Residual stress model of pre-stressed dry grinding considering coupling of thermal, stress, and phase transformation

doi:10.1007/s40436-019-00280-3

Abstract

Abstract: Pre-stressed dry grinding can result in a hardened layer on the part surface while the surface residual stress is controlled. Considering the factors of the thermal field, pre-stress, and microstructural transformation, a proximate model of surface residual stress for pre-stressed dry grinding is established using the ANSYS finite element simulation method and verified through experiment. The variation laws and mechanisms of the residual stress along with the grinding parameters are revealed. Under the comprehensive effect of pre-stress and phase transformation, the residual stress of pre-stressed dry grinding is revealed mainly as compressive stress. This increases as the pre-stress and grinding depth increase. Under the coupling effect, pre-stress has larger influence on the residual stress than the grinding depth. The model can analyze and predict the residual stress of pre-stressed dry grinding in general.

The full text can be downloaded at https://link.springer.com/article/10.1007/s40436-019-00280-3

Key words: Pre-stressed dry grinding, Residual stress, Finite element model, Grinding thermal field, Stress field, Phase transformation

Xiao-Liang Shi, Shi-Chao Xiu, Hui-Ling Su. Residual stress model of pre-stressed dry grinding considering coupling of thermal, stress, and phase transformation[J]. Advances in Manufacturing, 2019, 7(4): 401-410.

TrendMD

References

1. Zarudi I, Zhang LC (2002) Mechanical property improvement of quenchable steel by grinding. J Mater Sci 37(18):3935-3943
2. Thanedar A, Dongre GG, Singh R et al (2017) Surface integrity investigation including grinding burns using Barkhausen noise (BNA). J Manuf Process 30:226-240
3. Thang VT, Tuan NA, Tiep NV (2018) Evaluation of grinding wheel wear in wet profile grinding for the groove of the ball bearing's inner ring by pneumatic probes. J Mech Sci Technol 32(3):1297-1305
4. Zhang YB, Li CH, Jia DZ et al (2016) Experimental study on the effect of nanoparticle concentration on the lubricating property of nanofluids for MQL grinding of Ni-based alloy. J Mater Process Technol 232:100-115
5. Salonitis K (2017) A hybrid cellular automata-finite element model for the simulation of the grind-hardening process. Int J Adv Manuf Technol 93(9/12):4007-4013
6. Nguyen T, Zhang LC, Sun DL et al (2014) Characterizing the mechanical properties of the hardened layer induced by grindinghardening. Mach Sci Technol 18(2):277-298
7. Huang XM, Ren YH, Zheng B et al (2016) Experiment research on grind-hardening of AISI5140 steel based on thermal compensation. J Mech Sci Technol 30(8):3819-3827
8. Liu M, Nguyen T, Zhang LC et al (2015) Effect of grindinginduced cyclic heating on the hardened layer generation in the plunge grinding of a cylindrical component. Int J Mach Tools Manuf 89:55-63
9. Alonso U, Ortega N, Sanchez JA et al (2015) Hardness control of grind-hardening and finishing grinding by means of area-based specific energy. Int J Mach Tools Manuf 88:24-33
10. Li JP, Liu SY, Du CL (2013) Experimental research and computer simulation of face grind-hardening technology. Stroj Vestn J Mech E 59(2):81-88
11. Zhang Y, Ge PQ, Be WB (2015) Plane grind-hardening distortion analysis and the effect to grind-hardening layer. Int J Adv Manuf Technol 78(1/4):431-438
12. Ye BY, Peng RT, Tang XZ et al (2008) Residual stress and surface morphology of pre-stress hard cutting. J South China Univ Technol 36(4):6-9
13. Xiu SC, Bai B, Zhang XM et al (2015) Study of the surface hardening in pre-stressed hardening grinding combined machining. J Northeast Univ 36(1):86-90
14. Xiu SC, Shi XL (2015) Transformation mechanism of microstructure and residual stress within hardening layer in prestressed dry grinding. J Adv Mech Des Syst 9(3):1-13
15. Shi XL, Xiu SC, Dong L (2018) Study of pre-stressed dry grinding and its integrated hardening model of hardening layer. Int J Adv Manuf Technol 95(5/8):2529-2541
16. Shi XL, Xiu SC, Zhang XM et al (2017) A study of pre-stressed dry grinding and its characteristic mechanism of residual stress within a hardened layer. Int J Adv Manuf Technol 88(1/4):863-877
17. Ding ZS, Li BZ, Liang SY (2015) Phase transformation and residual stress of maraging C250 steel during grinding. Mater Lett 154:37-39
18. Masoumi H, Safavi SM, Salehi M et al (2014) Effect of grinding on the residual stress and adhesion strength of HVOF thermally sprayed WC-10Co-4Cr coating. Mater Manuf Process 29(9):1139-1151
19. Salonitis K, Kolios A (2015) Experimental and numerical study of grind-hardening-induced residual stresses on AISI 1045 steel. Int J Adv Manuf Technol 79(9/12):1443-1452
20. Martell JJ, Liu CR, Shi J (2014) Experimental investigation on variation of machined residual stresses by turning and grinding of hardened AISI 1053 steel. Int J Adv Manuf Technol 74(9/12):1381-1392
21. Evans A, Kim SB, Shackleton J et al (2005) Relaxation of residual stress in shot peened Udimet 720Li under high temperature isothermal fatigue. Int J Fatigue 27(10/12):1530-1534
22. Guo C, Wu Y, Varghese V et al (1999) Temperatures and energypartition for grinding with vitrified CBN wheels. Ann CIRP 48:247-250
23. Tang JM (2016) Mechanical and tribological properties of the TiC-TiB₂ composite coating deposited on 40Cr-steel by electro spark deposition. Appl Surf Sci 365:202-208
24. Hu CL, Zhao Z, Gong AJ et al (2015) Effect of warm deformation parameters and cooling rates on the recrystallization transformation microstructure in 40Cr steel. J Mater Eng Perform 24(1):505-516
25. Chen Y, Peng Z, Wu L et al (2015) High-precision numerical simulation for effect of casting speed on solidification of 40Cr during continuous billet casting. Metall Ital 1:47-51
26. Zhang L, Ge PQ, Bi WB et al (2011) Experiment and simulation on residual stress of surface hardened layer in grind-hardening. Solid Stat Phenom 175:166-170

