[26] Wang J, Xi XC, Chu HY et al (2022) Experimental and numerical investigation into material removal mechanism of fast ED-milling. Int J Adv Manuf Technol 121:4885-4904
[27] Wang J, Xi XC, Ma JY et al (2023) Study on material removal mechanism and control strategy of multi-axis fast ED-milling. J Manuf Process 101:354-370
[28] Lin M, Zhou Y, Zhong MJ et al (2014) Molten metal and water direct contact interaction research-II. Numerical analysis. Ann Nucl Energy 70:256-265
[29] Wang JT, Li MH, Chen B et al (2020) Experimental study of the molten tin column impacting on the cooling water pool. Ann Nucl Energy 143:107464. https://doi.org/10.1016/j.anucene.2020.107464
[30] Wang CX, Wang CJ, Chen B et al (2020) Comparative study of water droplet interactions with molten lead and tin. Eur J Mech B-Fluid 80:157-166
[31] Wang CX, Wang CJ, Chen B et al (2021) Fragmentation regimes during the thermal interaction between molten tin droplet and cooling water. Int J Heat Mass Tran 166:120782. https://doi.org/10.1016/j.ijheatmasstransfer.2020.120782
[32] Tong HT, Zuo R, Qiu D et al (2021) Interfacial reaction behavior and evolution mechanism at a preoxidized SiC_o_x/Al interface. J Mater Res Technol 15:1100-1114
[33] Guo BS, Chen B, Zhang XM et al (2018) Exploring the size effects of Al₄C₃ on the mechanical properties and thermal behaviors of Al-based composites reinforced by SiC and carbon nanotubes. Carbon 135:224-235
[34] Deng ZY, Ferreira JMF, Sakka Y (2010) Hydrogen-generation materials for portable applications. J Am Ceram Soc 91(12):3825-3834
[35] Deng ZY, Ferreira JMF, Tanaka Y et al (2007) Physicochemical mechanism for the continuous reaction of γ-Al₂O₃-modified aluminum powder with water. J Am Ceram Soc 90(5):1521-1526
[36] Henry RE, Epstein M, Fauske HK (2015) The magnitude of combined physical and chemical explosions: a mechanism for a steam-metal chemical explosion with highly reactive metals. Nucl Sci Eng 180(3):312-334
[37] Kar S, Patowari PK (2018) Electrode wear phenomenon and its compensation in micro electrical discharge milling: a review. Mater Manuf Process 33(14):1491-1517
[38] Liu JW, Cheng K, Ding H et al (2019) Realization of ductile regime machining in micro-milling SiCp/Al composites and selection of cutting parameters. P I Mech Eng C-J Mec 233(12):4336-4347
[39] Hu SG, Wang XM, Gao T et al (2024) Effects of ultrasonic nanolubrication on milling performance and surface integrity of SiCp/Al composites. Int J Adv Manuf Technol 135:4865-4878
[40] Pei HQ, Wang JJ, Li Z et al (2021) Oxidation behavior of recast layer of air-film hole machined by EDM technology of Ni-based single crystal blade and its effect on creep strength. Surf Coat Technol 419:127285. https://doi.org/10.1016/j.surfcoat.2021.127285
[41] Paswan K, Sharma S, Dwivedi SP et al (2023) An analysis of microstructural morphology, surface topography, surface integrity, recast layer, and machining performance of graphene nanosheets on Inconel 718 superalloy: investigating the impact on EDM characteristics, surface characterizations, and optimization. J Mater Res Technol 27:7138-7158
[42] Lu SJ, Li ZQ, Zhang JJ et al (2022) Coupled effect of tool geometry and tool-particle position on diamond cutting of SiCp/Al. J Mater Process Technol 303:117510. https://doi.org/10.1016/j.jmatprotec.2022.117510
[43] Wang M, Zheng ZD, Wu ZP et al (2023) Investigation on the machinability of SiCp/Al composite by in-situ laser assisted diamond cutting. J Mater Process Technol 318:118044. https://doi.org/10.1016/j.jmatprotec.2023.118044