Optimization of fused deposition modeling process parameters: a review of current research and future prospects

doi:10.1007/s40436-014-0097-7

Abstract

Abstract: Fused deposition modeling (FDM) is one of the most popular additive manufacturing technologies for various engineering applications. FDM process has been introduced commercially in early 1990s by Stratasys Inc., USA. The quality of FDM processed parts mainly depends on careful selection of process variables. Thus, identification of the FDM process parameters that significantly affect the quality of FDM processed parts is important. In recent years, researchers have explored a number of ways to improve the mechanical properties and part quality using various experimental design techniques and concepts. This article aims to review the research carried out so far in determining and optimizing the process parameters of the FDM process. Several statistical designs of experiments and optimization techniques used for the determination of optimum process parameters have been examined. The trends for future FDM research in this area are described.

Key words: Fused deposition modeling (FDM), Experimental design, Additive manufacturing, Process parameters, Mechanical properties, Part quality

Omar A. Mohamed, Syed H. Masood, Jahar L. Bhowmik. Optimization of fused deposition modeling process parameters: a review of current research and future prospects[J]. Advances in Manufacturing, 2015, 3(1): 42-53.

TrendMD

References

1. Gebhardt A (2003) Rapid prototyping. Hanser, Munich

2. Gibson I, Rosen DW, Stucker B (2010) Additive manufacturing technologies. Springer, Heidelberg

3. Kai CC, Fai LK, Chu-Sing L (2003) Rapid prototyping: principles and applications in manufacturing. World Scientific Publishing Co. Pte. Ltd., Singapore

4. Upcraft S, Fletcher R (2003) The rapid prototyping technologies. Assem Autom 23(4):318-330

5. Mansour S, Hague R (2003) Impact of rapid manufacturing on design for manufacture for injection moulding. Proc Inst Mech Eng Part B 217(4):453-461

6. Hopkinson N, Hague R, Dickens P (eds) (2006) Rapid manufacturing: an industrial revolution for the digital age.Wiley, NewJersey

7. Bernard A, Fischer A (2002) New trends in rapid product development. CIRP Ann Manuf Technol 51(2):635-652

8. Gebhardt A (2012) Understanding additive manufacturing. Carl Hanser Verlag GmbH & Co. KG, Munich

9. Kai CC, Fai LK, Chu-Sing L (2010) Rapid prototyping: principles and applications. World Scientific Publishing Co. Pte. Ltd., Singapore

10. Noorani R (2006) Rapid prototyping: principles and applications. Wiley, New Jersey

11. Montero M, Roundy S, Odell D et al (2001) Material characterization of fused deposition modeling ABS by designed experiments. In: Proceedings of Rapid Prototyping and Manufacturing Conference. Cincinnati, OH, USA

12. Masood SH (1996) Intelligent rapid prototyping with fused deposition modelling. Rapid Prototyp J 2(1):24-33

13. Groza JR, Shackelford JF (2010) Materials processing handbook. CRC Press, Boca Raton

14. Anitha R, Arunachalam S, Radhakrishnan P (2001) Critical parameters influencing the quality of prototypes in fused deposition modelling. J Mater Process Technol 118(1-3):385-388

15. Nancharaiah T, Raju DR, Raju VR (2010) An experimental investigation on surface quality and dimensional accuracy of FDM components. Int J Emerg Technol 1(2):106-111

16. Thrimurthulu K, Pandey PM, Reddy NV (2004) Optimum part deposition orientation in fused deposition modeling. Int J Mach Tools Manuf 44(6):585-594

17. Horvath D, Noorani R, Mendelson M (2007) Improvement of surface roughness on ABS 400 polymer using design of experiments (DOE). Mater Sci Forum 561:2389-2392

18. Wang CC, Lin TW, Hu SS (2007) Optimizing the rapid prototyping process by integrating the Taguchi method with the gray relational analysis. Rapid Prototyp J 13(5):304-315

19. Sood AK, Ohdar R, Mahapatra S (2009) Improving dimensional accuracy of fused deposition modelling processed part using grey Taguchi method. Mater Des 30(10):4243-4252

20. Zhang JW, Peng AH (2012) Process-parameter optimization for fused deposition modeling based on Taguchi method. Adv Mater Res 538:444-447

21. Sahu RK, Mahapatra S, Sood AK (2013) A study on dimensional accuracy of fused deposition modeling (FDM) processed parts using fuzzy logic. J Manuf Sci Prod 13(3):183-197

22. Lee B, Abdullah J, Khan Z (2005) Optimization of rapid prototyping parameters for production of flexible ABS object. J Mater Process Technol 169(1):54-61

23. Laeng J, Khan ZA, Khu SY (2006) Optimizing flexible behaviour of bow prototype using Taguchi approach. J Appl Sci 6:622-630

24. Zhang Y, Chou K (2008) A parametric study of part distortions in fused deposition modelling using three-dimensional finite element analysis. Proc Inst Mech Eng Part B 222(8):959-968

25. Nancharaiah T (2011) Optimization of process parameters in FDM process using design of experiments. Int J Emerg Technol 2(1):100-102

26. Kumar GP, Regalla SP (2012) Optimization of support material and build time in fused deposition modeling (FDM). Appl Mech Mater 110:2245-2251

27. Ahn SH, Montero M, Odell D et al (2002) Anisotropic material properties of fused deposition modeling ABS. Rapid Prototyp J 8(4):248-257

