The maximum flyer impact velocity based on a dynamic solidification cracking mechanism is proposed to describe the upper limit of collision welding process windows. Thus, the upper limit of the weld window is governed by the evolution of dynamic stresses and temperatures at the weld interface. Current formulations for the upper limit of the collision weld window assume that both the flyer and target are made of the same material and approximate stress propagation velocities using the acoustic velocity or the shear wave velocity of the weld material. However, collision welding fundamentally depends on the impacts that generate shockwaves in weld members, which can dominate the stress propagation velocities in thin weld sections. Therefore, this study proposes an alternative weld window upper limit that approximates stress propagation using shock velocities calculated from modified 1-D Rankine-Hugoniot relations. The shock upper limit is validated against the experimental and simulation data in the collision welding literature, and offers a design tool to rapidly predict more accurate optimal collision weld process limits for similar and dissimilar weld couples compared to existing models without the cost or complexity of high-fidelity simulations.
The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-023-00472-y
Blake Barnett
,
Anupam Vivek
,
Glenn Daehn
. Shock effects on the upper limit of the collision weld process window[J]. Advances in Manufacturing, 2024
, 12(2)
: 365
-378
.
DOI: 10.1007/s40436-023-00472-y
1. Blazynski TZ (1983) Explosive welding, forming, and compaction. Springer, Berlin
2. Carl LR (1944) Brass welds made using detonation impulses. Met Prog 46:102–103
3. Crossland B, Bahrani AS (1968) Fundamentals of explosive welding. Contemp Phys 9:71–87
4. Findik F (2011) Recent developments in explosive welding. Mater Des 32(3):1081–1093
5. Wittman RH, Carpenter SH (1975) Explosion welding. Annu Rev Mater Sci 5:177–199
6. Kore SD (2018) Magnetic pulse welding. Weld Fundam Process 6:704–710
7. Vivek A, Hansen SR, Liu BC et al (2013) Vaporizing foil actuator: tool for collision welding. J Mater Process Technol 213:2304–2311
8. Wang H, Taber G, Liu D et al (2015) Laser impact welding: apparatus design and parametric optimization. J Manufacturing Process 19:118–124
9. Kuz’minLysak VIVI, Kriventsov AN et al (2004) Critical conditions for formation and failure of welded joints during explosive welding. Weld Int 18:223–227
10. Raoelison RN, Sapanathan T, Padayodi E et al (2016) Interfacial kinematics and governing mechanisms under the influence of high strain rate impact conditions: numerical computations of experimental observations. J Mech Phys Solids 96:147–161
11. Vivek A, Liu BC, Hansen SR et al (2014) Accessing the collision welding process window for titanium/copper welds with vaporizing foil actuators and grooved targets. J Mater Process Technol 214:1583–1589
12. Zhang Y, Babu SS, Prothe C et al (2011) Application of high velocity impact welding at different length scales. J Mater Process Technol 211:944–952
13. Wittman RH (1973) Influence of collision parameters on the strength and microstructure of explosion-welded aluminum alloys. Proc 2nd Int Symp Use Explos Energy Manufacturer 153–168
14. Zakharenko ID (1971) Thermal state of the weld zone in explosive welding. Combust Explos Shock Waves 7:229–231
15. Zakharenko ID, Sobolenko TM (1971) Thermal effects in the weld zone in explosive welding. Combust Explos Shock Waves 7:373–375
16. Zakharenko ID (1972) Critical conditions in detonation welding. Combust Explos Shock Waves 8:341–345
17. Efremov VV, Zakharenko ID, Division S (1976) Determination of the upper limit to explosive welding. Fiz Goreniya y Vzryva 3:226–230
18. Émurlaeva YY, Bataev IA, Zhou Q et al (2019) Welding window: comparison of the Deribas and Wittman approaches and SPH simulation results. Metals (Base) 9(12):1323
19. Lippold JC (2014) Welding metallurgy and weldability. John Wiley & Sons, Hoboken
20. Fukuhisa M, Nakagawa H, Sorada K (1982) Dynamic observation of solidification and solidification cracking during welding with an optical microscope (I): solidification front and behavior of cracking (materials, metallurgy, and weldability). Trans JWRI 11(2):67–77
21. Cross C (2005) Origin of weld-solidification cracking. In Boellinghaus T, Herold H (eds) Hot-crack phenom welds, Springer, Berlin
