The Co-based alloy/AISI 410 stainless steel dissimilar welded joint was fabricated by the electron beam welding (EBW) technique. The anomalous microstructure containing the element transition zone (ETZ) and/or core of tail-like zone (CTLZ) is in the weld metal (WM) adjacent to the fusion line. The melting temperature difference between the WM and AISI 410 steel, melt stirring effect and element diffusion can trigger the formation of such anomalous microstructure. In particular, the larger distance of the region in WM away from the fusion line, the smaller CTLZ and larger ETZ occurred. Compared with the fine and ellipsoidal precipitates in the as-welded CTLZ, a large number of chain-type clustered precipitates were detected in the CTLZ and ETZ interface after the aging treatment at 566 °C for 1 000 h. The element diffusion under elevated temperature in WM is regarded as the crucial factor for such anomalous microstructure evolution during the aging treatment.
The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-022-00396-z
Kai Ding
,
Yuan-Heng Zhang
,
Shang-Fei Qiao
,
Guan-Zhi Wu
,
Tao Wei
,
Xia Liu
,
Yu-Lai Gao
. Formation of the anomalous microstructure in the weld metal of Co-based alloy/AISI 410 stainless steel dissimilar welded joint[J]. Advances in Manufacturing, 2022
, 10(2)
: 250
-259
.
DOI: 10.1007/s40436-022-00396-z
1. Buffa G, De LM, Sciortino E et al (2016) Dissimilar titanium/aluminum friction stir welding lap joints by experiments and numerical simulation. Adv Manuf 4:287–295
2. Sahu PK, Kumari K, Pa S et al (2016) Hybrid fuzzy-grey-Taguchi based multi weld quality optimization of Al/Cu dissimilar friction stir welded joints. Adv Manuf 4:237–247
3. Pandey C, Thakare JG, Taraphdar PK et al (2021) Characterization of the soft zone in dissimilar welds joint of 2.25Cr-1Mo and lean duplex LDX2101 steel. Fusion Eng Des 163:112147. https://doi.org/10.1016/j.fusengdes.2020.112147
4. Lalvani H, Mandal P, Yaghi A et al (2022) A solid-state joining approach to manufacture of transition joints for high integrity applications. J Manuf Process 73:90–111
5. Maurya AK, Pandey C, Chhibber R (2021) Dissimilar welding of duplex stainless steel with Ni alloys: a review. Int J Pres Ves Pip 192:104439. https://doi.org/10.1016/j.ijpvp.2021.104439
6. Wu G, Meng QL (2019) Microstructural evolution of a steam-turbine rotor subjected to a water-quenching process: numerical simulation and experimental verification. Adv Manuf 7:84–104
7. Dak G, Pandey C (2020) A critical review on dissimilar welds joint between martensitic and austenitic steel for power plant application. J Manuf Process 58:377–406
8. Lee WS, Kao HC (2014) High temperature deformation behaviour of Haynes 188 alloy subjected to high strain rate loading. Mater Sci Eng A 594:292–301
9. Han J, Yoo B, Im HJ et al (2019) Microstructural evolution of the heat affected zone of a Co-Ti-W alloy upon laser cladding with a CoNiCrAlY coating. Mater Charact 158:109998
10. Moradi M, Ghorbani D, Moghadam MK et al (2019) Nd: YAG laser hardening of AISI 410 stainless steel: Microstructural evaluation, mechanical properties, and corrosion behavior. J Alloys Compd 795:213–222
11. Tsai MC, Chiou CS, Du JS et al (2002) Phase transformation in AISI 410 stainless steel. Mater Sci Eng A 332:1–10
12. Cottrell CLM (1985) Electron beam welding-a critical review. Mater Des 6:285–291
13. Kar J, Roy SK, Roy GG (2016) Effect of beam oscillation on electron beam welding of copper with AISI-304 stainless steel. J Mater Process Technol 233:174–185
14. Lacki P, Adamus K (2011) Numerical simulation of the electron beam welding process. Comput Struct 89:977–985
15. Qi YL, Ju D, Quan H et al (2000) Electron beam welding, laser beam welding and gas tungsten arc welding of titanium sheet. Mater Sci Eng A 280:177–181
16. Ding K, Zhao BG, Huo X et al (2020) Role of the V-notch location in the impact toughness of 9 pct Cr-CrMoV dissimilar welded joints. Metall Mater Trans A 51:1699–1706
17. Ramkumar KD, Oza S, Periwal S et al (2015) Characterization of weld strength and toughness in the multi-pass welding of Inconel 625 and Super-duplex stainless steel UNS S32750. Ciência & Tecnologia dos Materiais 27:41–52
18. Kumar S, Yadav VK, Sharma SK et al (2021) Role of dissimilar Ni-based ERNiCrMo-3 filler on the microstructure, mechanical properties and weld induced residual stresses of the ferritic/martensitic P91 steel welds joint. Int J Pres Ves Pip 193:104443. https://doi.org/10.1016/j.ijpvp.2021.104443
