Understanding the formation mechanism of subsurface damage in potassium dihydrogen phosphate crystals during ultraprecision fly cutting

doi:10.1007/s40436-019-00265-2

Advances in Manufacturing ›› 2019, Vol. 7 ›› Issue (3): 270-277.doi: 10.1007/s40436-019-00265-2

Previous Articles Next Articles

Understanding the formation mechanism of subsurface damage in potassium dihydrogen phosphate crystals during ultraprecision fly cutting

Yong Zhang¹, Ning Hou^1,2, Liang-Chi Zhang³

1 School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, People's Republic of China;
2 School of Mechatronics Engineering, Shenyang Aerospace University, Shenyang 110136, People's Republic of China;
3 Laboratory for Precision and Nano Processing Technologies, School of Mechanical and Manufacturing Engineering, The University of New South Wales, Sydney, NSW 2052, Australia

Received:2019-01-25 Revised:2019-06-26 Online:2019-09-25 Published:2019-10-09
Contact: Ning Hou, Liang-Chi Zhang E-mail:13b908074@hit.edu.cn;liangchi.zhang@unsw.edu.au
Supported by:
This work was supported by the National Natural Science Foundation of China (Grant No. 51875137), the Natural Science Foundation of Heilongjiang Province (Grant No. E2018033), and Australian Research Council (Grant No. DP170100567).

Abstract

Abstract: Potassium dihydrogen phosphate (KDP) crystals play an important role in high-energy laser systems, but the laser damage threshold (LDT) of KDP components is lower than expected. The LDT is significantly influenced by subsurface damage produced in KDP crystals. However, it is very challenging to detect the subsurface damage caused by processing because a KDP is soft, brittle, and sensitive to the external environment (e.g., humidity, temperature and applied stress). Conventional characterization methods such as transmission electron microscopy are ineffective for this purpose. This paper proposes a nondestructive detection method called grazing incidence X-ray diffraction (GIXD) to investigate the formation of subsurface damage during ultra-precision fly cutting of KDP crystals. Some crystal planes, namely (200), (112), (312), (211), (220), (202), (301), (213), (310) and (303), were detected in the processed subsurface with the aid of GIXD, which provided very different results for KDP crystal bulk. These results mean that single KDP crystals change into a lattice misalignment structure (LMS) due to mechanical stress in the subsurface. These crystal planes match the slip systems of the KDP crystals, implying that dislocations nucleate and propagate along slip systems to result in the formation of the LMS under shear and compression stresses. The discovery of the LMS in the subsurface provides a new insight into the nature of the laser-induced damage of KDP crystals.

The full text can be downloaded at https://link.springer.com/content/pdf/10.1007%2Fs40436-019-00265-2.pdf

Key words: Potassium dihydrogen phosphate (KDP) crystals, Subsurface damage, Lattice misalignment structure, Slip systems

Yong Zhang, Ning Hou, Liang-Chi Zhang. Understanding the formation mechanism of subsurface damage in potassium dihydrogen phosphate crystals during ultraprecision fly cutting[J]. Advances in Manufacturing, 2019, 7(3): 270-277.

