Multiple-surface interferometry with nanoscale accuracy is important in the precise manufacturing of optically transparent parallel plates. To measure the surface profile and thickness variation of the plates simultaneously, the frequencies of the interferometric signal must be estimated from overlaid interferograms. Traditional algorithms typically suffer from issues such as spectrum leakage, reliance on initial iterative values, and the need for prior knowledge. In this study, the time-domain estimation algorithm for multiple-surface interferometry (MSI-TDe) is introduced based on a difference model to improve the accuracy of frequency estimation. The MSI-TDe algorithm is based on a normal equation that is insensitive to environmental noise. Using the algorithm, the frequencies of an interferometric signal can be estimated without prior knowledge and employed for wavefront reconstruction in multi-surface interferometry. Numerical simulation results indicate that the MSI-TDe algorithm has better frequency estimation performance than the discrete Fourier transform (DFT) algorithm. The relative error of the frequency estimation is on the order of 10–4. Three-surface interferometry was first performed. The root-mean square repeatability standard deviations of 0.07, 0.12 and 0.11 nm for the thickness variation, front surface profile, and rear surface profile, respectively, indicate the stability of the MSI-TDe algorithm. Four-surface interferometry with six frequency components was then performed. The adaptability of the MSI-TDe algorithm is validated by the measurement results.
The full text can be downloaded at https://doi.org/10.1007/s40436-024-00535-8
Yong-Hao Zhou
,
Bin Shen
,
Lin Chang
,
Sergiy Valyukh
,
Ying-Jie Yu
. Simultaneous precise measurements of multiple surfaces in wavelength-tuning interferometry via parameter estimation[J]. Advances in Manufacturing, 2025
, 13(4)
: 768
-783
.
DOI: 10.1007/s40436-024-00535-8
[1] Sun T, Zheng W, Yu Y et al (2019) Algorithm for surfaces profiles and thickness variation measurement of a transparent plate using a Fizeau interferometer with wavelength tuning. Appl Sci 9:2349. https://doi.org/10.3390/app9112349
[2] Seo YB, Joo KN, Ghim YS et al (2021) Subaperture stitching wavelength scanning interferometry for 3D surface measurement of complex-shaped optics. Meas Sci Technol 32:045201. https://doi.org/10.1088/1361-6501/abd056
[3] Hu Y, Chen Q, Liang Y et al (2019) Microscopic 3D measurement of shiny surfaces based on a multi-frequency phase-shifting scheme. Opt Lasers Eng 122:1-7
[4] Park J, Kim JA, Ahn H et al (2019) A review of thickness measurements of thick transparent layers using optical interferometry. Int J Precis Eng Manuf 20:463-477
[5] Guo H, Chen M (2005) Least-squares algorithm for phase-stepping interferometry with an unknown relative step. Appl Opt 44:4854-4859
[6] Chang L, He T, Wang C et al (2022) Multi-surface phase-shifting interferometry using harmonic frequency solution based on the total least squares. Opt Lasers Eng 150:106845. https://doi.org/10.1016/j.optlaseng.2021.106845
[7] Juarez-Salazar R, Robledo-Sánchez C, Meneses-Fabian C et al (2013) Generalized phase-shifting interferometry by parameter estimation with the least squares method. Opt Lasers Eng 51:626-632
[8] Kitagawa K (2014) Surface and thickness measurement of a transparent film using three-wavelength interferometry. In: Proceedings of the 14th international conference of the European society for precision engineering and nanotechnology, 1:4172-4175
[9] Wang Z, Han B (2004) Advanced iterative algorithm for phase extraction of randomly phase-shifted interferograms. Opt Lett 29:1671. https://doi.org/10.1364/ol.29.001671
[10] Xu X, Lu X, Tian J et al (2016) Random phase-shifting interferometry based on independent component analysis. Opt Commun 370:75-80
[11] Chen Y, Wang T, Kemao Q (2021) Parallel advanced iterative algorithm for phase extraction with unknown phase-shifts. Opt Lasers Eng 138:106408. https://doi.org/10.1016/j.optlaseng.2020.106408