[1]	Jin Zhang, Li Ling, Qian-Yue Wang, Xue-Feng Huang, Xin-Zhen Kang, Gui-Bao Tao, Hua-Jun Cao. Surface quality investigation in high-speed dry milling of Ti-6Al-4V by using 2D ultrasonic-vibration-assisted milling platform [J]. Advances in Manufacturing, 2024, 12(2): 349-364.
[2]	Lai Hu, Jun Zha, Wei-Hua Zhao, Xiao-Fei Peng, Yao-Long Chen. Multi-dimensional controllability analysis of precision ball bearing integrity [J]. Advances in Manufacturing, 2023, 11(4): 682-693.
[3]	Shailendra Chauhan, Rajeev Trehan, Ravi Pratap Singh. State of the art in finite element approaches for milling process: a review [J]. Advances in Manufacturing, 2023, 11(4): 708-751.
[4]	Chang-Sheng Li, Na Zhao, Liang-Chi Zhang, Jian-Jun Ding, Lin Sun, Duan-Zhi Duan, Cheng-Wei Kang, Zhuang-De Jiang. An analytical method for assessing the initiation and interaction of cracks in fused silica subjected to contact sliding [J]. Advances in Manufacturing, 2023, 11(3): 363-377.
[5]	Qing-An Yin, Zhan-Qiang Liu, Bing Wang. Prediction of temperature field in machined workpiece surface during the cutting of Inconel 718 coated with surface-active media [J]. Advances in Manufacturing, 2023, 11(3): 378-389.
[6]	Xue-hong Shen, Chang-Feng Yao, Liang Tan, Ding-Hua Zhang. Prediction model of surface integrity characteristics in ball end milling TC17 titanium alloy [J]. Advances in Manufacturing, 2023, 11(3): 541-565.
[7]	Zhi-Fu Xue, Min Lai, Fei-Fei Xu, Feng-Zhou Fang. Molecular dynamics study on surface formation and phase transformation in nanometric cutting of β-Sn [J]. Advances in Manufacturing, 2022, 10(3): 356-367.
[8]	Zi Ye, Yong-Guo Wang, Xin Yu. Study on the reaming process of aluminum alloy 7050-T7451 under different cooling conditions [J]. Advances in Manufacturing, 2022, 10(2): 272-286.
[9]	Ammar H. Elsheikh, S. Shanmugan, T. Muthuramalingam, Amrit Kumar Thakur, F. A. Essa, Ahmed Mohamed Mahmoud Ibrahim, Ahmed O. Mosleh. A comprehensive review on residual stresses in turning [J]. Advances in Manufacturing, 2022, 10(2): 287-312.
[10]	Yong-Cheng Lin, Jiang-Shan Zhu, Jia-Yang Chen, Jun-Quan Wang. Residual-stress relaxation mechanism and model description of 5052H32 Al alloy spun ellipsoidal heads during annealing treatment [J]. Advances in Manufacturing, 2022, 10(1): 87-100.
[11]	Jiang Guo, Bin Wang, Zeng-Xu He, Bo Pan, Dong-Xing Du, Wen Huang, Ren-Ke Kang. A novel method for workpiece deformation prediction by amending initial residual stress based on SVR-GA [J]. Advances in Manufacturing, 2021, 9(4): 483-495.
[12]	Sheng Cai, Lin Chen. Parameter identification and blanking simulations of DP1000 and Al6082-T6 using Lemaitre damage model [J]. Advances in Manufacturing, 2021, 9(3): 457-472.
[13]	Yan-Zhe Zhao, Kai Guo, Vinothkumar Sivalingam, Jian-Feng Li, Qi-Dong Sun, Zhao-Ju Zhu, Jie Sun. Surface integrity evolution of machined NiTi shape memory alloys after turning process [J]. Advances in Manufacturing, 2021, 9(3): 446-456.
[14]	Ji-Yin Zhang, Chang-Feng Yao, Min-Chao Cui, Liang Tan, Yun-Qi Sun. Three-dimensional modeling and reconstructive change of residual stress during machining process of milling, polishing, heat treatment, vibratory finishing, and shot peening of fan blade [J]. Advances in Manufacturing, 2021, 9(3): 430-445.
[15]	Hao-Yang Zhang, Nan Zhang, Wei Han, Hong-Gang Zhang, Michael D. Gilchrist, Feng-Zhou Fang. Characterization of process and machine dynamics on the precision replication of microlens arrays using microinjection moulding [J]. Advances in Manufacturing, 2021, 9(3): 319-341.