19. Dak G, Pandey C (2021) Experimental investigation on microstructure, mechanical properties, and residual stresses of dissimilar welded joint of martensitic P92 and AISI 304L austenitic stainless steel. Int J Pres Ves Pip 194:104536. https://doi.org/10.1016/j.ijpvp.2021.104536
20. Sauraw A, Sharma AK, Fydrych D et al (2021) Study on microstructural characterization, mechanical properties and residual stress of GTAW dissimilar joints of P91 and P22 steels. Materials 14:6591. https://doi.org/10.3390/ma14216591
21. Bhanu V, Fydrych D, Gupta A et al (2021) Study on microstructure and mechanical properties of laser welded dissimilar joint of P91 steel and Incoloy 800HT nickel alloy. Materials 14:5876
22. Omar AA (1998) Effects of welding parameters on hard zone formation at dissimilar metal welds. Weld J 77:86–93
23. Kou S, Yang YK (2007) Fusion-boundary macrosegregation in dissimilar-filler welds. Weld J 86:303–312
24. Soysal T, Kou S, Tat D et al (2016) Macrosegregation in dissimilar-metal fusion welding. Acta Mater 110:149–160
25. Wang HT, Wang GZ, Xuan FZ et al (2013) Local mechanical properties of a dissimilar metal welded joint in nuclear powersystems. Mater Sci Eng A 568:108–117
26. Tasalloti H, Kah P, Martikainen J (2017) Effect of heat input on dissimilar welds of ultra high strength steel and duplex stainless steel: Microstructural and compositional analysis. Mater Charact 123:29–41
27. Ding K, Ji HJ, Liu X et al (2018) Prevention of carbon migration in 9% Cr/CrMoV dissimilar welded joint by adding tungsten inert gas overlaying layer. J Iron Steel Res Int 25:847–853
28. Kumar S, Shahi AS (2016) Studies on metallurgical and impact toughness behavior of variably sensitized weld metal and heat affected zone of AISI 304L welds. Mater Des 89:399–412
29. Ding K, Wang P, Liu X et al (2018) Formation of lamellar carbides in Alloy 617-HAZ and their role in the impact toughness of Alloy 617/9%Cr dissimilar welded joint. J Mater Eng Perform 27:6027–6039
30. Liu W, Liu X, Lu FG et al (2015) Creep behavior and microstructure evaluation of welded joint in dissimilar modified 9Cr-1Mo steels. Mater Sci Eng A 644:337–346
31. Ding K, Qiao SF, Liu SP et al (2019) Failure transition mechanism of stress rupture performance of the Inconel 625/9 pct Cr steel dissimilar welded joint. Metall Mater Trans A 50:4652–4664
32. Chen Z, Lu Y, Ding X et al (2016) Microstructural and hardness investigations on a dissimilar metal weld between low alloy steel and Alloy 82 weld metal. Mater Charact 121:166–174
33. Chen ZR, Lu YH (2015) TEM observation of martensite layer at the weld interface of an A508III to Inconel 82 dissimilar metal weld joint. Metall Mater Trans A 46:5494–5498
34. Dupont J, Kusko C (2007) Martensite formation in austenitic/ferritic dissimilar alloy welds. Weld J 86:51–54
35. Zhang Y, Ding K, Wu G et al (2020) Aging-induced formation of the nano-sized clustered carbides in the weld metal of Co-based alloy/AISI 410 stainless steel dissimilar welded joint. Metall Res Technol 117:402. https://doi.org/10.1051/metal/2020033
36. Liu M, Zhang XW, Yang KX et al (2019) Comparison and sensitivity analysis of the efficiency enhancements of coal-fired power plants integrated with supercritical CO2 Brayton cycle and steam Rankine cycle. Energy Convers Manage 198:111918. https://doi.org/10.1016/j.enconman.2019.111918
37. Kadoi K, Murakami A, Shinozaki K et al (2016) Crack repair welding by CMT brazing using low melting point filler wire for long-term used steam turbine cases of Cr-Mo-V cast steels. Mater Sci Eng A 666:11–18
38. Chen XR, Zhai QJ, Dong H et al (2020) Molybdenum alloying in cast iron and steel. Adv Manuf 8:3–14
39. Bian J, Mohrbacher H, Zhang JS et al (2015) Application potential of high performance steels for weight reduction and efficiency increase in commercial vehicles. Adv Manuf 3:27–36
40. Sirohi S, Gupta A, Pandey C et al (2022) Investigation of the microstructure and mechanical properties of the laser welded joint of P22 and P91 steel. Opt Laser Technol 147:107610. https://doi.org/10.1016/j.optlastec.2021.107610
41. Anand R, Sudha C, Karthikeyan T et al (2009) Effectiveness of Ni-based diffusion barriers in preventing hard zone formation in ferritic steel joints. J Mater Sci 44:257–265
42. Anand R, Sudha C, Paul VT et al (2010) Microstructural changes in Grade 22 ferritic steel clad successively with Ni-based and 9Cr filler metals. Weld J 89:65–74