22. Deribas AA, Zakharenko ID (1975) Determination of limiting collision conditions for the explosive welding of metals. Fiz Goreniya y Vzryva 11:133–135
23. Prasad KS, Mao Y, Vivek A et al (2020) Rapid throughput system for shock and impact characterization: design and examples in compaction, spallation, and impact welding. J Manuf Mater Process 4(4):116. https://doi.org/10.3390/jmmp4040116
24. Wang H, Wang Y (2019) High-velocity impact welding process: a review. Metals (Base) 9(2):144. https://doi.org/10.3390/met9020144
25. Mallory HD (1955) Propagation of shock waves in aluminum. J Appl Phys 26:555–559
26. Meyers MA, Murr LETATT (1981) Shock waves and high strain rate phenomena in metals: concepts and applications. Springer, Berlin
27. Carvalho GHSFL, Galvão I, Mendes R et al (2018) Explosive welding of aluminum to stainless steel. J Mater Process Technol 262:340–349
28. Carslaw HS, Jaeger JC (1959) Conduction of heat in solids. In: 2nd ed. Clarendon Press
29. Zakharenko ID (1990) Explosion welding of metals. Minsk: Science and Engineering
30. Kachan MS, Trishin YA (1975) Compression and rarefaction waves in solids. Combust Explos Shock Waves 11:816–819
31. Godunov SK, Deribas AA, Zabrodin AV et al (1970) Hydrodynamic effects in colliding solids. J Comput Phys 5:517–539
32. Walsh JM, Shreffler RG, Willig FJ (1953) Limiting conditions for jet formation during high-velocity collisions. J Appl Phys 24:349–359
33. Meyer MA (1994) Dynamic behavior of materials. John Wiley & Sons, Hoboken
34. Akbari-Mousavi SAA, Barrett LM et al (2008) Explosive welding of metal plates. J Mater Process Technol 202:224–239
35. Cui Y, Liu D, Zhang Y et al (2020) Microstructure and mechanical properties of a TA1-low alloy steel composite plate manufactured by explosive welding. Metals (Base) 10(5):663. https://doi.org/10.3390/met10050663
36. Thurston B, Mao Y, Lewis T et al (2021) Augmentation of plasma-based impulse generation with rapid chemical reactions BT - forming the future. In: Daehn G, Cao J, Kinsey B et al (eds) Forming the future, Springer, Cham
37. Ravichandran G (2003) On the conversion of plastic work into heat during high-strain-rate deformation. AIP Conf Proc 557:557–562
38. De Rosset WS (2006) Analysis of explosive bonding parameters. Mater Manuf Process 21:634–638
39. Klueh RL (2005) Properties and selection: iron, steel, and highperformance alloys. ASM International
40. Committee A (1990) Properties and selection: nonferrous alloys and special purpose materials. ASM International 92. https://doi.org/10.31399/asm.hb.v02.9781627081627
41. Marsh SP (1980) LASL shock Hugoniot data. University of California Press, Berkeley
42. Nassiri A, Zhang S, Lee T et al (2017) Numerical investigation of CP-Ti & Cu 110 impact welding using smoothed particle hydrodynamics and arbitrary Lagrangian-Eulerian methods. J Manuf Process 28:558–564
43. Gleason G, Sunny S, Sadeh S et al (2020) Eulerian modeling of plasma-pressure driven laser impact weld processes. Procedia Manuf 48:204–214
44. Vivek A, Gonzalez M, Barnett B et al (2023) Process effects on the heterogenous microctructure of an impact welded interface. In: Proc TMS 2023 Annu Meeting, San Diego
45. Nassiri A, Vivek A, Abke T et al (2017) Depiction of interfacial morphology in impact welded Ti/Cu bimetallic systems using smoothed particle hydrodynamics. Appl Phys Lett 110:231601. https://doi.org/10.1063/1.4984742
46. Zhang ZL, Liu MB (2019) Numerical studies on explosive welding with ANFO by using a density adaptive SPH method. J Manuf Process 41:208–220
47. PlotDigitizer, 3.1.5 (accessed Dec 4 2023). Available: https://plotdigitizer.com.
48. Akbari MSAA, Farhadi SP (2009) Experimental investigation of explosive welding of CP-titanium/AISI 304 stainless steel. Mater Des 30:459–468
49. Sarvari M, Abdollah-zadeh A, Naffakh-Moosavy H et al (2019) Investigation of collision surfaces and weld interface in magnetic pulse welding of dissimilar Al/Cu sheets. J Manuf Process 45:356–367
50. Bataev IA, Ogneva TS, Bataev AA et al (2015) Explosively welded multilayer Ni-Al composites. Mater Des 88:1082–1087
51. Zeng XY, Li XQ, Li XJ et al (2019) Numerical study on the effect of thermal conduction on explosive welding interface. Int J Adv Manuf Technol 104:2607–2617
52. Metals R (2010) Standard specification for titanium and titanium alloy strip, sheet, and plate 1. Annu B ASTM Stand 03:1–9
