High-accuracy turning with slender boring bars

doi:10.1007/s40436-015-0112-7

Advances in Manufacturing ›› 2015, Vol. 3 ›› Issue (2): 105-110.doi: 10.1007/s40436-015-0112-7

High-accuracy turning with slender boring bars

Knut Sørby¹, Einar Sundseth²

1 Department of Production and Quality Engineering, Norwegian University of Science and Technology, Trondheim, Norway;
2 Sandvik Teeness AS, Trondheim, Norway

收稿日期:2015-03-11 修回日期:2015-05-05 出版日期:2015-06-25 发布日期:2015-06-13
通讯作者: Knut Sørby E-mail:knut.sorby@ntnu.no
基金资助:
The authors are grateful to Research Council of Norway for supporting this work through the "SmartTools" project (Grant No. 219309/O30).

High-accuracy turning with slender boring bars

Knut Sørby¹, Einar Sundseth²

1 Department of Production and Quality Engineering, Norwegian University of Science and Technology, Trondheim, Norway;
2 Sandvik Teeness AS, Trondheim, Norway

Received:2015-03-11 Revised:2015-05-05 Online:2015-06-25 Published:2015-06-13
Contact: Knut Sørby E-mail:knut.sorby@ntnu.no
Supported by:
The authors are grateful to Research Council of Norway for supporting this work through the "SmartTools" project (Grant No. 219309/O30).

摘要/Abstract

摘要： The paper presents the theoretical background for new approaches for achieving high accuracy in finish turning with slender tools. The approaches are developed especially for high-accuracy turning with vibrationsdamped boring bars with a length-to-diameter ratio up to 14. The approaches are based on established force models of turning operations and utilize a three-pass scheme where the deflection of the boring bar is calculated and compensated for in the final passes. Very good results are achieved in practical machining tests for a great variation of cutting conditions. Experiments show that the typical diameter error is 0.01 mm, even in situation where the tool deflection is 0.3 mm.

关键词: Turning, Precision, Boring bar

Abstract: The paper presents the theoretical background for new approaches for achieving high accuracy in finish turning with slender tools. The approaches are developed especially for high-accuracy turning with vibrationsdamped boring bars with a length-to-diameter ratio up to 14. The approaches are based on established force models of turning operations and utilize a three-pass scheme where the deflection of the boring bar is calculated and compensated for in the final passes. Very good results are achieved in practical machining tests for a great variation of cutting conditions. Experiments show that the typical diameter error is 0.01 mm, even in situation where the tool deflection is 0.3 mm.

Key words: Turning, Precision, Boring bar

Knut Sørby, Einar Sundseth. High-accuracy turning with slender boring bars[J]. Advances in Manufacturing, 2015, 3(2): 105-110.

[1]	Yong-Cheng Lin, Jia-Yang Chen, Dao-Guang He, Xin-He Li, Jian Yang. Marginal-restraint mandrel-free spinning process for thin-walled ellipsoidal heads[J]. Advances in Manufacturing, 2020, 8(2): 189-203.
[2]	Ali Kalyon, Mustafa Günay, Dursun Özyürek. Application of grey relational analysis based on Taguchi method for optimizing machining parameters in hard turning of high chrome cast iron[J]. Advances in Manufacturing, 2018, 6(4): 419-429.
[3]	Shuntaro Yamato, Yuki Yamada, Kenichi Nakanishi, Norikazu Suzuki, Hayato Yoshioka, Yasuhiro Kakinuma. Integrated in-process chatter monitoring and automatic suppression with adaptive pitch control in parallel turning[J]. Advances in Manufacturing, 2018, 6(3): 291-300.
[4]	Gergely Gyebrószki, Daniel Bachrathy, Gábor Csernák, Gabor Stepan. Stability of turning processes for periodic chip formation[J]. Advances in Manufacturing, 2018, 6(3): 345-353.
[5]	Cheng-Wei Kang, Feng-Zhou Fang. State of the art of bioimplants manufacturing: part II[J]. Advances in Manufacturing, 2018, 6(2): 137-154.
[6]	Ramanuj Kumar, Ashok Kumar Sahoo, Purna Chandra Mishra, Rabin Kumar Das. Comparative study on machinability improvement in hard turning using coated and uncoated carbide inserts: part II modeling, multi-response optimization, tool life, and economic aspects[J]. Advances in Manufacturing, 2018, 6(2): 155-175.
[7]	Cheng-Wei Kang, Feng-Zhou Fang. State of the art of bioimplants manufacturing: part I[J]. Advances in Manufacturing, 2018, 6(1): 20-40.
[8]	Ramanuj Kumar, Ashok Kumar Sahoo, Purna Chandra Mishra, Rabin Kumar Das. Comparative investigation towards machinability improvement in hard turning using coated and uncoated carbide inserts: part I experimental investigation[J]. Advances in Manufacturing, 2018, 6(1): 52-70.
[9]	Szymon Wojciechowski, Zbigniew Nowakowski, Radomir Majchrowski, Grzegorz Królczyk. Surface texture formation in precision machining of direct laser deposited tungsten carbide[J]. Advances in Manufacturing, 2017, 5(3): 251-260.
[10]	Feng-Tian Li, Li Ma, Lin-Tao Mi, You-Xuan Zeng, Ning-Bo Jin, Ying-Long Gao. Friction identification and compensation design for precision positioning[J]. Advances in Manufacturing, 2017, 5(2): 120-129.
[11]	Ravindra Nath Yadav. Development and experimental investigation of duplex turning process[J]. Advances in Manufacturing, 2017, 5(2): 149-157.
[12]	Yung-Tien Liu, You-Liang Kuo, Da-Wei Yan. System integration for on-machine measurement using a capacitive LVDT-like contact sensor[J]. Advances in Manufacturing, 2017, 5(1): 50-58.
[13]	Varaprasad Bhemuni, Srinivasa Rao Chalamalasetti, Pavan Kumar Konchada, Venkata Vinay Pragada. Analysis of hard turning process: thermal aspects[J]. Advances in Manufacturing, 2015, 3(4): 323-330.
[14]	Jing Li, Hui Qian, Biao Li, Nan-Yan Shen. Research on the influences of torsional deformation on contour precision of the crank pin[J]. Advances in Manufacturing, 2015, 3(2): 123-129.
[15]	Thella Babu Rao, A. Gopala Krishna, Ramesh Kumar Katta, Konjeti Rama Krishna. Modeling and multi-response optimization of machining performance while turning hardened steel with self-propelled rotary tool[J]. Advances in Manufacturing, 2015, 3(1): 84-95.

High-accuracy turning with slender boring bars

High-accuracy turning with slender boring bars

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价