Effect of reducing agents on the structure of zinc oxide under microwave irradiation

doi:10.1007/s40436-013-0020-7

Abstract

Abstract: Zinc oxide was synthesized from zinc sulphate using different reducing agents under microwave irradiation.The influence of sodium borohydride, hydrazine
hydrate and urea on the shape and size of the products were investigated by scanning electron microscopy (SEM) and X- ray diffraction (XRD). SEM showed the nano-sized spherical and rectangular shaped structures in case of sodium borohydride and hydrazine hydrate, whereas micro-sized hexagonal structures were formed in case of urea under the same irradiation power. The reducing agents played an important role in forming the various structures.
Thus different shapes and size of structures were produced by only varying the reducing agent, which had wide applications in various fields.

Key words: Zinc oxide , , Microwave , Sodium borohydride , Hydrazine hydrate , Urea

Monica Debbarma,Soma Das,Mitali Saha. Effect of reducing agents on the structure of zinc oxide under microwave irradiation[J]. Advances in Manufacturing, doi: 10.1007/s40436-013-0020-7.

TrendMD

References

1. Bitenc M, Orel ZC (2009) Synthesis and characterization of crystalline hexagonal bipods of zinc oxide. Mater Res Bull 44:381–387

2. Peiro AM, Ravirajan P, Govender K et al (2006) Hybrid polymer/metal oxide solar cells based on ZnO columnar structures.J Mater Chem 16:2088–2096

3. Srikanth CK, Jeevanandam P (2009) Effect of anion on the homogeneous precipitation of precursors and their thermal decomposition to zinc oxide. J Alloy Compd 486(1–2):677–684

4. Ada K, Goekgoez M, Oenal M et al (2008) Preparation and characterization of a ZnO powder with the hexagonal plate particles.Powder Technol 181:285–291

5. Cheng C, Liu B, Yang H et al (2009) Hierarchical assembly of ZnO nanostructures on SnO2 backbone nanowires: low-temperature hydrothermal preparation and optical properties. ACS Nano 3:3069–3076

6. Baruah S, Dutta J (2009) Hydrothermal growth of ZnO nanostructures.Sci Technol Adv Mater 10(1):013001. doi:10.1088/1468-6996/10/1/013001

7. Ram SDG, Kulandainathan MA, Ravi G (2010) On the study of pH effects in the microwave enhanced rapid synthesis of nano-ZnO. Appl Phys A 99:197–203

8. Lima SAM, Cremona M, Davolos MR et al (2007) Electroluminescence of zinc oxide thin-films prepared via polymeric precursor and via sol-gel methods. Thin Solid Films 516:165–169

9. Music S, Popovic S, Maljkovic M et al (2002) Influence of synthesis procedure on the formation and properties of zinc oxide. J Alloy Compd 347:324–332

10. Peiro AM, Domingo C, Peral J et al (2005) Nanostructured zinc oxide films grown from microwave activated aqueous solutions.Thin Solid Films 483:79–83

11. Jiang JY, Li YF, Tan SW et al (2010) Synthesis of zinc oxide nanotetrapods by a novel fast microemulsion-based hydrothermal method. Mater Lett 64:2191–2193

12. Mo M, Yu JC, Zhang LZ et al (2005) Self-assembly of ZnO nanorods and nanosheets into hollow microhemispheres and microspheres. Adv Mater 17:756–760

13. Wei A, Sun XW, Xu CX et al (2006) Growth mechanism of tubular ZnO formed in aqueous solution. Nanotechnology 17:1740–1744

14. Chen DR, Jiao XL, Cheng G (1999) Hydrothermal synthesis of zinc oxide powders with different morphologies. Solid State Commun 113:363–366

15. Lu CH, Yeh CH (2000) Influence of hydrothermal conditions on the morphology and particle size of zinc oxide powder. Ceram Int 26:351–357

16. He Y, Yang B, Cheng G (2004) On the oxidative coupling of methane with carbon dioxide over CeO/ZnO nanocatalysts. Catal Today 98:595–600

17. Glaspell G, Dutta P, Manivannan A (2005) A room-temperature and microwave synthesis of M-doped ZnO (M = Co, Cr, Fe, Mn& Ni). J Cluster Sci 16(4):523–526

