Progress of remanufacturing engineering and future technology

doi:10.1007/s40436-013-0003-8

Abstract

Abstract: After development for decades, abroad remanufacturing has formed a complete industrial system. At present, the research emphases are on marking logistics management and market cultivation theory of remanufacturing products, and so on. The Chinese remanufacturing starts fairly late. After 10 years of development, it formed a remanufacturing mode with Chinese characteristics that is sustained by high-tech industries, using the surface engineering
technology to restore the size and improve properties, and combining manufacturing, study and research together. The remanufacturing mode is not only circular but also economic. With the development of science and technology, future remanufacturing technology will break the previous limits, explore and understand the limits of micro machining. It will carry out the waste product remanufacturing in the micro-nano scale, and extend the remanufacturing industry to a more broad space.

Key words: Sustainable development , Remanufacturing industry , Surface engineering , , Micro–nano machining

Bin-Shi Xu. Progress of remanufacturing engineering and future technology[J]. Advances in Manufacturing, 2013, 1(1): 8-12.

TrendMD

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: https://www.aim.shu.edu.cn/EN/10.1007/s40436-013-0003-8

https://www.aim.shu.edu.cn/EN/Y2013/V1/I1/8

1. Xu BS, Liu SC, Li RH et al (2004) Basic approach and developmental foreground study of resource recovery for used electromechanic products. China Surf Eng 17(2):1–6

2. Ji KS (2001) Cycle economic theory and application. Anhui Science and Technology Publishing House, Hefei

3. Xu BS, Ma SN, Liu SC et al (2001) Surface engineering and remanufacturing. J Tongji Univ 9:1085–1091

4. Xu BS, Zhang W, Ma SN et al (1999) Face the twenty one century remanufacturing. China Awards Sci Technol 4:1–4

5. Chen XY, Liang GQ (2006) America remanufacturing and our study review. World Technol Study Dev 6(28):7–9

6. Hua Y, Wu YW, Jiang HN et al (2009) Overviews on the features of the remanufacturing mechanics products and the current remanufacturing technologies. Group Technol Prod Mod

26(2):1–8

7. Zhu KY. Car remanufacturing differs obviously and need time to remove. China Automobile Newspaper 11 Aug 2006 (2)

8. Xu BS (2007) Remanufacturing and cycle economic. Science Press, Beijing

9. Xu BS, Zhu S, Ma SN et al (2003) Construct and development of equipment remanufacture engineering specialty. China Surf Eng 16(3):1–6

10. China Weapon Industry 210 Graduate School. 2010 and later America National Defence Manufacturing Industry. Beijing: China Weapon Industry 210 Graduate School, 1999
11. Xu BS, Liu SC, Shi PJ (2008) The frontier issues of development and industrialization of remanufacturing engineering. China Surf Eng 21(1):1–5

12. Margatete AS (2007) A critical assessment of motives for product recovery: The case of engine remanufacturing. J Clean Prod 15:1147–1157

13. Table KN, Gupta SM (1997) Disassembly of multiple product structures. Comput Ind Eng 32(4):49–61

14. van der Laan EA, de Brito MP (2003) Managing product returns: the role of forecasting. In: Dekker R, Fleischmann M et al (eds) Reverse logistics: quantitative models for closed-loop supply chains. Springer, Germany

15. Johan O¨ , Erik S, Mats B (2009) Product life-cycle implications for remanufacturing strategies. J Clean Prod 17:999–1009

16. Lu ZQ, Nathalie B (2007) A facility location model for logistics systems including reverse flows: the case of remanufacturing activities. Comput Oper Res 34:299–323
17. Xu BS, Zhang W (1999) Modern manufacturing science—21st century remanufacturing engineering technology and theory. In: National natural science fund committee mechanics subject first field paper corpus, Guangzhou, China, 1999

18. Xu BS, Zhang ZX (1999) Surface engineering and remanufacturing technology. In: International conference on advanced manufacturing technology, Xi’an, China, 1999