[12] Chen Y, Kemao Q (2019) Advanced iterative algorithm for phase extraction: performance evaluation and enhancement. Opt Express 27:37634. https://doi.org/10.1364/oe.27.037634
[13] Hao Q, Zhu Q, Hu Y (2009) Random phase-shifting interferometry without accurately controlling or calibrating the phase shifts. Opt Lett 34:1288. https://doi.org/10.1364/ol.34.001288
[14] Vargas J, Carazo JM, Sorzano COS (2014) Error analysis of the principal component analysis demodulation algorithm. Appl Phys B Lasers Opt 115:355-364
[15] Zhang W, Lu X, Luo C et al (2015) Principal component analysis based simultaneous dual-wavelength phase-shifting interferometry. Opt Commun 341:276-283
[16] Deng J, Wang K, Wu D et al (2015) Advanced principal component analysis method for phase reconstruction. Opt Express 23:12222. https://doi.org/10.1364/oe.23.012222
[17] Xu JC, Jin WM, Chai LQ et al (2011) Phase extraction from randomly phase-shifted interferograms by combining principal component analysis and least squares method. Opt Express 19:20483. https://doi.org/10.1364/oe.19.020483
[18] Deng J, Wu D, Wang K et al (2016) Precise phase retrieval under harsh conditions by constructing new connected interferograms. Sci Rep 6:1-10
[19] Bai Y, He Y, Bao H et al (2015) Eigenvalue decomposition and least squares algorithm for depth resolution of wavenumber-scanning interferometry. J Opt Soc Am A 32:1352. https://doi.org/10.1364/josaa.32.001352
[20] Huang T, Bai Y, Tan J et al (2021) Estimating the number of layers for precise wavelength scanning interferometry. Meas Sci Technol 32:115203. https://doi.org/10.1088/1361-6501/ac0ad0
[21] Das S, Liu CH, Singh M et al (2018) Modified wavelength scanning interferometry for simultaneous tomography and topography of the cornea with Fourier domain optical coherence tomography. Biomed Opt Express 9:4443. https://doi.org/10.1364/boe.9.004443
[22] Kim Y, Hibino K, Sugita N et al (2015) Absolute optical thickness measurement of transparent plate using excess fraction method and wavelength-tuning Fizeau interferometer. Opt Express 23:4065. https://doi.org/10.1364/oe.23.004065
[23] Lifshitz E, Arieli U, Katz S et al (2019) High-resolution multi-scan compact Fourier transform-infrared spectrometer. Opt Lett 44:3126. https://doi.org/10.1364/ol.44.003126
[24] Padilla M, Servin M, Garnica G et al (2019) Design of robust phase-shifting algorithms using N-step formulas as building blocks. Opt Lasers Eng 121:346-351
[25] Chang L, Yu Y (2022) Wavelength-tuning phase-shifting interferometry of transparent plates using sub-signal frequency correction. Measurement 205:112157. https://doi.org/10.1016/j.measurement.2022.112157
[26] Bai Y, Zhou Y, He Z et al (2018) Wavenumber synthesis approach to high-resolution wavenumber scanning interference using a mode-hoped laser. Opt Express 26:5441. https://doi.org/10.1364/oe.26.005441
[27] Guo R, Liao Z, Li J et al (2019) Optical homogeneity measurement of parallel plates by wavelength-tuning interferometry using nonuniform fast Fourier transform. Opt Express 27:13072. https://doi.org/10.1364/oe.27.013072
[28] Samir I, Sabry YM, Fathy A et al (2019) Autoregressive superresolution microelectromechanical systems Fourier transform spectrometer. Appl Opt 58:6784. https://doi.org/10.1364/ao.58.006784
[29] Duan S, Zheng H (2023) Model parameter estimations of the multi-channel turbulence response from flutter flight tests based on autoregressive spectra. J Low Freq Noise Vib Act Control 42:173-191
[30] Xiao X, Zhou R, Ma X et al (2023) Harmonic phasor estimation method considering dense interharmonic interference. Entropy 25:236. https://doi.org/10.3390/e25020236
[31] Zhai M, Locquet A, Roquelet C et al (2020) Terahertz time-of-flight tomography beyond the axial resolution limit: autoregressive spectral estimation based on the modified covariance method. J Infrared Millim TE 41:926-939
[32] Tan J, He Z, Bai Y et al (2023) High depth resolution wavelength scanning interferometry with narrow scanning bandwidth via sinewaves separation. Opt Lasers Eng 164:107519. https://doi.org/10.1016/j.optlaseng.2023.107519