18. Hamedani NF, Farzaneh F (2006) Synthesis of ZnO nanocrystals with hexagonal (wurtzite) structure in water using microwave irradiation. J Sci Islam Repub Iran 17(3):231–234

19. Krishnakumar T, Pinna N, Kumari KP et al (2008) Microwaveassisted synthesis and characterization of tin oxide nanoparticles.Mater Lett 62(19):3437–3440

[1]	A. P. Tiwary,B. B. Pradhan,B. Bhattacharyya. Application of multi-criteria decision making methods for selection of micro-EDM process parameters [J]. Advances in Manufacturing, 2014, 2(3): 251-258.
[2]	Xin-Hua Yi,Xiao-Min Cheng,Feng-Lian Niu,Hong-Chao Fan. CFD simulation of micro-particle trapping under water tweezers [J]. Advances in Manufacturing, 2014, 2(3): 259-264.
[3]	Min Jiang,Li-Na Chen,Jin He,Guang-Yao Chen,Chong-He Li,Xiong-Gang Lu. Effect of controlled rolling/controlled cooling parameters on microstructure and mechanical properties of the novel pipeline steel [J]. Advances in Manufacturing, 2014, 2(3): 265-274.
[4]	Marius Spo¨ttl,Hardy Mohrbacher. Laser-based manufacturing concepts for efficient production of tailor welded sheet metals [J]. Advances in Manufacturing, 2014, 2(3): 193-202.
[5]	Lapo Chirici,Ke-Sheng Wang. Tackling the storage problem through genetic algorithms [J]. Advances in Manufacturing, 2014, 2(3): 203-211.
[6]	Pierre Coddet,Han-lin Liao,Christian Coddet. A review on high power SOFC electrolyte layer manufacturing using thermal spray and physical vapour deposition technologies [J]. Advances in Manufacturing, 2014, 2(3): 212-221.
[7]	V. B. Saputra,S. K. Ong,A. Y. C. Nee. Optimum calibration of a parallel kinematic manipulator using digital indicators [J]. Advances in Manufacturing, 2014, 2(3): 222-230.
[8]	Yong-Ze Yu,Lu-Lu Zheng,Hai-Ping Chen,Wei-Hua Chen,Qing-Xi Hu. Fabrication of hierarchical polycaprolactone/gel scaffolds via combined 3D bioprinting and electrospinning for tissue engineering [J]. Advances in Manufacturing, 2014, 2(3): 231-238.
[9]	Pushparajah Rajaguru,Hua Lu,Chris Bailey. Application of nonlinear fatigue damage models in power electronic module wirebond structure under various amplitude loadings [J]. Advances in Manufacturing, 2014, 2(3): 239-250.
[10]	Rishad Rayyaan ? Yi Wang ? Richard Kennon. Ontology-based interoperability solutions for textile supply chain [J]. Advances in Manufacturing, 2014, 2(2): 97-105.
[11]	Ke-Sheng Wang. Intelligent and integrated RFID (II-RFID) system for improving traceability in manufacturing [J]. Advances in Manufacturing, 2014, 2(2): 106-120.
[12]	Alemu Moges Belay ? Torgeir Welo ?Petri Helo. Approaching lean product development using system dynamics:investigating front-load effects [J]. Advances in Manufacturing, 2014, 2(2): 130-140.
[13]	B?rge Sj?bakk ? Maria Kollberg Thomassen ?Erlend Alfnes. Implications of automation in engineer-to-order production:a case study [J]. Advances in Manufacturing, 2014, 2(2): 141-149.
[14]	Xue-Hua Sun ? Xue-Jian Chu ? Zhong-Dai Wu. Incentive regulation of banks on third party logistics enterprises in principal-agent-based inventory financing [J]. Advances in Manufacturing, 2014, 2(2): 150-157.
[15]	Emrah Arica ? Daryl J. Powell. A framework for ICT-enabled real-time production planning and control [J]. Advances in Manufacturing, 2014, 2(2): 158-164.

Effect of reducing agents on the structure of zinc oxide under microwave irradiation

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments