Novel design and composition optimization of self-lubricating functionally graded cemented tungsten carbide cutting tool material for dry machining

doi:10.1007/s40436-020-00312-3

Advances in Manufacturing ›› 2021, Vol. 9 ›› Issue (1): 34-46.doi: 10.1007/s40436-020-00312-3

• ARTICLES • 上一篇

Novel design and composition optimization of self-lubricating functionally graded cemented tungsten carbide cutting tool material for dry machining

Rityuj Singh Parihar, Raj Kumar Sahu, Srinivasu Gangi Setti

Department of Mechanical Engineering, National Institute of Technology Raipur, Raipur, India

收稿日期:2019-08-10 修回日期:2020-05-01 发布日期:2021-02-27
通讯作者: Srinivasu Gangi Setti E-mail:nivassetti@gmail.com
基金资助:
This work was supported by the Chhattisgarh Council of Science and Technology (CCOST) (Grant No. 2230/CCOST/MRP/15, dated 23.12.2015).

Novel design and composition optimization of self-lubricating functionally graded cemented tungsten carbide cutting tool material for dry machining

Rityuj Singh Parihar, Raj Kumar Sahu, Srinivasu Gangi Setti

Department of Mechanical Engineering, National Institute of Technology Raipur, Raipur, India

Received:2019-08-10 Revised:2020-05-01 Published:2021-02-27
Contact: Srinivasu Gangi Setti E-mail:nivassetti@gmail.com
Supported by:
This work was supported by the Chhattisgarh Council of Science and Technology (CCOST) (Grant No. 2230/CCOST/MRP/15, dated 23.12.2015).

摘要/Abstract

摘要： The functionally graded cemented tungsten carbide (FGCC) is a suitable material choice for cutting tool applications due to balanced hardness and fracture toughness. The presence of cobalt and CaF₂ composition gradient in FGCC may enhance mechanical as well as antifriction properties. Therefore, structural design of selflubricating FGCC was proposed using Power law composition gradient model and thermal residual stresses (TRSs) as a key parameter. Wherein, S. Suresh and A. Mortensen model was adopted for estimation of TRS, and optimum composition gradient was identified at Power law exponent n=2. The designed material displayed compressive and tensile TRS at surface and core respectively; subsequently fabricated by spark plasma sintering and characterized via scanning electron microscope (SEM), indentation method. The agreement between experimental and analytical values of TRS demonstrated the effectiveness of intended design model in the composition optimization of self-lubricating FGCC. This work will be helpful in implementation of dry machining for clean and green manufacturing.

The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-020-00312-3

关键词: Functionally graded cemented tungsten carbide (FGCC), Thermal residual stress (TRS), Solid lubricant, Power law

Abstract: The functionally graded cemented tungsten carbide (FGCC) is a suitable material choice for cutting tool applications due to balanced hardness and fracture toughness. The presence of cobalt and CaF₂ composition gradient in FGCC may enhance mechanical as well as antifriction properties. Therefore, structural design of selflubricating FGCC was proposed using Power law composition gradient model and thermal residual stresses (TRSs) as a key parameter. Wherein, S. Suresh and A. Mortensen model was adopted for estimation of TRS, and optimum composition gradient was identified at Power law exponent n=2. The designed material displayed compressive and tensile TRS at surface and core respectively; subsequently fabricated by spark plasma sintering and characterized via scanning electron microscope (SEM), indentation method. The agreement between experimental and analytical values of TRS demonstrated the effectiveness of intended design model in the composition optimization of self-lubricating FGCC. This work will be helpful in implementation of dry machining for clean and green manufacturing.

The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-020-00312-3

Key words: Functionally graded cemented tungsten carbide (FGCC), Thermal residual stress (TRS), Solid lubricant, Power law

Rityuj Singh Parihar, Raj Kumar Sahu, Srinivasu Gangi Setti. Novel design and composition optimization of self-lubricating functionally graded cemented tungsten carbide cutting tool material for dry machining[J]. Advances in Manufacturing, 2021, 9(1): 34-46.

