Experimental investigation of cutting parameters in machining of 100Cr6 with tangential turn-milling method

doi:10.1007/s40436-016-0134-9

Abstract

Abstract: The turn-milling methods for machining operation have been developed to increase efficiency of conventional machines recently. These methods are used especially by coupling some apparatuses on the computer numerical control (CNC) machine to decrease the production time and machine costs, ensure the maximum production and increase the quality of machining. In this study, 100Cr6 bearing steel extensively used in industry has been machined by tangential turn-milling method. This paper presents an approach for optimization of the effects of the cutting parameters including cutter speed, workpiece speed, axial feed rate, and depth of cut on the surface roughness in the machining of 100Cr6 steel with tangential turn-milling method by using genetic algorithm (GA). Tangential turning-milling method has been determined to have optimum effects of cutting parameters on the machining of 100Cr6 steel. The experimental results show that the surface roughness quality is close to that of grinding process.

Key words: 100Cr6, Tangential turn-milling, Surface roughness, Genetic algorithm (GA)

Vedat Savas, Cetin Ozay, Hasan Ballikaya. Experimental investigation of cutting parameters in machining of 100Cr6 with tangential turn-milling method[J]. Advances in Manufacturing, 2016, 4(1): 97-104.

TrendMD

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: https://www.aim.shu.edu.cn/EN/10.1007/s40436-016-0134-9

https://www.aim.shu.edu.cn/EN/Y2016/V4/I1/97

1. Kountanya R, Al-Zkeri I, Altan T (2009) Effect of tool edge geometry and cutting conditions on experimental and simulated chip morphology in orthogonal hard turning of 100Cr6 steel. J Mater Process Technol 209:5068-5076

2. Umbrello D (2011) Influence of material microstructure changes on surface integrity in hard machining of AISI 52100 steel. Int J Adv Manuf Technol 54(9):887-898

3. Mao C, Zhou Z, Zhang J et al (2011) An experimental investigation of affected layers formed in grinding of AISI 52100 steel. Int J Adv Manuf Technol 54(5-8):515-523

4. Mulik RS, Pandey PM (2011) Magnetic abrasive finishing of hardened AISI 52100 steel. Int J Adv Manuf Technol 55(5):501-515

5. Savas V, Ozay C (2008) The optimization of the surface roughness in the process of tangential turn-milling using genetic algorithm. Int J Adv Manuf Technol 37:335-340

6. Savas V, Ozay C (2007) Analysis of the surface roughness of tangential turn-milling for machining with end milling cutter. J Mater Process Technol 186:279-283

7. Savas V, Ozay C (2009) Researching the effects of cutting parameters obtained from MS58 Brass tangential turning-milling processes on surface roughness. Electron J Mach Technol Cover 6(4):65-70

8. Karaguzela U, Bakkal M, Budak E (2012) Process modeling of turn-milling using analytical approach. In: 3rd CIRP conference on process machine interactions (3rd PMI), Procedia CIRP 4:131-139

9. Mahesh G, Muthu S, Devadasan SR (2015) Prediction of surface roughness of end milling operation using genetic algorithm. Int J Adv Manuf Technol 77:369-381

10. Zhu L, Li H, Wang W (2013) Research on rotary surface topography by orthogonal turn-milling. Int J Adv Manuf Technol 69:2279-2292

11. Budak E, Armarego EJA, Altintas Y (1996) Prediction of milling force coefficients from orthogonal cutting data. J Eng Ind 118(2):216-224

12. Altintas Y (2012) Manufacturing automation: metal cutting mechanics, machine tool vibrations, and CNC design, seconded. Cambridge University Press, New York

13. Yuan SM, Zheng WW(2012) The surface roughness modeling on turn-milling process and analysis of influencing factors. Appl Mech Mater 117:1614-1620

14. Zhu L, Tang L, Su C et al (2008) Co-simulation of rigid-flexible coupling system for turn-milling center. In: Proceedings of the 7th world congress on intelligent control and automation June 25-27, Chongqing

15. Tekaüt I, Günay M, S? eker U (2009) Researching the effects of cutting tool vibrations in turning process on surface roughness. In: 5th International advanced technologies symposium, Karabük, pp 1293-1297, Accessed 13-15 May 2009

16. Quintana G, Ciurana J, Ribatallada J (2010) Surface roughness generation and material removal rate in ball end milling perations. Mater Manuf Process 25(6):386-398

17. Mansour A, Abdalla H (2002) Surface roughness model for end milling: a semi-free cutting carbon casehardening steel (EN 32) in dry condition. J Mater Process Technol 124(1-2):183-191

18. Alauddin M, El Baradie MA, Hashmi MSJ (1997) Prediction of tool life in end milling by response surface methodology. J Mater Process Technol 71(3):456-465

19. Chang H, Kim J, Kim IH et al (2007) In-process surface roughness prediction using displacement signals from spindle motion. Int J Mach Tools Manuf 47(6):1021-1026

20. Coker SA, Shin YC (1996) In-process control of surface roughness due to tool wear using a new ultrasonic system. Int J Mach Tools Manuf 36(3):411-422

21. Gologlu C, Sakarya N (2008) The effects of cutter path strategies on surface roughness of pocket milling of 1.2738 steel based on Taguchi method. J Mater Process Technol 206(1-3):7-15

22. Lou SJ, Chen JC (1999) In-process surface roughness recognition (ISRR) system in end-milling operations. Int J Adv Manuf Technol 15(3):200-209

23. Tsai Y, Chen JC, Lou S (1999) An in-process surface recognition system based on neural networks in end milling cutting operations. Int J Mach Tools Manuf 39(4):583-605