TrendMD

References

1. De Yoreo JJ, Burnham AK, Whitman PK (2002) Developing KH₂PO₄ and KD₂PO₄ crystals for the world's most power laser. Int Mater Rev 47(3):113-152
2. Eimerl D (1987) Electro-optic, linear, and nonlinear optical properties of KDP and its isomorphs. Ferroelectrics 72(1):95-139
3. Zaitseva NP, De Yoreo JJ, DeHaven MR et al (1997) Rapid growth of large-scale (40-55 cm) KH₂PO₄ crystals. J Cryst Growth 180(2):255-262
4. Chen G, Sun Y, An C et al (2018) Measurement and analysis for frequency domain error of ultra-precision spindle in a flycutting machine tool. J Eng Manuf 232(9):1501-1507
5. Chen G, Sun Y, Zhang F et al (2017) Influence of ultra-precision flycutting spindle error on surface frequency domain error formation. Int J Adv Manuf Technol 88(9-12):3233-3241
6. Salo VI, Atroschenko LV, Garnov SV et al (1996) Structure, impurity composition, and laser damage threshold of the subsurface layers in KDP and KD*P single crystals. In:27th Annual boulder damage symposium:laser-induced damage in optical materials, pp 197-201
7. Tie G, Dai Y, Guan C et al (2013) Research on subsurface defects of potassium dihydrogen phosphate crystals fabricated by single point diamond turning technique. Opt Eng 52(3):033401
8. Wang QG, Gao H, Pei ZJ et al (2010) Study on the subsurface damage of KDP crystal ground with ultrasonic vibration assistance. J Synth Cryst 39(1):67-71
9. Wu DJ, Cao XS, Wang QG et al (2007) Damage detection and analysis of machined KDP crystal subsurface. Opt Precis Eng 15(11):1721-1726
10. Hou N, Zhang Y, Zhang LC et al (2016) Assessing microstructure changes in potassium dihydrogen phosphate crystals induced by mechanical stresses. Scripta Mater 113:48-50
11. Fu YJ, Gao ZS, Sun X et al (2000) Effects of anions on rapid growth and growth habit of KDP crystals. Prog Cryst Growth Charact Mater 40(1-4):211-220
12. Cai W, Katrusiak A (2013) Structure of the high-pressure phase IV of KH₂PO₄ (KDP). Dalton Trans 42(4):863-866
13. Zhang Q, Chen F, Kioussis N et al (2001) Ab initio study of the electronic and structural properties of the ferroelectric transition in KH₂PO₄. Phys Rev B 65(2):024108
14. Peng J, Zhang LC, Lu XC (2014) Elastic-plastic deformation of KDP crystals under nanoindentation. Mater Sci Forum 773-774:705-711
15. Gloaguen D, Fajoui J, Girault B (2014) Residual stress fields analysis in rolled Zircaloy-4 plates:grazing incidence diffraction and elastoplastic self-consistent model. Acta Mater 71:136-144
16. Angerer P, Strobl S (2014) Equi-penetration grazing incidence X-ray diffraction method:stress depth profiling of ground silicon nitride. Acta Mater 77:370-378
17. Kobayashi Y, Endo S, Ming LC et al (2002) Phase transitions and amorphization in KD₂PO₄ and KH₂PO₄ under high pressure. Phys Rev B 65(13):132105
18. Wang B, Wang SL, Fang CS et al (2005) Effects of Fe³⁺ ion on the growth habit of KDP crystal. J Synth Cryst 34(2):205-208
19. Sun X, Zhang YZ, Xu MX et al (2007) Effect of Fe³⁺ ion on the optical properties of KDP crystal. J Synth Cryst 36(6):1240-1244
20. Fang FZ, Venkatesh VC (1998) Diamond cutting of silicon with nanometric finish. CIRP Ann-Manuf Technol 47(1):45-49
21. Guin CH, Katrich MD, Savinkov AI et al (1980) Plastic strain and dislocation structure of the KDP group crystals. Cryst Res Technol 15(4):479-488
22. Zhang Y, Zhang LC, Liu M et al (2016) Revealing the mechanical properties of KDP crystals by nanoindentation. J Mater Res 31(8):1056-1064
23. Koslowski M, Cuitino AM, Ortiz M (2002) A phase-field theory of dislocation dynamics, strain hardening and hysteresis in ductile single crystals. J Mech Phys Solids 50(12):2597-2635
24. Endert H, Melle W (1981) Influence of dislocations in KDP crystals on laser damage threshold. Cryst Res Technol 16(7):815-819
25. Negres RA, Kucheyev SO, DeMange P et al (2005) Decomposition of KH₂PO₄ crystals during laser-induced breakdown. Appl Phys Lett 86(17):171107
26. Zhu SJ, Wang SL, Liu LL et al (2014) Refractive index homogeneity of large scale potassium dihydrogen phosphate crystal. Acta Phys Sin 63(10):107701
27. Schaffer CB, Brodeur A, Mazur E (2001) Laser-induced breakdown and damage in bulk transparent materials induced by tightly focused femtosecond laser pulses. Meas Sci Technol 12(11):1784-1794
28. Fleck JJ, Layne C (1973) Study of self-focusing damage in a high-power Nd:glass-rod amplifier. Appl Phys Lett 22(9):467-469

Understanding the formation mechanism of subsurface damage in potassium dihydrogen phosphate crystals during ultraprecision fly cutting

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 1

Recommended Articles

Metrics

Comments