参考文献

1. Zhang FL, Wang CY, Zhu M (2003) Nanostructured WC/Co composite powder prepared by high energy ball milling. Scr Mater 49:1123-1128
2. Xu CH, Wu GY, Xiao GC et al (2014) Al₂O₃/(W, Ti) C/CaF₂ multi-component graded self-lubricating ceramic cutting tool material. Int J Refract Met Hard Mater 45:125-129
3. Liu H, Xue Q (1996) The tribological properties of TZP-graphite self-lubricating ceramics. Wear 198:143-149
4. Klocke F, Eisenblatter G (1997) Dry cutting. Ann ClRP 46(2):519-526
5. Jianxin D, Tongkun C, Lili L (2005) Self-lubricating behaviors of Al₂O₃/TiB₂ ceramic tools in dry high-speed machining of hardened steel. J Eur Ceram Soc 25:1073-1079
6. Sreejith PS, Ngoi BKA (2000) Dry machining:machining of the future. J Mater Process Technol 101:287-291
7. Feng Y, Zhang J, Wang L et al (2017) Fabrication techniques and cutting performance of micro-textured self lubricating ceramic cutting tools by in-situ forming of Al₂O₃-TiC. Int J Refract Met Hard Mater 68:121-129
8. Wu G, Xua C, Xiao G et al (2018) Structure design of Al₂O₃/TiC/CaF₂ multicomponent gradient selflubricating ceramic composite and its tribological behaviors. Ceram Int 44:5550-5563
9. Gong F, Zhao J, Li Z et al (2018) Design, fabrication and mechanical properties of multidimensional graded ceramic tool materials. Ceram Int 44:2941-2951
10. Muthuraja A, Senthilvelan S (2015) Adhesive wear performance of tungsten carbide based solid lubricant material. Int J Refract Met Hard Mater 52:235-244
11. Muthuraja A, Senthilvelan S (2015) Abrasive wear performance of tungsten carbide based self-lubricant cutting tool material. Int J Refract Met Hard Mater 51:91-101
12. Singh T, Gangil B, Patnaik A et al (2019) Physico-mechanical, thermal and dynamic mechanical behaviour of natural-synthetic fiber reinforced vinylester based homogenous and functionally graded composites. Mater Res Express 6:025704
13. Abedi T, Khameneh Asl S (2019) Synthesis of a novel functionally graded coatings of Ni-Cr/Al₂O₃ nanocomposite coating by pulse electrodeposition. Mater Res Express 6:056403
14. Xu C, Xiao G, Zhang Y et al (2014) Finite element design and fabrication of Al₂O₃/TiC/CaF₂ gradient self-lubricating ceramic tool material. Ceram Int 40:10971-10983
15. Xing A, Jun Z, Huang CZ et al (1998) Development of an advanced ceramic tool material-functionally gradient cutting ceramics. Mater Sci Eng A 248:125-131
16. Muthuraja A, Senthilvelan S (2015) Development of tungsten carbide based self lubricant cutting tool material:preliminary investigation. Int J Refract Met Hard Mater 48:89-96
17. Deng JX, Liu LL, Yang XF et al (2007) Self-lubrication of Al₂O₃/TiC/CaF₂ ceramic composites in sliding wear tests and in machining processes. Mater Des 28:757-764
18. Parihar RS, Setti SG, Sahu RK (2018) Preliminary investigation on development of functionally graded cemented tungsten carbide with solid lubricant via ball milling and spark plasma sintering. J Compos Mater 52(10):1363-1377
19. Parihar RS, Setti SG, Sahu RK (2018) Recent advances in the manufacturing processes of functionally graded materials:a review. Sci Eng Compos Mater 25(2):309-336
20. Kumar B, Mer KKS, Prasad L (2019) Dry sliding wear behaviour of aluminium metal matrix-based functionally graded materials reinforced with alumina particles. Trends Mater Eng. https://doi.org/10.1007/978-981-13-9016-6_1
21. Chen Z, Ji L, Guo N, Guo R (2018) Mechanical properties and microstructure of Al₂O₃/TiC based self lubricating ceramic tool with CaF₂@Al (HO)₃. Int J Refract Met Hard Mater 75:50-55
22. Zhao J, Ai X, Deng J et al (2004) Thermal shock behaviors of functionally graded ceramic tool materials. J Eur Ceram Soc 24:847-854
23. Suresh S, Mortensen A (1997) Functionally graded metals and metal-ceramic composites:part 2 thermomechanical behaviour. Int Mater Rev 42(3):85-116
24. Safari-Kahnaki A, Hosseini SM, Tahani M (2011) Thermal shock analysis and thermo-elastic stress waves in functionally graded thick hollow cylinders using analytical method. Int J Mech Mater Des 7:167-184
25. Parihar RS, Setti SG, Sahu RK (2019) Effect of sintering parameters on microstructure and mechanical properties of selflubricating functionally graded cemented tungsten carbide. J Manuf Processes 45:498-508
26. Emanuelli L, Molinari A, Arrighetti G et al (2018) Effect of the sintering parameters on the liquid Co migration in WC-Co. Int J Refract Met Hard Mater 70:202-209
27. Ther O, Colin C, Dourfaye A (2017) Functionally graded cemented carbides elaboration by imbibition process-better understanding of liquid migration and homogenization mechanisms for an improved process. Front Mater Process Appl Res Technol. https://doi.org/10.1007/978-981-10-4819-7_10
28. Larsson C, Oden M (2004) X-ray diffraction determination of residual stresses in functionally graded WC-Co composites. Int J Refract Met Hard Mater 22:177-184

Novel design and composition optimization of self-lubricating functionally graded cemented tungsten carbide cutting tool material for dry machining

Novel design and composition optimization of self-lubricating functionally graded cemented tungsten carbide cutting tool material for dry machining

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价