19. Li SL (2010) Remanufacturing industry still needs to cross a few thresholds. Resour Recycl 2:28–30

20. Xu BS (2006) Equipment remanufacturing and tribology study. In: Country tribology conference thesis corpus, 2006

21. Xu BS (1999) Surface engineering technology and theory. National Defense Industry Press, Beijing

22. Zhao BJ, Wang Y, Zhang YF (2007) The principle and characteristic and application of nano-fabrication technology. Nanosci Nanotechnol 4(3):44–49

23. Zhang WY, Hou SZ (2011) Advances in nano-machining technology. Nanosci Nanotechnol 8(4):68–71

[1]	A. P. Tiwary,B. B. Pradhan,B. Bhattacharyya. Application of multi-criteria decision making methods for selection of micro-EDM process parameters [J]. Advances in Manufacturing, 2014, 2(3): 251-258.
[2]	Xin-Hua Yi,Xiao-Min Cheng,Feng-Lian Niu,Hong-Chao Fan. CFD simulation of micro-particle trapping under water tweezers [J]. Advances in Manufacturing, 2014, 2(3): 259-264.
[3]	Min Jiang,Li-Na Chen,Jin He,Guang-Yao Chen,Chong-He Li,Xiong-Gang Lu. Effect of controlled rolling/controlled cooling parameters on microstructure and mechanical properties of the novel pipeline steel [J]. Advances in Manufacturing, 2014, 2(3): 265-274.
[4]	Marius Spo¨ttl,Hardy Mohrbacher. Laser-based manufacturing concepts for efficient production of tailor welded sheet metals [J]. Advances in Manufacturing, 2014, 2(3): 193-202.
[5]	Lapo Chirici,Ke-Sheng Wang. Tackling the storage problem through genetic algorithms [J]. Advances in Manufacturing, 2014, 2(3): 203-211.
[6]	Pierre Coddet,Han-lin Liao,Christian Coddet. A review on high power SOFC electrolyte layer manufacturing using thermal spray and physical vapour deposition technologies [J]. Advances in Manufacturing, 2014, 2(3): 212-221.
[7]	V. B. Saputra,S. K. Ong,A. Y. C. Nee. Optimum calibration of a parallel kinematic manipulator using digital indicators [J]. Advances in Manufacturing, 2014, 2(3): 222-230.
[8]	Yong-Ze Yu,Lu-Lu Zheng,Hai-Ping Chen,Wei-Hua Chen,Qing-Xi Hu. Fabrication of hierarchical polycaprolactone/gel scaffolds via combined 3D bioprinting and electrospinning for tissue engineering [J]. Advances in Manufacturing, 2014, 2(3): 231-238.
[9]	Pushparajah Rajaguru,Hua Lu,Chris Bailey. Application of nonlinear fatigue damage models in power electronic module wirebond structure under various amplitude loadings [J]. Advances in Manufacturing, 2014, 2(3): 239-250.
[10]	Wladimir Bodrow. The dynamic of professional knowledge utilized in software applications for process controlling [J]. Advances in Manufacturing, 2014, 2(2): 173-178.
[11]	Rishad Rayyaan ? Yi Wang ? Richard Kennon. Ontology-based interoperability solutions for textile supply chain [J]. Advances in Manufacturing, 2014, 2(2): 97-105.
[12]	Ke-Sheng Wang. Intelligent and integrated RFID (II-RFID) system for improving traceability in manufacturing [J]. Advances in Manufacturing, 2014, 2(2): 106-120.
[13]	Alemu Moges Belay ? Torgeir Welo ?Petri Helo. Approaching lean product development using system dynamics:investigating front-load effects [J]. Advances in Manufacturing, 2014, 2(2): 130-140.
[14]	B?rge Sj?bakk ? Maria Kollberg Thomassen ?Erlend Alfnes. Implications of automation in engineer-to-order production:a case study [J]. Advances in Manufacturing, 2014, 2(2): 141-149.
[15]	Xue-Hua Sun ? Xue-Jian Chu ? Zhong-Dai Wu. Incentive regulation of banks on third party logistics enterprises in principal-agent-based inventory financing [J]. Advances in Manufacturing, 2014, 2(2): 150-157.

Progress of remanufacturing engineering and future technology

PDF

Knowledge

Abstract

Cite this article

share this article

Related Articles 15

Recommended Articles

Metrics

Comments