Clothing skirt designed on conical truss model

doi:10.1007/s40436-013-0019-0

Advances in Manufacturing

• • 下一篇

Clothing skirt designed on conical truss model

Eri Nakayama • Sachiko Ishida • Yu-Jing Liao •Ichiro Hagiwara

Organization for the Strategic Coordination of Research and Intellectual Property, Meiji University

收稿日期:2012-12-25 修回日期:2013-03-04 出版日期:2013-06-25 发布日期:2013-03-29
通讯作者: e-mail: tz12007@meiji.ac.jp

Clothing skirt designed on conical truss model

Eri Nakayama • Sachiko Ishida • Yu-Jing Liao •Ichiro Hagiwara

Organization for the Strategic Coordination of Research and Intellectual Property, Meiji University

Received:2012-12-25 Revised:2013-03-04 Online:2013-06-25 Published:2013-03-29
Contact: e-mail: tz12007@meiji.ac.jp

摘要/Abstract

摘要： Several applications of Origami have been tested in industrial area. However, Origami based design is found only in lamp shade and wrapping in design area, and has not been practically applied especially in clothing. In this paper, the conical truss model is applied in the clothing skirt, and the simulation software from 2D to 3D is developed by parametric Origami module (POM). Finally,the pattern is copied on felt clothing, and the scaled model of skirt on the basis of conical reverse truss model design is made.

关键词: Origami , Conical , truss model , , Parametric , Origami module (POM)

Abstract: Several applications of Origami have been tested in industrial area. However, Origami based design is found only in lamp shade and wrapping in design area, and has not been practically applied especially in clothing. In this paper, the conical truss model is applied in the clothing skirt, and the simulation software from 2D to 3D is developed by parametric Origami module (POM). Finally,the pattern is copied on felt clothing, and the scaled model of skirt on the basis of conical reverse truss model design is made.

Key words: Origami , , Conical truss model , , Parametric , , Origami module (POM)

Eri Nakayama, Sachiko Ishida, Yu-Jing Liao, Ichiro Hagiwara. Clothing skirt designed on conical truss model[J]. Advances in Manufacturing, doi: 10.1007/s40436-013-0019-0.

[1]	A. P. Tiwary,B. B. Pradhan,B. Bhattacharyya. Application of multi-criteria decision making methods for selection of micro-EDM process parameters[J]. Advances in Manufacturing, 2014, 2(3): 251-258.
[2]	Xin-Hua Yi,Xiao-Min Cheng,Feng-Lian Niu,Hong-Chao Fan. CFD simulation of micro-particle trapping under water tweezers[J]. Advances in Manufacturing, 2014, 2(3): 259-264.
[3]	Min Jiang,Li-Na Chen,Jin He,Guang-Yao Chen,Chong-He Li,Xiong-Gang Lu. Effect of controlled rolling/controlled cooling parameters on microstructure and mechanical properties of the novel pipeline steel[J]. Advances in Manufacturing, 2014, 2(3): 265-274.
[4]	Marius Spo¨ttl,Hardy Mohrbacher. Laser-based manufacturing concepts for efficient production of tailor welded sheet metals[J]. Advances in Manufacturing, 2014, 2(3): 193-202.
[5]	Lapo Chirici,Ke-Sheng Wang. Tackling the storage problem through genetic algorithms[J]. Advances in Manufacturing, 2014, 2(3): 203-211.
[6]	Pierre Coddet,Han-lin Liao,Christian Coddet. A review on high power SOFC electrolyte layer manufacturing using thermal spray and physical vapour deposition technologies[J]. Advances in Manufacturing, 2014, 2(3): 212-221.
[7]	V. B. Saputra,S. K. Ong,A. Y. C. Nee. Optimum calibration of a parallel kinematic manipulator using digital indicators[J]. Advances in Manufacturing, 2014, 2(3): 222-230.
[8]	Yong-Ze Yu,Lu-Lu Zheng,Hai-Ping Chen,Wei-Hua Chen,Qing-Xi Hu. Fabrication of hierarchical polycaprolactone/gel scaffolds via combined 3D bioprinting and electrospinning for tissue engineering[J]. Advances in Manufacturing, 2014, 2(3): 231-238.
[9]	Pushparajah Rajaguru,Hua Lu,Chris Bailey. Application of nonlinear fatigue damage models in power electronic module wirebond structure under various amplitude loadings[J]. Advances in Manufacturing, 2014, 2(3): 239-250.
[10]	Rishad Rayyaan ? Yi Wang ? Richard Kennon. Ontology-based interoperability solutions for textile supply chain[J]. Advances in Manufacturing, 2014, 2(2): 97-105.
[11]	Ke-Sheng Wang. Intelligent and integrated RFID (II-RFID) system for improving traceability in manufacturing[J]. Advances in Manufacturing, 2014, 2(2): 106-120.
[12]	Alemu Moges Belay ? Torgeir Welo ?Petri Helo. Approaching lean product development using system dynamics:investigating front-load effects[J]. Advances in Manufacturing, 2014, 2(2): 130-140.
[13]	B?rge Sj?bakk ? Maria Kollberg Thomassen ?Erlend Alfnes. Implications of automation in engineer-to-order production:a case study[J]. Advances in Manufacturing, 2014, 2(2): 141-149.
[14]	Xue-Hua Sun ? Xue-Jian Chu ? Zhong-Dai Wu. Incentive regulation of banks on third party logistics enterprises in principal-agent-based inventory financing[J]. Advances in Manufacturing, 2014, 2(2): 150-157.
[15]	Emrah Arica ? Daryl J. Powell. A framework for ICT-enabled real-time production planning and control[J]. Advances in Manufacturing, 2014, 2(2): 158-164.

Clothing skirt designed on conical truss model

Clothing skirt designed on conical truss model

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价