28. Ang KC, Leong KF, Chua CK et al (2006) Investigation of the mechanical properties and porosity relationships in fused deposition modelling-fabricated porous structures. Rapid Prototyp J 12(2):100-105

29. Sood AK, Ohdar RK, Mahapatra SS (2010) Parametric appraisal of mechanical property of fused deposition modelling processed parts. Mater Des 31(1):287-295

30. Percoco G, Lavecchia F, Galantucci LM (2012) Compressive properties of FDM rapid prototypes treated with a low cost chemical finishing. Res J Appl Sci Eng Technol 4(19):3838-3842

31. Rayegani F, Onwubolu GC (2014) Fused deposition modelling (FDM) process parameter prediction and optimization using group method for data handling (GMDH) and differential evolution (DE). Int J Adv Manuf Technol 73(1-4):509-519

32. Masood SH, Mau K, Song WQ (2010) Tensile properties of processed FDM polycarbonate material. Mater Sci Forum 654:2556-2559

33. Arivazhagan A, Masood SH, Sbarski I (2011) Dynamic mechanical analysis of FDM rapid prototyping processed polycarbonate material. In: Proceedings of the 69th annual technical conference of the society of plastics engineers 2011 (ANTEC 2011), vol 1. Boston, Massachusetts, United States, 1-5 May 2011, pp 950-955

34. Arivazhagan A, Masood SH (2012) Dynamic mechanical properties of ABS material processed by fused deposition modelling. Int J Eng Res Appl 2(3):2009-2014

35. Jami H, Masood SH, Song WQ (2013) Dynamic response of FDM made ABS parts in different part orientations. Adv Mater Res 748:291-294

36. Peace GS (1993) Taguchi methods, a hands-on approach. Addison- Wesley Publishing Company, Reading, MA

37. Roy RK (2010) A primer on the Taguchi method. Society of Manufacturing Engineers, Dearborn

38. Montgomery DC (2008) Design and analysis of experiments. Wiley, New Jersey

39. Wu CJ, Hamada MS (2001) Experiments: planning, analysis, and parameter design optimization. Wiley, New Jersey

40. Medsker L, Jain LC (1999) Recurrent neural networks: design and applications. CRC Press, Boca Raton

41. Haykin S (1999) Neural networks: a comprehensive foundation. Prentice-Hall Inc., New Jersey

42. Correia DS, Gonçalves CV (2005) Comparison between genetic algorithms and response surface methodology in GMAW welding optimization. J Mater Process Technol 160(1):70-76

[1]	Mohd Nazri Ahmad, Mohammad Khalid Wahid, Nurul Ain Maidin, Mohd Hidayat Ab Rahman, Mohd Hairizal Osman, Izzati Fatin Alis@Elias. Mechanical characteristics of oil palm fiber reinforced thermoplastics as filament for fused deposition modeling (FDM) [J]. Advances in Manufacturing, 2020, 8(1): 72-81.
[2]	Behrouz Bagheri, Mahmoud Abbasi. Development of AZ91/SiC surface composite by FSP: effect of vibration and process parameters on microstructure and mechanical characteristics [J]. Advances in Manufacturing, 2020, 8(1): 82-96.
[3]	Wei-Jun Zhu, Guo-Qiang Tian, Yang Lu, Kai Miao, Di-Chen Li. Leaching improvement of ceramic cores for hollow turbine blades based on additive manufacturing [J]. Advances in Manufacturing, 2019, 7(4): 353-363.
[4]	Saroj Kumar Padhi, S. S. Mahapatra, Rosalin Padhi, Harish Chandra Das. Performance analysis of a thick copper-electroplated FDM ABS plastic rapid tool EDM electrode [J]. Advances in Manufacturing, 2018, 6(4): 442-456.
[5]	Yu Dong, Jamie Milentis, Alokesh Pramanik. Additive manufacturing of mechanical testing samples based on virgin poly (lactic acid) (PLA) and PLA/wood fibre composites [J]. Advances in Manufacturing, 2018, 6(1): 71-82.
[6]	Jyotirmoy Nandy, Hrushikesh Sarangi, Seshadev Sahoo. Microstructure evolution of Al-Si-10Mg in direct metal laser sintering using phase-field modeling [J]. Advances in Manufacturing, 2018, 6(1): 107-117.
[7]	Saroj Kumar Padhi, Ranjeet Kumar Sahu, S. S. Mahapatra, Harish Chandra Das, Anoop Kumar Sood, Brundaban Patro, A. K. Mondal. Optimization of fused deposition modeling process parameters using a fuzzy inference system coupled with Taguchi philosophy [J]. Advances in Manufacturing, 2017, 5(3): 231-242.
[8]	Prakash KumarSahu, Kanchan Kumari, Sukhomay Pal, Surjya K. Pal. Hybrid fuzzy-grey-Taguchi based multi weld quality optimization of Al/Cu dissimilar friction stir welded joints [J]. Advances in Manufacturing, 2016, 4(3): 237-247.
[9]	A. Mohammadhosseini, S. H. Masood, D. Fraser, M. Jahedi. Dynamic compressive behaviour of Ti-6Al-4V alloy processed by electron beam melting under high strain rate loading [J]. Advances in Manufacturing, 2015, 3(3): 232-243.
[10]	Min Jiang,Li-Na Chen,Jin He,Guang-Yao Chen,Chong-He Li,Xiong-Gang Lu. Effect of controlled rolling/controlled cooling parameters on microstructure and mechanical properties of the novel pipeline steel [J]. Advances in Manufacturing, 2014, 2(3): 265-274.