24. Benardos PG, Vosniakos GC (2002) Prediction of surface roughness in CNC face milling using neural networks and Taguchi's design of experiments. Robot Comput Integr Manuf 18(5-6):343-354

25. Chen JC, Lou MS (2000) Fuzzy-nets based approach using an accelerometer for in-process surface roughness prediction system in milling operations. J Comput Integr Manuf Syst 13(4):358-368

26. Holland JH (1975) Adaptation in natural and artificial systems. MIT press, Cambridge, pp 9-16

[1]	Fan Cui, Yu-Fei Gao, Da-Meng Cheng, Hong-Hao Li. Properties of cutting force, surface roughness and waviness in diamond wire sawing marble [J]. Advances in Manufacturing, 2026, 14(3): 674-696.
[2]	Yan-Jun Lu, Ming-Rong Guo, Yong-Qi Dai, Qiang Wang, Hu Luo. Experimental study on ultrasonic vibration-assisted grinding of quartz glass microchannel [J]. Advances in Manufacturing, 2025, 13(4): 701-717.
[3]	Zhen-Jing Duan, Shuai-Shuai Wang, Shu-Yan Shi, Ji-Yu Liu, Yu-Heng Li, Zi-Heng Wang, Chang-He Li, Yu-Yang Zhou, Jin-Long Song, Xin Liu. Surface quality evaluation of cold plasma and NMQL multi-field coupling eco-friendly micro-milling 7075-T6 aluminum alloy [J]. Advances in Manufacturing, 2025, 13(1): 69-87.
[4]	Xiao-Fei Lei, Wen-Feng Ding, Biao Zhao, Dao-Hui Xiang, Zi-Ang Liu, Chuan Qian, Qi Liu, Dong-Dong Xu, Yan-Jun Zhao, Jian-Hui Zhu. Surface roughness model of ultrasonic vibration-assisted grinding GCr15SiMn bearing steel and surface topography evaluation [J]. Advances in Manufacturing, 2025, 13(1): 88-104.
[5]	Feng-Yao Lyu, Zhen-Fei Zhan, Gui-Lin Zhou, Ju Wang, Jie Li, Xin He. Improved genetic algorithm based on reinforcement learning for electric vehicle front-end structure optimization design [J]. Advances in Manufacturing, 2024, 12(3): 556-575.
[6]	Jin Zhang, Li Ling, Qian-Yue Wang, Xue-Feng Huang, Xin-Zhen Kang, Gui-Bao Tao, Hua-Jun Cao. Surface quality investigation in high-speed dry milling of Ti-6Al-4V by using 2D ultrasonic-vibration-assisted milling platform [J]. Advances in Manufacturing, 2024, 12(2): 349-364.
[7]	Xue-hong Shen, Chang-Feng Yao, Liang Tan, Ding-Hua Zhang. Prediction model of surface integrity characteristics in ball end milling TC17 titanium alloy [J]. Advances in Manufacturing, 2023, 11(3): 541-565.
[8]	Vitor F. C. Sousa, Francisco J. G. Silva, Ricardo Alexandre, José S. Fecheira, Gustavo Pinto, Andresa Baptista. Experimental study on the wear evolution of different PVD coated tools under milling operations of LDX2101 duplex stainless steel [J]. Advances in Manufacturing, 2023, 11(1): 158-179.
[9]	Chang-Yong Yang, Zhi Wang, Hao Su, Yu-Can Fu, Nian-Hui Zhang, Wen-Feng Ding. Numerical analysis and experimental validation of surface roughness and morphology in honing of Inconel 718 nickel-based superalloy [J]. Advances in Manufacturing, 2023, 11(1): 130-142.
[10]	Jiang Guo, Bin Wang, Zeng-Xu He, Bo Pan, Dong-Xing Du, Wen Huang, Ren-Ke Kang. A novel method for workpiece deformation prediction by amending initial residual stress based on SVR-GA [J]. Advances in Manufacturing, 2021, 9(4): 483-495.
[11]	Long-Hua Xu, Chuan-Zhen Huang, Jia-Hui Niu, Jun Wang, Han-Lian Liu, Xiao-Dan Wang. Prediction of cutting power and surface quality, and optimization of cutting parameters using new inference system in high-speed milling process [J]. Advances in Manufacturing, 2021, 9(3): 388-402.
[12]	Guo Zhou, Chao Xu, Yuan Ma, Xiao-Hao Wang, Ping-Fa Feng, Min Zhang. Prediction and control of surface roughness for the milling of Al/SiC metal matrix composites based on neural networks [J]. Advances in Manufacturing, 2020, 8(4): 486-507.
[13]	Peng Lyu, Min Lai, Feng-Zhou Fang. Nanometric polishing of lutetium oxide by plasma-assisted etching [J]. Advances in Manufacturing, 2020, 8(4): 440-446.
[14]	Mirsadegh Seyedzavvar, Hossein Abbasi, Mehdi Kiyasatfar, Reza Najati Ilkhchi. Investigation on tribological performance of CuO vegetable-oil based nanofluids for grinding operations [J]. Advances in Manufacturing, 2020, 8(3): 344-360.
[15]	Wei Han, Feng-Zhou Fang. Investigation of electropolishing characteristics of tungsten in ecofriendly sodium hydroxide aqueous solution [J]. Advances in Manufacturing, 2020, 8(3): 265-278.

Experimental investigation of cutting parameters in machining of 100Cr6 with tangential turn-milling method

PDF

Knowledge

Cited

Abstract

Cite this article

share this article

Related Articles 15

Recommended Articles

Metrics

Comments